Posted 7 Jan 2008 (edited) Hi Everybody. I have problem with install a PL7-2 software for programming TSX17 First installing a user interface from floppy is OK When I start installing a program then apperars error Fatal Error :214 C:\XDOSSYS\HLP\*.* What is the reason for this? OP system is Win98 and laptop is PII IBM ThinkPad I tryed also Win95 and other PC´s - result is same. I did everything like in this help manual Greetings Pertti PL7_2_V51.doc Edited 7 Jan 2008 by nizu Share this post Link to post Share on other sites
Posted 7 Jan 2008 Sounds like a bad disc. But then, it's erroring on the help files, which were really not much help anyways. Did you try to install booted to DOS or in a DOS window? Share this post Link to post Share on other sites
Posted 7 Jan 2008 I tryed both way,also another PC,shows same error. Pl 7.2 versions i have a maybe 10 different files downloaded from net. Under Win95 there was error : Fatal error :107 C:\Autoexec.bat I copied this Autoexec.bat from win98, then this problem was resolved. but still stops installing and shows this fatal error 214 C:\XDOSSYS\HLP\*.* I can´t understand what does means this *.* Share this post Link to post Share on other sites
Posted 7 Jan 2008 *.* is an old DOS wildcard meaning all files in a directory. Perhaps the directory doesn't exist on your diskette? Share this post Link to post Share on other sites
Posted 8 Jan 2008 No,inside there is directory XDOSSYS\HLP and this includes folders Eng,Fre,Ger,Ita,Spa Share this post Link to post Share on other sites
Posted 11 Jan 2008 How to uninstall this program and all those components. Does somebody have a correct software for programming TSX17-20 Share this post Link to post Share on other sites
Posted 11 Jan 2008 Uninstalling a DOS program is simply delete the directory it was installed to. As for programming TSX17, PL7-2 is the only way. Share this post Link to post Share on other sites
Posted 12 Jan 2008 Good morning, PL7 2 is the only way to program TSX17 indeed but there's 2 versions of this software. One for DOS and one for OS/2. Forget the dos version its a a pain in the booty to install it under xp, even if it's posssible. The best solution is to get Virtual PC from Microsoft, this soft is free now. Then you install an OS/2 image including XTEL and PL72 for OS/2. I have such an image so send me an email an we will see how to process eventually. JC Share this post Link to post Share on other sites
Posted 14 Jan 2008 Ok, i know that is pain under XP but I tryed also under Win95 and Win98 - no success! Any help is needed,my mail address laas@smead.ee Share this post Link to post Share on other sites
Posted 16 Jan 2008 It´s not so easy,after deleting is not possible to start Windows normally,because this User Interface making changes inside config.sys and Autoexec,also i think some changes are in Windows/Command folder Share this post Link to post Share on other sites
Posted 16 Jan 2008 Config.Sys and Autoexec.Bat are text files and can be easily edited to remove references to the PL7 items. No changes should be made to any Windows folder, as it's not Windows based software. Share this post Link to post Share on other sites
Posted 17 Jan 2013 Hello, I kindly ask if there any way to get the OS2 Xtel PL72 image, I need it for an old TSX17 28 PLC, I didn't find the file anywhere on the net. Thanks in advance. Kind Regards Share this post Link to post Share on other sites
Posted 17 Jan 2013 Hi, Send me a pm with your email adress. JC 1 person likes this Share this post Link to post Share on other sites
Posted 18 Jan 2013 Thank you, and sorry for being late Share this post Link to post Share on other sites
Posted 19 Jan 2013 Hello, Did you receive my PM? Best Regards Share this post Link to post Share on other sites
Posted 15 Feb 2013 Hi, Could I get the necessary software to program a TSX 47? Could you help me? Thank you Share this post Link to post Share on other sites
Posted 17 Aug 2013 Hallo, By any chance did you have this anymore? If you do, then can you send me a copy? Or (even better) those two discs for MSDos install? Please!!! Best regards Share this post Link to post Share on other sites
Posted 4 Jul 2014 Does anyone have the software for a TSX 47 (PL7 2, PL7-3) for DOS? I'm very grateful for any help. Share this post Link to post Share on other sites
Posted 10 Jul 2014 As has been discussed here many times (do a search!) there isn't DOS software. It only runs on OS2. Share this post Link to post Share on other sites
Posted 6 Oct 2016 Good day, I am new and long time passed but currently have similar issue. I need to retrieve program from eeprom cartridge of TSX17 2 4012 PLC. I couldn`t find original software and seems is obsolete. I have found it seems PL7-1 but I receive fatal error. The first welcome/start screen of user interface is ok but as soon as I press ok a fatal error appears. I am trying to set it up in VMWare player and dos is 6.22. If anyone could send me the PL7-2 software would really appreciate it and if any advise related the installation as well welcom. Share this post Link to post Share on other sites
Posted 21 Nov 2016 Again it only runs on OS/2 not DOS Share this post Link to post Share on other sites
Posted 16 Dec 2016 i would also love to have this file emailed to me if that is possible. would really appriciate it! mailasvensson@gmail.com Share this post Link to post Share on other sites
Posted 25 Sep 2017 Dear all, Could anyone send me a PM with a link to download the PL7-2 software? Thanks in advance and best regards, Matías Share this post Link to post Share on other sites
Posted 17 Jan 2018 Hi, I need to install PL7-2 for programming an TSX17 PLC. Please, could someone send me an OS/2 image including XTEL and PL72 for OS/2???? My email is americaserranogarcia@gmail.com Share this post Link to post Share on other sites
Posted 30 Apr 2019 Poderiam me enviar a imagem do OS/2 com XTEL e PL7-2 para OS/2?? fleidimir@hotmail.com Obrigado. Share this post Link to post Share on other sites