Search the Community

Showing results for tags 'the hmi server in area rna://$local/spring_insertion refused to load its project. the hmi server is not licened and cannot open a project with more than 5 displays'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 89 results

  1. Hello everyone! I am new to Eplan, and I am working on a big project on which someone else has worked on before me and almost finished it, but with a lot of technical mistakes and missing peaces. My boss expects me to fix a lot of things, but I have no experience with this software, so I could use some help. The problem is that no revision information (revision date, description, approved by etc) is displayed in this project, and I don't know how to make it appear, and be correct. I have made changes in plot frame and added special texts which should display these data, but I don't know where should I define wanted information (for example, I put special text for "approved by" but I can't seem to find adequate place to write the name of that person)? And, is there a way for Eplan to generate automatically revision description, based on the changes I made? From all said, it is obvious that I have no idea at all how revisions work, so any help would be enormously appreciated Thank you in advance! Cheers

  2. ab

    sharad4U posted a topic in Allen Bradley / Rockwell Automation

    The HMI server in area 'RNA://$Local/Spring_Insertion' refused to load it's project. The HMI server is not licened and cannot open a project with more than 5 displays
  3. Hi there! I have a question with AB PLC. My problem:  I have some raw data...distance for example.When the machine starts,the sensor begins to send the information with the distance values. When data is received it is moved into an array. After the first 5 values the program calculates an average and the result is moved into another array.Currently after receiving the fifth value,thus filling the first array,making the calculation and sending the average to the other array,the program empties the entire first array instead of just always discarding the oldest value of the five,and recalculating the average with the newly arrived value every time. I tried to made this with ladder diagram using an an fifo load and unload but isnt working. Please help me if anybody can. Thank You.
  4. Hello All,   I am would like to know how to send a bit from an excel file to an omron PLC through CX-server in order to confirm that I have communication and the excel file is open.   At the moment I am reading data from the PLC on the Excel file no problem but I don't know how to do it on the other way.   I am attaching the code I have written and the excel file. So the idea is having a cell with a 1 and reading this value as a bit ON on the PLC.   Thank you very much in advance I really  appreciate it. :)    
  5. Hello All,   I am having some issues with Excel while communicating with the Omron PLC. The Excel file is getting the data from the PLC and the macro doing what I want to do, but I am getting the following error messages when opening the excel file.   I am attaching the pictures of the messages and the code where debug send me.   Thank you very much in advance

  6. Version 2.0.2

    809 downloads

    free HMI/SCADA program WebN Server 2.0 (freeware) * manual & program download site : http://www.netran.co.kr * Web-N Server 2.0 (freeware) - PLC interface demo video : https://youtu.be/MuOFMwK7Qqs* Android phone app download : https://play.google.com/store/apps/deta ... .en2&hl=en- Windows 7/8/8.1/10 x64, .NET frameworks 4.6 over  - Mult-Language (tool language, view page language)  - PC monitor, Web browser monitor, Smartphone monitor - (Design once and monitor on multiple instruments)   Unlimited number of tags    Unlimited monitoring time    1,024 concurrent connections    Unlimited upgrade    Unlimited connection of       equipment (PLC, DCS, DDC ..)    Unlimited app push message   No Software fee    No installation cost    No registration fee    No license fee    No cost to use    No upgrade cost    Free Redistributable      
  7. free HMI/SCADA program Web-N Server2.0 (freeware) View File Program download site : http://www.netran.co.kr   Web-N Server 2.0 - video for PLC interface demo : https://youtu.be/MuOFMwK7Qqs   - Windows 7/8/8.1/10 x64, .NET frameworks 4.⁠6 over - Mult-Language (tool language, view page language) - PC monitor, Web browser monitor, Smartphone monitor   (Design once and monitor on multiple instruments)   Unlimited number of tags Unlimited monitoring time 1,024 concurrent connections Unlimited upgrade Unlimited connection of equipment (PLC, DCS, DDC ..) Unlimited app push message   No Software fee No installation cost No registration fee No license fee No cost to use No upgrade cost Free Redistributable =============================================== Submitter webn Submitted 08/29/17 Category Free Utilities
  8. I am currently using a Kinetex 5500 Servo Drive with a VPL Motor and its has vertical load attached to it. My problem is even after setting my Brake Enagaged time to 0.01s it drops like a dime. I had made sure that I kept my Servo STO enable for 5 second before MSO is shutoff and MSF is engaged. Any ideas on what I am doing wrong? Attached is an action parameter settings for brake control.
  9. Hi All,  I was wondering if any of you guys could help me about improving my load sharing application. At the moment it's very unstable and i can't see what i am doing wrong! Thanks.  Details: I am trying to run a industrial chain conveyor using Torque control by Real sensorless vector control function of A700 Mitsubishi VFD. I have been following "Technical Note" which is provided by mitsubishi (see attached PDF).  As described on technical note, i am trying to control 5 motors ( 1 X 2.2kW, 4 X 1.1kW) to share the load on this chain conveyor. Torque command (SV) and Motor Torque (PV) read from Master VFD and PID output (MV) of Q03UDE transferred to Slave VFDs over CC-link. i would appreciate any information and help you can provide, Many Thanks.  Application_Technical_Note_Load_Sharing.pdf
  10. I have been tasked with pointing our FT View application to a remote SQL server for all data logging.  I'm having some issues getting this to happen.  I've configured everything I can find in our test environment, but FT View still points to the local SQL Server instance.  There must be a setting I'm missing.   For instance, when i go to Tools -> Diagnostics Setup -> Destination Setup -> ODBC Database, and I point to the system DSN I've created pointing to the remote server (and even enter the correct remote credentials), when i create a table, it goes to the local sql server instance... I've restarted multiple times.   Any direction would be appreciated.

