Search the Community

Showing results for tags 'time stamp'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 29 results

  1. OK,  I have a program in a Control Logix 5561 controller(ver. 19.52) that every time we go online with it, the communication between the PLC and the PC running RS5000 is so slow you cannot navigate the program efficiently. I am new to this facility but I noticed the programmer used 20 different periodic tasks to organize their program, mostly running at 30ms intervals. several are set to 10ms and some are even set to 3ms. I have gone through and found out that the short interval tasks have been overlapped 10's of millions of times, and the combined total of all scan times is over 160ms. I have a strong feeling this could be causing our comms bog down and possibly other erratic behavior but would like a second opinion. This machine has 2 indexing dials, with work stations that do work between indexes, Pick and Place operations, etc.  Is there even a need to be running these with periodic tasks? All thoughts are appreciated. Thank you
  2. Hello, I am having an issue with FIX Dynamics Real Time Database and the database columns available within when trying to query the database. On a system running iFIX 5.0, there are 19 data columns available, LHS of attached screenshot (in the screenshot example, crystal reports is used to view the columns). However in iFIX 5.9, only 15 columns are available (RHS of attached screenshot ), how can these missing columns be made available to be accessed? Regards, John
  3. I'm very new to sysmac. I am trying to display the current date and time in the corner of each of my HMI pages. I saw a button labeled date and time. It is asking for a variable for behavior. Do I need to write some basic structured text or FB in plc to get date and time and pass it over? I figured the button would update itsself since when I placed it on the screen it had the current date and time and refreshes every time I leave the page and come back. 
  4. Hello         I'm new for PLC, I need to set pump turn ON/OFF  in 4 time/day every day => [8:00-8:10]a.m, [11:00-11:20]a.m, [2:00-2:10-14:10[p.m, [5:00-5:20]p.m ** I have Omron PLC CP1E-N30 , Could you advise me, please ?  
  5. There have been many good discussions on the applicability of cloud-based solutions for manufacturing and process control systems. On one side, some people have concerns regarding security and control of the information, on the other side, there are identified benefits enabled by cloud systems. From VMS minicomputers to DOS and Windows, from ArcNet to Ethernet, it is inevitable the industrial automation systems shall adopt the technologies that are getting predominant in IT general use; the current environment that I am calling the “Cloud-iPad era” is no different; therefore the practical discussion is not if those new technologies will be applied in the industrial environment, but how. This paper is not intended to join the conceptual discussion about the cloud, but just to present a few simple practical examples, where cloud technologies are already enhancing industrial automation solutions and enabling new business opportunities. CloudPracticalApplications.pdf
  6. Anyone with knowledge of a VBA Run-time error '4205'  Can't find the project database! VBA stops at gTagDb.GetTag  Here are some things I already tried.  Cleared the CACHE files in the project.  Deleted .CAC file in TAG folder,  Removed Watcom SQL 4.0 from ODBC User DSN.  Uninstall and Re-install RSView32 Works 7.50 and then upgraded to 7.60.  
  7. Real world simulator

    When we simulate a plc program we have to manually input the changes in input(like magnetic reed switch) For example when a cylinder goes from up to down reed turn OFF and reed down turns ON Is there any program available where we can define such things that will turn on and off during the process automatically.
  8. CX SUPERVISOR

    HELLO ALL I HAVE PROBLEM CX SUPERVISOR RUN TIME WORKING WHEN I OPEN RUN TIME AFTER 2 OR 3 HOUR IT WILL STOP AND COMMUNICATION CUT FROM PLC I USE OMRON PLC AND MT NETWORK  SETTING IN PLC  ETHERNET (FINS/TCP)  I GIVE ONE IP ADDRESS  172.17.0.85          AFTER CUT COMMUNICATION THIS MESSAGE WILL COMING MY PC    - COULD NOT WRITE TO PROJECT FILE. THE DISK IS FULL,WRITE-PROTECTED OR HAS BEEN REMOVED FROM THE DRIVER  ple told me some one  how to salve this problem    
  9. Hi every body. I want to get and set Time Picker value in process analyst in citect scada using cicode. Also  I tried to find an event or function when time picker value is changed , is called but find nothing. May you help me please?
  10. Tia Portal V14 Real time graph

