Search the Community

Showing results for tags 'sysmac studio uploading'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 100 results

  1. Hi, This is going to be a long question, but I want to be thorough so please bear with me. We have a system consisting of ABB equipment for motion control and IO handling. In order to simplify the overall architecture, we want to replace the motion control part of this system (which at present consists of a bunch of different CPU cards and PCBs) with one Omron NJ controller an use its SW library for motion control instead. With regards to IO handling we want to leave the IOs as they are now and just map them from the ABB PLC to the NJ controller and back using an Anybus X-gateway (i.e. the ABB PLC will collect the IOs from its modules, send them via Profinet to the Anybus, which will map them on EtherCAT to the NJ controller). Now, in the NJ controller, rather than putting all the IOs in the global variable list, I want to create structures (one Digital Input structure consisting of booleans, one Analog Input structure consisting of long reals and so on). The reason I want to use a structure rather than an array, is that the structure let's me specify variable names, which is nice. Here is my problem: How can I map the digital inputs from the Anybus to the Digital Input structure? The data from the Anybus is packed into bytes of data, so I want to find the most convenient way to take these bytes from my IO-table, split them up and map them to the bools of my structure. I can't seem to find good solutions to this problem online. From the Omron Instruction docs W502, the function AryByteTo seems to do exactly what I want, but it seems like my output variable in that case needs to be an array instead of a struct. If I don't find a good solution to this I am stuck with just hard coding every DI to its variable in my struct, which is time consuming to say the least considering well over thousand IOs. Hope someone will help. Thanks in advance.
  2. NX-EIC202 Utility