  11. TIA PORTAL connect with Mitsubishi FX3U

    Vito_Manager posted a topic in Mitsubishi

    In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  

  12. Visu+ SCADA Query timeout exceeded on SQL Server 2014

    Bruna Pozzato Tavares posted a topic in Other PLCs

    I have an application in the Visu+ Scada System, from Phoenix Contact, which makes a query in the SQL Server 2014 database. While the database was empty, queries were made perfectly, after 4 months the database grew up absurdly and then stopped running the query, returning the following error: Query timeout exceeded. I have a general table with 210 variables being written every 20 seconds. The query is made by updating the parameters in another single row table, it generates a trigger that copies the requested query to a third table and it is plotted on a chart in the supervisory system. The error occurs when Visu+ sends the parameters to be updated in the second table, returning "Query timeout exceeded.". However, when I update directly through SQL Server, it updates, generates the trigger and performs the requested query. Could someone help me solve this timeout problem, please? Thank you very much in advance!!

  13. Step7 on remote server

    ErikSN posted a topic in Siemens

    Hi, I was wondering if anyone have experience with Tia Portal Step7 v.14 and Step7 Classic v.5.5 located on a remote server? We have several persons working on our PLC's. As it is they all have their own PC with Step7 + licenses. We were thinking about moving the software environment onto a server to reduce license and maintenance costs. Does anyone else have this setup? If yes do you have any tips or comments? Pros/cons? I already know now that you cannot autodetect/configure new devices from a remote server as the Step7 detection protocol doesn't work through a router. We can live with that. We need both TIA Portal and the Step7 Classic on the same server. Thanks

  14. GE IFIX Server Client connectiom

    Eby posted a topic in GE

    I want to make a setup of one Ifix 5.5 server and  one Ifix  5.5 client for testing purpose.  This is for doing some alarms and events testing at the client( Operator Workstation) end. My question is that is it possible to do this setup without a valid license. Is it possible to establish the connection between server and client without license..? Regards Eby
  15. Hello We have a HP ProBook 650 G1 with Windows 7 Professional 64-bit and when im trying to install Sysmax Studio 1.14 it all goes well untill I get to the CX-Server part. The installation always stops there and I dont get any usefull information from the event viewer. Myabe, just maybe, it might have to do with Bluetooth, a couple of times I get an event about the process "devmonsrv.exe" and how it failed to start. But this event doesnt always appear so it might just be an coincident. The installtions halts when he does something with the "OmronZipItWnd.exe" file. Have anyone of you have had problems with installating CX-server on a HP machine running Win7?   Regards Niklas
  16. I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.  