    I current have 2 variable: Displacement vs Pressure. I need to draw a real time graph on Comfort Panel. The problem with using just f(x) trend is that the minimum time between updating a point is 0.5 sec and that is for ever in my application as the whole cycle last only 5 sec and I have to plot 500 points in that time. Is there a way to do real time graph using Historical data without any time delay. If anybody can guide me through any sample program or material would e helpful. Thanks
  11. Hi All, On our plant, we are using one Rockwell  PLC model 5573 with HMI(Allen Bradley 1500P). I am automation engineer but I did not work on the Rockwell PLC. Now I am planning to install the GPS clock on our plant. And I want clock will synchronize our Rockwell plc as well. Could someone advice what is the best option for this model to do the time synchronization.   Thanks in Advance, Warm Regards/Waqar
  12. Hi.  I am quite new to Sysmac Studio. Working on my first project with it now, coming from CX-series.  I have got one problem i can not find a solution to. On the NA-HMI I want to have an input display where i can input a time of the day.  As far as I can see NA do not allow me to use "TIME_OF_DAY" variables in the Data Edit component. Is there a solution to this? 
  13. Cycle Timer

    Hi all, I try to realize a cycle timer. A counter is triggered by a movement ( clamp close ) Then the machine does it things, piston here, and there and when the clamp closes again it should show me the real cycle time. Is there a timer/counter that is independent from the PLC cycle? I am using a CJ1M CPU11 Ver. 3.0
  14. Convert time

    Hello. this is my firs post is possible to convert the elapsed time of timer to real or int i need to make some math operation with the elapsed time thanks  
  15. I would like to use the actual Cycle Time (in seconds) of the NJ101 CPU in a Structured Text  math equation.  You might also call it the Task Period... However it's called, It needs to be the amount of time that has elapsed from the last calculation of the ST math equation.  It must be a variable that also satisfies this looping equation: Time:= Time +cycle time .. so that the master equation, which is calculating position information, based on TIME .. is up to date with each calculation in the loop. How do I insert that cycle-time, which might not be identical for each loop, (or, is it) ?  Thanks, Regards, Michael  
  16. In my application the LMC automation controller will be calculating date-based lot codes. I would like to synchronise the internal clock with a time server such as pool.ntp.org. I can't find any info in the Schneider-Electric SoMachine help files or on the web. Does anyone know if this is possible?
  17. Hi,  i want to read real time and date in simulation mode. How can i do this in Unity pro? Thanks for helping
  18. Time Based Interrupt

    Hello guys!!! My system constist of: CPU: Q03UDE Some I/O modules Some Intelligent Modules (Q68ADI,QJ71PB92V...) A High Speed Digital Input card QX80H (setting responce time 0.1msec) 1 digital input from QX80H occupied to count the pulse that a flow meter sends. The pulse corresponds to the totalizer of the Flow meter (FCI ST100 series Thermal Mass) and it has fixed width 0.5msec. The flow meter sends 4 pulses / minutes approximately according to current flow rate. My Main Program has scan time 2.4msec. I think that PLC ignores some pulses because of the pulse width is lower than scan time of my program. Is it right? So, the PlC program calculates wrong total flow.... What can I do to avoid this issue? Attached you can find a sketch what I mean... I though to program a time based interrupt every 0.3msec. Is it right and possible in Q03UDE CPU.....? If yes, how can to do it? Thanks a lot in advance for your any help!!!
  19. Hi everyone, I would like to create a PLC code using RSlogix 5000 program in order to measure time delays on the network. Can anyone help me to do this? Thanks.
  20. Hi! I just started with PLC programming. I am trying to get the time between a output signal and a input signal. The problem is that the time is ~200 ms but when i measure it with this code:   TONR(Timer1); IF PosFeedback <= PosFeedback_Min & not Timer1.Reset THEN Timer1.TimerEnable := 0; FullCloseDeltaTime[1] := Timer1.ACC; Timer1.Reset := 1; END_IF; IF (move & not Move_LastScan) THEN //Start timer Timer1.TimerEnable := 1; Timer1.Reset := 0; END_IF; Move_LastScan := move; i only get even values in intervalls of 50 ms like 150, 200 and 250 ms. I have changed the real time sample rate to 11 ms so i don't understand why i don't get a more exact result. And i can see in my trend that the time isn't exactly 150, 200 or 250 each time. I i tried and time my own click on a button and i see the problem is the timer, i only get values in an interval of 50 ms. Is there a way to make the timer more exact?
  21. Micro 830 RTC programming

