Search the Community

Showing results for tags 'universal robots'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 5 results

  1. Error handling with UR polyscope

    Good day everybody, Recently I have been working on an application using a CB-series UR. I have an issue where the robot tries to pick up a piece using a vacuum gripper, and in the case that the robot either doesn't detect the piece, is unable to pick it up or loses grip on it, there needs to be a way to handle this error case and go, for example, to a safety position or turn on an alarm. The problem is that I have been unable to find a correct way to implement this error handling. The best I could do was to just halt the program execution, but this is not satisfactory for this purpose. Does anybody have any tips on how to interrupt the program, switch to a different case or similar? Specifically, I have been working using the Polyscope pendant and have found difficulty programming anything remotely advanced. Thanks in advance!
  2. Hi gays. I have a problem with my indradrive when I try to jog a Rexroth MSK motor. Indradrive: HCS02 (Basic Universal, single axis), control unit: CSB01.1C-SE-ENS-EN1-L1-S-NN-FW     &      power unit: HCS02.1E-W0012-A-03-NNNN Servo motor: MSK100B-0200-NN-S1-BP0-NNNN For joging (testing the motor in closed loop servo just with pc), I think need to run easy startup mode under the commissioning tab of indraworks software. (or am I wrong?) I connected the drive  via serial interface (out of the drive X2 connector) to my pc, and connected the drive to motor encoder port (out of the drive X8 connector).  I power on the drive (via X13) and go to easy startup mode, I face an "F3130 Error when checking input signals" alarm which I can not clear till now. referring to online help  I find some remedies declares that the problem arise from wiring. I tried to examine X41 connector with supplying 24v to it in various situations. but the mentioned alarm is resisting. anyone can help?   
  3. Hello,             I need to communicate Power meters ( GE Multilin EPM 5500P) to  GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the  Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance  mnetman-a3.pdf multinet (1).pdf PM-GE.pdf
  4. So just for anyone might interested, this past one year Omron had completely acquire Adept Robotics (California based robot manufacturer). The products acquired including all Delta Arms and SCARA (Quattro, Hornet, Cobra), also some Articulated / 6-axes robots (Viper), programmed with the ACE software. Other than that Adept also have Lynx AIV whose name is now changed to LD-Series. Aside from having an already established Robot Controller with by acquiring Adept, Omron also developing it's NJ CPU to control mechanical arms that can be user-built, with condition that it uses EtherCAT based Servo Control. The current version of NJ501-4XXX series PLC supports control over Delta Arms (3-axes + Rotation, 3-axes, 2-axes + Rotation, 2-axes), SCARA, and your usual Gantry XYZ+Rotation robot.   If anyone interest to discuss something about those do post here, or maybe create your own thread.
  5. I need to control the robot UR3 universal robots by a PLC Siemens S7-1200. for the momento I want to control the robot by digital signals: satart, stop, but in the future I need to control it by Profinet. Could someone help me to find the solution?? I have a lot of information about programming PLC and HMI, http://www.tecnoplc.com/comunicacion-profibus-hmi-s7-300-tia/ , http://www.tecnoplc.com/parametros-comunicacion-tia-portal-ip/ , but I need help about robot programming... Has anyone some example about how programming this robot?? thank you a lot. You can send to me the information at email: proyectos@tecnoplc.com ____________________________________________________________ PLC and HMI programming www.tecnoplc.com