PC LINK UNITS

[Jacques 0]

Hi, Could somebody please help with the pinouts when connecting a C1000 to a C200 via the PC link units. (C500 LK009 TO C200H LK401), and what is the difference between multi level and single level? I want to connect One C1000 to One CS1G.

[Harald_Brueck 0]

Please try to download W135 from www.omron.ca On page 8 you see multilevel is , if you have one PLC with 2 PCLink units. switch settings begin at page 25. Wiring is on page 39 connect a shielded twisted pair 5 - 5 - 5 - (B= + ) 9 - 9 - 9 - (A = - ) (Shield on FG)

[Jacques 0]

Hi Harald Thanks for the info, after a couple of long nights we got the link going between an Ancient and a new PLC, will do the change over next week.