NS Error

[scottmurphy 1]

Hi, Recently we have been getting errors on a NS (See attached). The system version of this particular screen is 8.10. I have just downloaded V8.21, but will not be on-site until later in the week. What I would like to know, if possible, what is the cause of this error? I vaguely recall a similar error occurring when trying to open a screen from a macro or something similar that does not exist, but I don't think it is the case here, as the error used to tell you what the screen no error was.. We are using Datalogging on this unit to a CF card, and do have the WebGate function enabled also. The logging is not at any great rate, there are 4x groups configured as follows: Group 1 : 30sec, 4pens. Only logs on certain conditions Group 2 : 60sec, 5 pens. Logs always Group 3 : 60sec, 1 pens. Logs always Group 4 : 60sec, 1 pens. Logs always The operators have also been complaining that the screen is starting to consistently be slow updating, sometimes up to 5sec or more. Will the latest firmware solve this error, if indeed we can establish what the cause may be? Edited 24 Aug 2009 by scottmurphy

[dweste 0]

Slow updating could be your ethernet connection. Cable not 100%, or heavy network traffic. Or two identical IPs on the network (do-it-yourself network specialists).