ML 1500 IO configuration problem

[JasonHuang 0]

Can some body help me to fix this problem? Thanks a lot. CPU 1500 BWA I/O 1769-IQ32T*5, 1769-OB32T SLOT 1~5 is IQ32, SLOT 6,7 is OB32T Error message pop up when downloading progarm. Error message is " Slot 7 is too far from powey supply". After I removed slot 7 and dowload completed. But, program can't go Online. Error message is 0052 as below, "The base minimum series selected in the user program configuration was greater than the series on the actual base. Non-user error. Correct the base type, or Reconfigure the program to match the attached base." Thanks a lot.

[Mickey 71]

What's the complete catalog number and series of your controller?

[splicer480 0]

I've never gone over 4 I/O cards on a 1500 yet. The AB website says the I/O can be up to (8) slots away but I dont know if the onboard supply will handle all of that. You may need a power supply added to your unit....

[JasonHuang 0]

Thanks a lot. I remove solt 7 and change the PLC type as LRP series B. Now is okay. Slot 7 is spare IO.