Search the Community
Showing results for tags 'user web interface'.
Found 41 results
-
Hi, I’m trying to control 10 Safety switchgear using AS interface, and since I’m using Beckhoff as a PLC I want to use "KL6211 | AS-Interface master terminal" as a Gateway but since this is the first time I’m using Beckhoff I’m a bit lost, So my questions are: - Is it a good idea to use a Beckhoff ASI terminal? - How to configure it? - Is there a possibility to configure it using embedded PC ( I’m using CX2030)? Excuse my English.
-
Hello! I want to make a really simple PLC program that compare 2 number. How can I load 2 numbers from user and send to PLC compare operand? Now I go to CMP and with mouse set values. There is any "imput" component in CX Designer? Sorry my poor english :S Thank you!
-
Hello everyone, I was wondering if anyone here could explain to me how I can program my human-machine interface (HMI) to revert to a Home Screen after a period of inactivity. If the user has to leave at any time, and leaves the HMI on the last screen he/she was working on, I want the HMI to revert back to my Home Screen after 60 seconds inactivity. Has anyone here done anything similar to this before? Do you think it's worth the trouble of having such a function built into the HMI? Thank you for your time and for reading.
-
HMI-GTO Change user password via script
satiat posted a topic in Modicon / Telemecanique / Schneider Electric
Hi everyone, I would like change user password on HMI GTO via Vijeo script. I don't know which variables store the password. Anybody as an idea? Thank you in advance -
Hi guys, I'm in the middle of a little university project, I'm attempting to implement a control system purely based on artificial intelligence. A neural network will be used to map the characteristics of a power plant. A fuzzy logic controller will be used instead of the conventional PID and finally a genetic algorithm will be used to tune the controller while the system is online. This is all simulated of course. Each of those AI's will be developed in Matlab. Only problem with that is, is it outputs the code in C or C++ (From memory). I would have to convert this to structured text (Based on Pascal). So to circumvent this problem I thought I would just directly interface matlab to the PLC (Schneiders M340). My idea being, all the calculations are done in matlab which are then sent back to the PLC. However this presents me with a new problem of how I would be able to interface matlab to the PLC. If anyone has experience with this sort of connectivity, any advice would be greatly appreciated. Thank you in advance, Luchek
-
Hi I have a big issue with machine user access using loggin and password. There are different levels of login (operator, maintenance and admin) locked with physical key or password. The problem is that whenever any other user sees the password or got the key he can use it later. Is there another efficient way to lock the access and may be record who is logged when and how? Thanks
-
TIA Portal WinCC Flexible connections for communication PLC and HMI
tecnoplc posted a topic in Siemens
How to configure the connections between the PLC and HMI in the draft TIA Portal WinCC Flexible depending on the type of network we are connecting the touch screen. Read more and have a look to this... http://www.tecnoplc.com/conexiones-wincc-flexible-comunicacion-plc-y-hmi/ -------------------------------------------------------------------------------------- www.tecnoplc.com -
PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc. It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems). For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices. (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc. All the MB public/native function codes are supported. 32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic. Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later. Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services -Other Non-AB communication drivers for serial or TCP -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
-
how can i make a run time page in vijeo citect 7.4 accessable only by one user ..... please give me detailed steps for this opertaion from creating the user till the end , thanks in advanced
-
Hello everybody, As many of you can see, I took a course onto development the user libraries, that able to simplify extremely a PLC programming process, to help programmers to increase a productivity of their labor, to reduce a program code and quantity of used system variables, to improve readability of programs. A part of libraries has been already developed and looks fine. Also I full with new ideas, plans and could design new and new that then to share these libraries with other programmers. The work is bringing me a pleasure, however, at current situation I can not allow for me to share the libraries for free. I can explain why. First of all, it takes my time, which is money, and I should feed my family, also the work eats a health, which is not infinitive. The second, those who can get it for free, will not appreciate the labor and will distribute it to the left and to the right. The third, ME has not an interest to my offer, to the products and doesn't want to help to make it available for all. What I'd like to propose to you: If you have an interest, I can offer to open a subscription to the ready and new libraries, which will be developed further. What I can promise and guarantee: I will collect wishes and requirements of subscribers and all can vote, what should be realized at first. The subscribers will can get a release with up to four small libraries or one big (for example, such like Modbus Master/Slave library) every month, that will fit to the requirements and the collective choice. What's a payment for the subscription? I suppose a fee in 100 USD per annum will not be predatory for a subscriber's pocket. The fee will cover costs in case, if the number of subscribers will exceed 70 people. Thanks to all for the attention and I'd like to offer to discuss the proposal in this topic.