    Hi all,  Can someone please help me, I am using a Micro830 Controller running connected components workbench software to program the controller. I want the use the Real Time Clock of the controller to control an output to turn on everyday at 01:30am and turn of when it receives a signal from an input. The output will control a backwash valve that will operate and activate a cam switch internally that sends a signal back to the Controller to say the valve has operated and can now stop sending the signal to the valve. (if that makes sense). I have tried playing around with the RTC instructions but I cannot seem to get it to operate how I want it to. Any help would be much appreciated. EnvrioService
  22. Hey guys,   I know this is a topic that has been discussed before, but I am having trouble finding exactly what I am looking for.. I want to know the most efficient way to record data from my PLC to an Excel file on my PC. I want this to be done without the use of the PLC's webserver.  Specifically I am trying to record vfd speed every 10seconds with a time and date stamp. How can I do this?   Thanks, James  
  23. Hello all, I was asked to check if there is a PID real - time software which automatically calculates PID loops parameters and update the PLC registers or HMI ( by OPC server etc.) when the process is working and "breathing". REAL-TIME. Not PID simulator or PID tuner based on measured data, but a software that will calculate and update the PID parameters in real time while maintaning several PID loops simultaneously. Are there any suggestions? Thank you, Olesia
  24. ML1500 RTC

      Dear, I need some help with an application in ml1500 with the RTC . I need an exit is enabled by days of the week . I´m programming in Rslogix500. Program follows the image. If possible help me. Thanks Daniel.
  25. Good day, I´m helping with small project and currently i am stuck because of this problem. And I hope you can help me out. I´m using PowerFlex 525 connected with AB CompactLogix 1769-33ER PLC via EtherNet/IP. Connection is working, I can read and write values from/to 525. To configure both devices i´m using RSLogix 5000. 1) First problem occurs after I loaded configuration to 525 and it´s, that 525 keeps overwriting values of Accel and Decel Time 1. It happens when i directly change parameters in Module Properties (online) or after I upload configuration to device. It happens even if i set parameters directly to 525 with its HMI panel. - I kinda get around this problem when i use Accel/Decel Time 2 for Step logic, but if i send direct reference value motor still jump to it and that is not good, especially when changing direction of rotation. 2) Second problem is that I cant get Speed Sources and Start References right. Usually Is working only option 1 and others are not, or they are doing something else that they should. For better imagination this is what i want to do: I have 3-state switch (left = 1 ON(DigIn TrmBlk 02), 2 OFF; center = 1 OFF, 2 OFF; right = 1 OFF, 2 ON(DigIn TrmBlk 03)), In center position I want to control 525 with EtherNet (already working when: Start 1 AND Speed 1 = EtherNet/IP). In left position I want to control motor directly with Drive Pot and In left position a want to start Step Logic (which i have already set) - Funny thing, If I set Start 1 = Ethernet, Speed 1 = Step, Start 2,3 = DigIn, Speed 2,3 = Drive Pot then in all three position motor goes in Step logic.. Or when i get left and right position working then Ethernet is blocked.. and this kind of things.. I Attach print-screen of my current settings, if you need something more just, tell me. Thank you for your time, and I hope someone will be able to help me.