Search the Community

Showing results for tags 'weighing scale'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 9 results

  1. Hi all, I would like to know how to communicate scale indicator device mettler Toledo ind 320 using  module QJ71C24N-R4 by predefined protocal   I also tired to communicate in CH1 with the G.INPUT instruction to communicate when the device in MT continue mode it does communicate but I dont know how to convert value Now by trying modbus communication predefined protocal works fine but i cannot read data the is no SD/RD transmission happening  Can anyone help me with this  Thank you serial monitor.gxw serial monitor.gxw
  2. Please Help me, I want to connect aczet brand weighing machine CG203L to PLC CP1L-M. But several times I tried it didn't work, I've tried repeatedly in the settings section to adjust the baud rate and mode and have tried one by one but to no avail. Can any of your friends help? thank you
  3. Hello!   I have a humidity sensor 0-10v and his measurepoints is for 10 to 90 humidity %. Using the Analog Amplifier, I set his measure range but theres a problem... he's only givin me integers numbers, and I need the decimal one's to. On the Analog Amplifier, with that range the program says that the gain on the measure is 0.08 for each number on the analog input, theres a way to see that decimal places? I tried increasing the measure range to 100-900 and set the decimal case to 1 but the gain turns to 0.8, with that I just can take jump number like 10.8->11.6->12.4. How can i do this on the way that I need? It's an LOGO 8! After setting measurement range from 100 to 900:
  4. Hello - Not sure if this is the right place, I apologize if not. Just let me know if I need to move it and can delete and do so. But I am currently working on a project where I am collecting seeds (flower seeds, etc.) and when a certain weight limit is met I'll be turning off a vibratory bowl and opening a chute, etc. Looking for some ideas on the scale and how to do that process in particular. The smallest collection weight will be around 100mg, largest around 8g.  Mainly looking for ideas on the scale.  Thanks for any help/tips, much appreciate.
  5. Compare data RS232

    Halo, my name is Riandanu, I connect PLC Omron CP1E to weighing scale, and its done. i think i dont have problem between PLC and weighing scale. And i want to ask about, how to compare value from weighing scale ?  example : from the picture you can see value of weighing scale is " ST,+00160.66  g", and i want to compare it with 180 or 150 to give output on to lamp. Thankyou Riandanu       PLC to ek-i.cxp
  6. Hello guys, I have a system of 3 load cells (SP4M-7Kg) attached  to a Micrologix 1500 analog inputs. in the same PLC i have 3 coils for a vibrator, each vibrator is working with signal generators. and the load cells with an external 24vdc Power Supply. i see my load cells readings fluctuating too much even with the vibrator not working. if it is set lets say 70 Grams it is jumping from 68.4 to 74.8 going up an down never never stabilizes in one number, so i suspect am getting noise somewhere put a 100uF capacitor PLC inputs for the load cells but weight just increases more and more. How can realize where is the noise comming? what can i use as a filter? how can i improve this system? should i changed it to digital?   any help welcome! thanks.  questions?    
  7. Invert scale 0-990 --> 990-0

    Hello.  I have a D word number 0-990. I would like to convert it to 990-0. So i need a function which shows me 0, when the D100 is 990, and shows me 0 when the D100=990. And of course for the between values also. Calculating continiusly. Help is much appreciated :)
  8. Dear @ s good afternoon! You see I have a small problem, scale the signal of the plc manually using equation of the line and other steps, so I did a PLC Delta, but I've spent time in a PLC FATEK and apparently see it is more advanced and there is another way to do it using its simulator "WinProladder" to achieve it. So the question is: Can you help on how to scale using functions WinProladder for FBs-24MC plc Fatek? regards
  9. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software