Floating point on NT21 panel

[dr_sjajko 0]

Can someone help me? How to floating point CQM1H introduce the panel to NT21 thank in advance

[PdL 71]

You can't, decimal (integer) or HEX (BCD) are the only 2 methods available in the NT21 to display/set numeric data. Floating point data was only introduced in NS series. Use FIX/FIXL or FLT/FLTL instructions in the PLC to convert floating point data to 16/32 bit, and in case you want to convert to BCD afterwards use BIN/BCD instructions.

[dr_sjajko 0]

thank you PDL Can I use ASC (86) Instructions to convert a floating-point and then displayed on the NT21

[PdL 71]

I see what you mean, but there is no way as far as I know to get direct ASCII data to display on the NT21. There may be other tricks but I would not know. You have to remember NT21 is a pretty old screen.

[dr_sjajko 0]

OK. I know that the older display, I found another variant of displaying data. Many thanks for help