Search the Community

Showing results for tags 'vijeo designer screen editor'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 114 results

  1. Axis Attribute Error

    Hello All, First time working with PLC. Get the hang of it from stuff I researched. Having an issue with an axis setup for a servo motor.  When I try to do an auto tune it gives me an error that axis is not configured.  Source: Config Fault    Condition: MotorDeviceCode- INvalid attribute      ACtion: Immediate Stop Fault Entry: Type 8, code 9 subcode: 1314 stopaction: 4 Statechange: 3   I was wondering what am I doing wrong? Any leads or source information I can use to solve this. 
  2. Hello, can you help me with the following issue: I want to transfer the program/data from an old E1043 HMI to a new one. Tried with HMI Tools File transfer, the connection is established but after initialization and loading I am getting an "Error:Read directory failed." Connection made by serial cable-serial cable / serial cable-USB, result is the same in both cases. Is there something to check in order to make the transfer? Can I use E-designer for this purpose, and, if yes, how? Any suggestion could be helpful. Thanks in advance!
  3. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  4. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  5. CX Designer Generic Popup Faceplate

    I was wondering if anybody out there has ever made a generic popup to deal with multiple devices, similar to what you can do with factory talk and wonderware. I want to be able to index addresses from the PLC to the PT memory but it doesn't look like you are able to do this. Is there anybody out there that has come across this same problem?
  6. Hi there, is there anybody who use macro function in NB designer? I need list of C language syntax who can be applicable in macro. I have a task to migration from NP designer to NB designer who use different languages. Thank you
  7. Hi. I can get horizontal scroll, but no idea how to get vertical scroll if I have more events than event window has rows. thanks for clue
  8. hi dears, I have one CS1D omron Redundant controller ( CP65H) that must be connected to NS15 Touch panel. I want to use Ethernet for connecting HMI and CPUs (CS1D-ETN21D). I have one question. for NS15 we can use CX designer and sysmac studio? is it true? which one is better? what is your recommendation for HMI software? Thanks.
  9. Control Panel

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
  10. Excuse me , can anyone help me .. I made Graphic program with CX Designer-NSRuntime. But I'm having trouble making auto save/downloads my graphic. Because  in NSRuntime Graphics there is no auto save command. Please check my screenshoot
  11. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  12. GT DESIGNER 3 - "SCREEN ERROR"

    Hey guys, I am trying to fix a problem with a machine for plastic jerrycans production, that i bought in the end of 2017 from a spanish company. That company refuses to help and assist us so i had to search for other solutions.  In short: i need to change a fixed value on the SCADA program of the machine to a variable value and i want to change it on the terminal i have installed on the machine (GOT 1000). The problem is dat whatever i change on the gt designer 3 file (if i move a button or a lamp 1mm to the side or change a letter) and then write it to GOT, when i try to open the screen where i did the modifications i get a white screen saying "screen error". Only replacing the new file for the original one i can continue to use my GOT 1000 normaly. I also wanted to translate some of the words because most of my employes dont know how to speak spanish and have some dificulty using the terminal correctly... I am corrently using 1.37P version of GT Designer 3 but the original file dat came already installed on the GOT was 1.165X.    
  13. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  14. hi guys.  I am getting a server problem while communicating pc & scada . is there any solution to rectify it? or problem is in license? thanks in advance
  15. TRANSFER FROM NS15-TX01B-V2

    Hello Forum,We have a NS15-TX01B-V2 at our Plant in Uganda which we are using with a CJ2M PLC. We want to take backup from the PT to PC using Ethernet but we have not succeeded yet. We have consulted the manuals but they are not very elaborate. Someone here may know the step-by-step procedure we can  follow. to achieve our goal. We shall be very grateful.Thank you.
  16. I have a NB7W HMI connected to a CPIH over RS232. I'm connected to the HMI over USB and when I try to download my project, it starts the downloading GUI process and fails at a random time and shows a popup that says "data reading error". The HMI is locked up at this point and needs to be restarted. This is a fresh HMI and has not previously had a program on it. I created a blank project to make sure I didn't do anything weird in my program, but got the same result when I tried to download. Has anyone experienced something like this before? Its made it as far as 50%, and has also failed almost immediately.   Thanks in advance. 
  17. Cognex VC5 Vision Controller

    I'm looking for some help in regards to programming an Omron PLC (CX-Programmer) to control a Cognex VC5 Vision controller to trigger CIC5000 cameras. I have the Ethernet/IP mapping and I am able to send user data to the VC5 controller at this point. I believe there a steps I'm missing within the Cognex Designer program to send notifications to the PLC but I'm not sure where to start. Any help in pointing me in the right direction is much appreciated.
  18. Helo All, Thanks for your support on my previous quiry. Iam now facing an issue with rotation animation of a motor in factory talk view. I have a screen containing 5 motors and good number of numerical displays. Numerical displays need to be updated just every seconds ,so i changed screen updation rate in SCADA as 1, changing so decreased my motor rotation speed. so do i have any other option to change motor animation fast keeping numerical display screen updation rate as 1 second?? i have used the tag  syste/blinkfast  
  19. Insert existing attachment A lot of automation cells we get done are made outside of shop so we don't typically have any current acd files for the plc. I am trying to make changes to the program but uploading seems to be giving me some problems. The initial upload seems to work fine I can select a file to save to and I begin to see the file being upload, the problem comes after about two minutes near the end of the upload. Attached is the error I see after the upload stops. Has anyone seen this problem before and know of a solution? Any help would be appreciated. Current controller Studio 5000 Logix Designer 28.03.00 1756-L71S
  20. Is there any way of viewing a remote Proface GP or LT screen inside a second GP or LT screen? I want to do this to avoid creating and loading duplicate screens. Essentially it would be like using GP Viewer-EX where the PC is replaced with another GP or LT unit.
  21. Dear Everyone can help     i have a batching system of about 12 materials and i need to generate a report for all batches in the day in runtime, i tried using SQL with Cicode but sometimes i can't find some material's data or to be Zeros. did any one here know a way to do that?? vijeo citect 7.4 thank you
  22. HELLO GUYS . I am new in mitshubishi HMI gx designer 3.I have made simple program in which memory bit m0 is used to start counter (limit 5) and M1 bit is used to reset counter. Now when i press reset switch (M1) first it will ask for password then it will reset counter. how can i do this..please suggest. thanks 
  23. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  24. HMI GOT1030 Windows Screen

    Hi, I am currently working on window screen. I don't know how to disable function of closing the window (see attached red screen). The window screen is showing by pressing button on input. My settings are shown on the screens below.  
  25. Hi my dear colleagues, I tried to configure data location for the text file used with text display. It works if loaded to main drive. But, if I point to secondary or optional drive the system doesn't even allow me to download the program to HMI. Error 1850..secondary drive not found. I noticed in the property inspector, that the windows for Secondary and Optional drive are grey. The Vijeo Designer V6.2 and HMIG3U with three USB ports (one mini and 2 usual) and one SD port are used.  May be, they are all disabled somewhere, with a hardware switch? But, even if the windows were active, I have no idea, what to put into them, to configure SD or USB as secondary or optional drive. Please, help. regards, Waldemar