Search the Community
Showing results for tags 'tools'.
Found 2 results
SpicyChili posted a topic in HMI & SCADADear Fellow Forumers, I am having a common problem with sending/writing data to all Modicon 140CPU53414A PLCs from our Yokogawa Fast Tools SCADA. For Example, when I write a Value(at first, value was "FALSE) "TRUE" to a modbus register, after few seconds it went back to "FALSE" and after a few seconds again, went back to "TRUE"(at this time, this "TRUE" value sent to PLC) We are using here also Ethernet Module 140NOE77101 which we used also to all PLC with Modicon 140CPU67160 but no issues like this occured. Is there any adjustments that should be made for the PLC? in Yokogawa Fast Tools SCADA, We tried to increase the value for SIGNAL_GAP(a file is attached for description) from 20 to 200(nearly maximum which is 240bytes) and writing/sending data is now ok but not all the time, so sometimes it is still having issues like that. Thanks!
I have restored a crashed IFIX to a new PC. The restore is ok and installed GE9 driver. With the GE9 power tools, we can observed that data transmits and recieve. The problem is that the screen scada is not updating i.e. no status/feedback, anything is happening. The LAN network TCP/IP was configured i.e. IP, subnet and gateway. Any remedies/advice is most welcome. Please provide a guide on the communication/configuration setup. Thanks