Search the Community

Showing results for tags 'version 13'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 13 results

  1. Hi guys, any related website were i can download RSLogix English 500, i need to work on my AB 1400
  2. Hello friends; I have an original program in version 10 now i want to convert it in version 16.03. On my laptop i have installed both version. Which menu makes me able to change the program version offline. When i go online the controller firmware is in version 16 and it ask update firmware before download the version 10 program.  how i convert version 10 program into version 16 offline then i download into the controller?   Regards
  3. Factory Talk Linx 6.0

      Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  4. Hi   First post in this forum - hope I'm not duplicating topics..... I've had prior experience with Siemens S7 Tags for I/O allocation - how is it done for the M340/Unity setup please ie how do you assign a physical address (say %I.0.1.5) to an input in the program? I imagine it is somewhere in the 'Configuration' section where I have defined all the modules?? I find the standard help quite hard to follow and find what I'm looking for - anyone have any better documentation. Also I am feeding a quadrature encoder output into a high speed counter module - any tips/examples of suitable program structure to use? Thanks for listening.... Andy  
  5. version incompatible

    I'm supposed to send the software from one machine to the other. The Dwonload but who does not want to open with the CX Programmer: comes version incompatible. But I do not want to pay 700 € for an update I just want a tool that allows me to send this data in the other machine. Weir has an idea or who helps me I pay the service. The machines are in Austria in Saint Pölten.
  6. Highlighted line in GX Developer

    Working in GX Developer Version 8.107M, some of the code that I have been working with seems to be hidden.  It appears that the lines turn highlighter yellow, keeping me from viewing code.  I've looked into this and cannot find a solution.  Does anyone know how to expand the code? Thank you.
  7. GT2708-STBA

    Hi. I have a GOT 2000 (GT2708-STBA ) with the version BootOS 1.17.00.R001.-Z i need to change versio more old.    How do I make the change?  
  8.   I need the Add-on to the modicon M258 with version 2.0.31.15  Where can i download i am not finding the site of schneider  
  9. Hi, Where can i find version release notes for sysmac studio  latest version   -GS
  10. Hello,I am trying to use ProWORX NXT to view the logic of my Modicon Quantum 534 controller online. When I try to go online with it, it always times out. I am using a TCP/IP connection and my PC is in the same subnet as the controller in question. I can ping the controller's IP address just fine and when I use ProWORX NXT's Net Scan function, it recognizes that there is an Ethernet connection at that IP address but doesn't recognize it as a Modicon controller.Weirdly enough, my PC can connect to another Modicon controller of the same type and in the same subnet just fine.Can anyone help me with this issue?
  11. Panelbuilder 32

    I am in the learning phase of HMI and PLC programing and am trying to use some of the hardware that has been donated to me. I have an AB panelview 300 micro terminal and a Micrologix 1000 Plc (they are not tethered yet). I have constructed a small test board with everything mounted to it and have successfully written and downloaded a simple project to the plc with timers, etc.   Now I need to find a way to program the terminal to make changes to the program.   I am looking for some free panelbuilder 32 or anything that will allow me to program the terminal and use it.   Can anyone help me? All help will be greatly appreciated!
  12. Good morning, I'm having an odd issue with CX Programmer and have hit a wall. I'm trying to upload a previous version of a program to an existing PLC (CS1G-H CPU42) and I keep getting the following error when I compile while online: "The read protection properties which are not supported by the connecting target PLC are set. Check the unit version of the PLC." This prevents the program from being uploaded. I have a first revision CS1, manufacture in 2005 from what I can tell. This exact program has been uploaded previously, but a modified version replaced it recently and I need to go back to the older version. Things I have tried so far. without success: - Removed UM Protection - Made sure Task protection is off for all tasks - Check DIP Switch #1, which is write protection, and made sure it is off - Used "Remove Password" and "Release access" functions from the PLC/Protection menu - Used the auto-verification to confirm the configured PLC is correct - Reuploaded a full backup of H & D memory, from the older program I am able to compile the program when offline, but it chokes when online. I am connecting to the PLC via a serial cable. I haven't found any help from the CX Programmer help, or the CS1 programming and operation manual. This error message is nowhere to be found. Anyone has a clue ? I'm at a loss right now. Thank you !
  13. Hi, I have a challenge with GX developer version 8.63R (SW8D5C-GPPW-E). I'm trying to verify 2 projects (offline). Some programs I know there are changes but they are not shown in the verification. In 1 program I did see the last checked change was in step 1496 (next change I did see by manual check was step 1502. it seems like this type of verification is limited to 1500 steps to check. Is there any way I can make this offline verification work? the most progams that we have in our project are over 2000 steps. big thanks in foreward