Search the Community
Showing results for tags 'tools'.
Found 4 results
-
Dear PLC forum. I have an issue with a customer who has bought some equipment with CQM1H-CPU61 installed. In order to program certain changes the device requires the password. Both I and the customer have contacted Omron but the only solution from their side was to buy a new system. As I have managed to find via googling the password can be recovered with Plc Backup Tools V6.0 software. Does anyone have the installer for this software and are they willing to share it with me? Thanks in advance.
-
Hi All; Does anybody here have a copy of Fast tools 10.02. It can like Citect be run for 1 hour in demo mode which is ideal to asses its capability. We are looking at having to use it but would like to review in demo first. Local Distributor is not providing much assistance.
-
Yokogawa Fast Tools SCADA Modicon 140CPU53414A data communication problem Modbus TCP
SpicyChili posted a topic in HMI & SCADA
Dear Fellow Forumers, I am having a common problem with sending/writing data to all Modicon 140CPU53414A PLCs from our Yokogawa Fast Tools SCADA. For Example, when I write a Value(at first, value was "FALSE) "TRUE" to a modbus register, after few seconds it went back to "FALSE" and after a few seconds again, went back to "TRUE"(at this time, this "TRUE" value sent to PLC) We are using here also Ethernet Module 140NOE77101 which we used also to all PLC with Modicon 140CPU67160 but no issues like this occured. Is there any adjustments that should be made for the PLC? in Yokogawa Fast Tools SCADA, We tried to increase the value for SIGNAL_GAP(a file is attached for description) from 20 to 200(nearly maximum which is 240bytes) and writing/sending data is now ok but not all the time, so sometimes it is still having issues like that. Thanks!-
- modicon fast
- tools
-
(and 2 more)
Tagged with:
-
I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks
-
- i have restored a crashed ifix to a new pc. the restore is ok and installed ge9 driver. with the ge9 power tools we can observed that data transmits and recieve. the problem is that the screen scada is not updating i.e. no status/feedback
- anything is happening. the lan network tcp/ip was configured i.e. ip
-
(and 1 more)
Tagged with:
- i have restored a crashed ifix to a new pc. the restore is ok and installed ge9 driver. with the ge9 power tools we can observed that data transmits and recieve. the problem is that the screen scada is not updating i.e. no status/feedback
- anything is happening. the lan network tcp/ip was configured i.e. ip
- subnet and gateway. any remedies/advice is most welcome. please provide a guide on the communication/configuration setup. thanks