  17. SIEMENS S7 STATION

    kralcccyu posted a topic in Siemens

    Dear All, I am very new to S7 PLC programming (S7 Simatic Manager v5.5) and I wanted to know how to back-up a system consisting of multiple PLC Stations (S7-1200, S7-300, etc). I am able to upload station to PG but that will save only per station. How about saving the whole system? I am not sure if i am using the right terminology. As you can see, I was given a zip file for the S7 project and it contains the whole system. I am trying to see how the commissioning engineer was able to do it (don't ask why I am not asking him instead). How can I then use this project file to download the program to the PLC/system once I decide to restore. I am at loss and have been searching for references over the internet. Uploading and downloading per station is no problem. I cannot seem to know how to do it on multiple stations system. I hope I have made some clear question or somehow you have managed to understand it.  TIA.
  18. So here's the problem I'm facing. I've recently started working for a company that has two facilities. They have lots of old equipment/PLCs, plus some new stuff. We undertook a project to upgrade the network infrastructure, and replace all the old programming terminals (Some had Windows 2000!) with a new standardized programming terminal, all sharing a common image. We've installed these new computers, and they were working great. Recently, we switched all the licensing to a Hyper-V based server, using FactoryTalk Activation Manager. Right off the hop, there was issues with one of the sites (let's call it site B). Site A is working fine. When you open FactoryTalk Activation manager, it populates the activations from the server in about 1s. The wait times for opening software are pretty normal (For RSLogix 5000, "normal" isn't exactly rapid, but like I said, that's normal). For Site B, the activations take forever to refresh in Activation Manager when opened on a programming terminal. The software takes even longer to open (we're talking about 2-3 minutes). Network wise, Site B is further along than Site A. We've implemented a Stratix layer 3 switch at the top of the network and use area specific VLANs to reduce multicast noise across the network (much of the multicast noise comes from vendor equipment, not PLCs, so I can't control it). This works fine. I can remote in and use TeamViewer/VNC with acceptable performance across the network, so it's not being bogged down to unacceptable levels. However, connection to the activation server is unacceptable. I'm not sure of the culprit (yet). We are continuing network improvements, removing some older 10/100 links and installing Gigabit equipment between the Hyper-V server and the above mentioned Stratix, hopefully that might help. However, that same 10/100 link is the one I use to remote in and use Teamviewer currently, so I can't see how much improvement it will give us for activations (which really should take almost no network traffic). To get activations, I'm just adding the IP address of the Activation Server into FTActivation Manager on the programming terminals. Any ideas, people? Thanks

  19. communication k3hb-v vs plc cp1h

    dinnguyen posted a topic in CX-Programmer

    I want communication rs485 present the first-weight  2 K3HB- V with 1  PLC CP1H. you can send your program or piece of his guidance. I had finished hardware and wiring installed, i very bad speak English so you sympathize. thank you,mail dnbella1206@gmail.com  

  20. communication k3hb-v vs plc cp1h

    dinnguyen posted a topic in CX-Programmer

    I want communication rs485 present the first-weight  2 K3HB plc v with 1 CP1H. you can send your program or piece of his guidance. I had finished hardware and wiring installed, i very bad speak English so you sympathize. thank you,mail dnbella1206@gmail.com  
  21. I am having trouble loading the configuration into a Micro984-230. I lost an old M84-002 PLC. I have the program. I purchased a Micro994-230 replacement. I lost my cable, so I made a new one. The only software that I have still running is Updoc 4.30b. I tested out my cable and Updoc by connecting to a 984-381. Everything worked fine online and offline. The error I get during the configuration loading is communication error 13. I have no idea what that is. Perhaps I can't do configuration loading with Updoc. I have Modsoft Lite  working but I do not think that it works with this controller. It is for MIcro and Compact controllers. I may have modsoft and taylor kicking around but I do not know if they are installable or not. I hope I can find out if my config is improper, I have used the wrong controller setup file (used Micro984), or where iI can have the config loaded for me? I also do not know if this used controller is functioning correctly.

  22. Version 1.0.0

    102 downloads

    This video about simatic manager s7 300 siemens plc in Hindi/Urdu
  23. Create new project in Simatic Manager View File This video about simatic manager s7 300 siemens plc in Hindi/Urdu Submitter faisal rasool Submitted 04/08/16 Category Manuals, Tutorials
  24. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software

  25. Version 1.0.0

    1 download

    The Smart Server is a versatile smart energy manager that connects control devices to IP-based applications such as enterprise energy management, demand response programs, street light management systems, and high-value remote asset management programs. Features - Supports all Lon work Devices’ or any other device which uses Smart-Server by Echelon with SOAP calls as a master/client. Specify model #s, mem types - High-speed communication - Routing capability (i.e. can be used in the WAN) - Package-oriented data transfer  - Performance – 2.2Ghz Intel - 10 words: 15msecs - 100 words: 35msecs (avg)    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here