-
FB_TIMER_ON_OFF The FB is a part of RTC library and implements a timer, based on RTC, for ON and OFF a control bit, e.g. to turn ON/OFF a load in the time interval, and can be easily added into your program in desired quantity. The FB is supplied with E (Enable) input, EO (Output to Control Bit), and can operate in one of two modes: HMS = Hours + Minutes + Seconds (daily timer) MDH = Month + Date + Hours (yearly timer) Each setpoint of ON and OFF time settings should be represented as Array of INT [0...2] type and contain a time data according to the chosen mode. Thus, for example: - in HMS mode: a control bit can be turned on at 02:03:14 am and then turned off at 06:04:17 pm, or turned on at 05:12:27 pm and turned off at 07:06:22 am; - in MDH mode: a control bit can be turned on 3th February at 02:00 pm and then turned off 4th June at 05:00 pm, or turned on 12th November at 03:00 pm and turned off 6th March at 10:00 pm. If the values of both time settings are the same, the FB output will not be activated. Supporting PLC CPUs: All FX Program memory: - 34 steps per each FB instance - 4 steps for entire project (reading from RTC) System variables: M - 3 bits (for entire project) The library is compatible with GX IEC Developer and GX Works2 software . https://plus.google.com/105445006108716761629/posts/Z4v4F11s4Bz
-
Progressive user libraries for signal processing of FX-series analog modules
Inntele posted a topic in Mitsubishi
https://plus.google.com/u/0/collection/oCtiX To be continued... -
Hi friends, I am a little new to WinCC. I am using a WinCC RT Advanced license within TIA portal v13.1 I need a little help in my current project as described below. I am attempting to create a faceplate of a solenoid valve,, The "Valve" is a user-defined data-type with the following 4 elements 1. Cmd - or command. - Bool 2. Cls_Fb - or Closed -Feedback -Bool. 3. Aut - or Automatic Mode -Bool 4. FTC - Fails to close -Bool. I tried the following procedure as described in TIA portal help.. Method -1 1. I created a User-defined data type called Valve comprising of the above 4 bool elements. 2. In the graphics I made a image of solenod valve with one rectangle (solenoid) and one polygon for valve body. 3. Under the Faceplate Properties (See figure attached) I inserted a property ang gave it the data-type Valve as above. However, when I drag a property from the 'Contained objects list' to the interface side, it is not getting substituted. such as the Rectangle_1 's background color I try to associate with the interface property Valve.Cmd. It does not get assigned when dragged. Since this does not work I tried another approach, Method -2 I attempted to declare a variable tag of UDT type 'valve' in the faceplate's tab Tags. I found that it is not possible to declare a local variable of User-defined types here. Please guide me how to proceed. Thanks for looking in and best wishes for your success. Regards, Raj S. Iyer
-
I have a project that currently has a PC using C++ to send commands over to a Motoman Robot for palletizing. My customer wants to get rid of the PC since no one on the plant floor can troubleshoot if the PC goes down. They're asking that I put a PLC in in lieu of the PC, and control from there. The PLC and respective code is no problem, where I'm stuck is gathering info on what protocol I can use on the Motoman. My goal is to make the Motoman as "dumb" as possible and control everything from the PLC. Can anyone tell me what protocol I can use with the Motoman, details below: Robot Type: EPL80Controller Type: NX100Software Version: NS4.02 A(JP/US)-00
-
I have encountered memory backup battery failure/fully drained in MITSUBISHI A2SH PLC.So RUN LED started flashing on PLC. Thus no field parameters values were being shown on HMI. I connected PC with PLC through serial RS232 cable using GX DEVELOPER 8 , the connection test was successful. Then I tried to download my project saved on PC to PLC, then I was amazed as It asked for a keyword. However when the backup battery was working , I downloaded the same project but it did not ask for any keyword. Can anyone explain this. Now the real problem is that the program was developed by somebody long ago , to whom I don't have any contact right now and I m helpless as I don't know the keyword and can not download the program and thus my machine is at halt. I tried to clear the user memory from online menu , but it says the function not supported. I m stuck and frustrated . Anybody 's help is greatly appraised in anticipation. Of course I m not asking for hacking a keyword. Just to know how can I make my system functional. Thanks everybody.
-
Change / edit users security factorytalk view - how to
_Laurie_ posted a topic in Allen Bradley / Rockwell Automation
Hi all, First post: I just want to know if there's a way to edit/change the users (security) in factorytalk view studio (using version 7.00.00 CPR 9 SR 6) Because we use different terminals some of the users are on some but not on others and there are instances of duplication with differing passwords as well as redundant users, I want to standardise all of them on each laptop, I cant however see how to modify or delete any. Do I need to restore the directory or something? I couldn't find what I specifically wanted in the search Thanks in advance for any help, Laure
