controlview builder software

[BDALE 0]

I have an application that was done using controlview builder ver. 3.11 Look to convert this application to rsview32. The tech note says my control view application has to be ver. 4 or later. My question does anyone have control view builder ver. 4 or later lying around. If so contact me ebarksdale@finchpaper.com.

[Ken Roach 194]

ControlView Builder 4.10 should be able to import and upgrade your project. It can be downloaded from the RA Knowledgebase (AID # 7780) by somebody with Distributor or higher access permissions. Your distributor's technical specialist or your local RA office should be able to get this for you easily. ControlView Builder runs only in Windows 3.1 and Windows 95; you may need an old computer or a virtual machine to get it to run, so you can just run the converter. If you can't get help on this locally, I can help out. I always recommend working with your local distributor; you can get a lot of help and favors if you're buying some new licenses or hardware.

[BDALE 0]

Thanks Ken, My suppiler is working on getting the software for me. Cheer,