Ge Fanuc 90 micro program

[Guest shoplifter]

Hi, I just got a Ge Fanuc 90 series PLC from an old machine at our company! The machine isn't needed anymore, so we stripped the thing! And there he was: an 28 port PLC from Ge Fanuc! Problem is that we bought the whole machine from a factory in Germany which is closed due to financial problems! So now I don't have a connectioncable and no software! First question: Which software is available (my OS: Windows 2000) Second question: What cable is needed? Third question: Who can deliver me free software, or where can I download it? Da Boriz aka shoplifter

[Steve Bailey 118]

You can download a copy of the DOS software for that PLC here: http://www.geindustrial.com/cwc/gefanuc/su...rsIO/lm90-d.htm The 15-pin port is RS-485, so you'll need a converter to interface with a PC's RS232 port. The pinouts for the port (and plenty of additional information) can be found in the manual GFK-1065f, downloadable from the same geindustrial site. http://www.geindustrial.com/cwc/gefanuc/su.../s90micro-m.htm