    Version 1.15

    62 downloads

    A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000.
  3. I am experiencing a serious problem. Everything went fine in my project for month. Yesterday when I "Transfer to Controller" (like I use to do several time a day) I got this Message : "Build is not complete. Process was aborted". So I build again, I Rebuild controler, I restart SysmacStudio, restart the computer, reset the hardware on the project ... nothing worked. Always the same message. So I opened a previous version of my code. Since it was allready built when saved, I had no problem transfering it in the controler. However, the moment I change a line (have to rebuild) on this backed up version... same problem appear. I finally got to the "output windows" (Alt+3) where I saw ALL build are failed. I've contacted my Omron representative and he is trying to help but he seem as lost as I am. Please help if you can, I am using Sysmac Studio 1.13 on Windows 10. I also have a HMI wired to the project and everything work fine with it.  
  4. Hello guys, I sell cheaply Omron SYSMAC Programmable Controller - CJ1M-CPU12, CJ1W-PA202, CJ1W-ID232, CJ1W-ID211, CJ1W-OD232, CJ1W-AD081-V1, CJ1W-NC113, CJ1W-TER01, + cables: CS1W-CIF31 and CS1W-CN626 - Actual price is 290$ - more info+photos - > here < details: CPU:  CJ1M-CPU12 (ver 3.0) Small! Fast! Flexible! These machine controllers provide flexible control for all kinds of applications.  Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations.     PSU: CJ1W-PA202 Used to provide power to CJ1M CPUs and I/O units; AC and DC supply versions available; Clips to the left of the CPU; Also used to power expansion I/O assembly Note: The output currents stated are maximum figures. The combined 5Vdc and 24Vdc outputs must not exceed the maximum output power.   Basic I/O Units: CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) A wide range of CJ series input units are available featuring high-speed input and suitability for various applications.   CJ1W-OD232 A Wide Range of Basic Output. Units for High Speed Output and Different Applications. These Output Units receive the results of output instructions from the CPU Unit and perform ON/OFF control for external devices.   Special I/O Units: CJ1W-NC113 Axis position control unit. Open-collector output. Point-to-point positioning controller withpulse train output.   CJ1W-AD081-V1(SL) Analog Input Module to convert varying input signals     OTHERS: CJ1W-TER01 End Cover CJ1W-TER01 (necessary to be mounted at the right end of CPU Rack)     Cables:   CS1W-CIF31 ↓ (length - 0,5m; used)   CS1W-CN626 ↓ (length - 6m; used)         Current status of each part: About a year used in a clean environment. Our creation of PLC Programmes have been deleted - PLC is ready for your creation. All parts have been tested and are fully functional. Personally, I guarantee the operation of all components. A part of this purchase is a PLC / USB cable (CS1W-CIF31; CS1W-CN626), allowing you yourself will be able to check the status of functionality. A part of the sale is not subject documentation neither software. (CX-Programmer can be obtain from the Internet.) Sale due to dissolution of company.               Product Description OMRON + Web links to specifications   CJ1M-CPU12 (ver 3.0) Compact 90 × 65 mm (H × D) dimensions are first class in the industry. Provides excellent high-speed control performance, with high-speed processing of 0.1 μs for LD instructions and 13.3 μs for floating-point calculations. Other models are available with special functions such as the CJ1M-CPU2[], which provides positioning functions and built-in I/O, and the CJ1G-CPU4[]P. High-capacity Memory Cards up to 128 MB can be installed, and used to backup the program and system settings, or log customer data. The large instruction set can support diverse applications. Four types of programming are supported (ladder, structured text, sequential function charts, and instruction lists), with approximately 400 instructions and 800 instruction variations. These CJ-series CPU Units support structured programming using function blocks, which can improve the customer's program development resources. The various protection functions provide improved security to protect valuable software resources and property. The CPU Units are compatible with the CX-One Integrated Tool Package. Information for each component can be linked, and the system's data can be integrated into one database. The software can provide total support from PLC settings to network startup.   Specification: > here < Datasheet: > here <     CJ1W-PA202 Omron CJ1M CPU's, PSU's and Expansion Control/Interface Modules The CJ1M is a powerful and compact PLC family, covering applications requiring up to 640 I/O. CPU models are available with built in pulse outputs for stepper or servo control, and all CPUs in the CJ1M family enjoy optional modules for many types of I/O and communications. The CJ1M is the next generation of PLC from the earlier CQM1 series, and program compatibility eases migration between them.As with other Omron PLCs, the CJ1M series is programmed with CX-Programmer (RS stock no. 400-6440), designed for compliance with IEC61131-3. The backplane-less construction of the CJ1M series makes selection and installation simple; choose the CPU and power supply unit, then the I/O modules to suit the application. These items are simply plugged together end to end and then mounted on DIN rail.   Specification:  > here <   CJ1W-ID232 CJ1W-ID211(SL) (ID211 without terminal block) High-speed input models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 90μs Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs. The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise. Either a Fujitsu or MIL connector interface can be used. *2 Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices. Specification:  > here <   CJ1W-OD232 High-speed output models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 80μs Output Units are available with any of three output types: relay contact outputs, triac outputs, or transistor outputs. For transistor outputs, select from sinking outputs or sourcing outputs. Output Units with load short-circuit protection are also available. *1 Select the best interface for each application: Fujitsu connectors or MIL connectors. A wide variety of Connector-Terminal Block Conversion Units are available to allow you to easily wire external output devices. Unit have load short-circuit protection.   Specification: > here <   CJ1W-AD081-V1(SL) • Wire burnout detection • Peak-hold function • Mean function • Offset gain setting Use the Analog Input Module to convert varying input signals, such as 1 to 5 V or 4 to 20 mA, to binary values between 0000 and 1F40 Hex and store the results in the allocated memory at each cycle. The ladder diagram can be used to transfer the data to the DM Area, or the SCALING instructions can be used to scale the data to the desired range.   Note: Analog Input Terminals are also available as DeviceNet Slaves and as Multiple I/O Terminals. You will find further information on these in the Industrial Networking and   Specification: > here <   CJ1W-NC113 These position control units support positioning control via pulse-train outputs. Positioning is performed using trapezoid al orS-curve acceleration and deceleration. Models are available with 1, 2, or 4 axes control, and can be used in combination withservo drives or stepping motors what accept pulse-train control.   Specification: > here <         Payment Method 1.     I accept PayPal only. We ship within 3 business days of receiving payment. 2.     Serious bidders only, please. Orders will be cancelled and an unpaid item dispute filed if payment is not received within 16 days of purchase. Therefore, please make sure it is you need before buy the product.   Shipping 1.     Free Shipping 2.     Method : EMS or FedEx. 3.     Winning Bidder can receive the item in 2 days or 1 week from receipt of payment.  
  5. How do I edit an array size ARRAY[0..13] OF REAL to ARRAY[0..15] OF REAL? Sysmac Studio doesn't allow it to be done online, as far as I can see. If I do it offline and then go online and Synchronise, Transfer to Controller I receive error Any ideas?
  6. Hi all, I need to edit the hardware configuration of an existing system on B&R 2005 system. but when I upload program from plc to my computer and trying to open it on Automation Studio so Software is not recognizing this uploaded file from PLC. Actually Digital Mix module is malfunctioning in existing system, and this module is out of stock. What I want to replace it with one Digital Input and one Digital Output Module which is available. Please help me Thanks & Regards    
  7. Programmatic Timer/Delay

    Howdy, Wasn't sure the best place to post this Programmatic Timer/Delay question. I need to create a Timer whose 'time' will change programmatically. I am having trouble coding this in RSLogix/Studio 5000. I need to delay a little more every time 1 Product passes through up to a certain count then reset and start over. Basically during a conveyor transition, via a pop=up conveyor, I don't want the product in the same place every time. I want each successive product to be in a little bit different spot, call it the Conveyor Land Point. The product will land a little further each product, then start back at the first land point I have no code to share as all attempts were FAILs Inputs: > Product Count (Count up or down counter) > Product Count Cycle (Number, constant, set able, currently = 4) > Delay Time Sequence Interval (Number, constant, set able, currently = 0.25 seconds) Outputs: A sequencing delay, based on Product Count > Delay Sequence:  1st delay 1 second. 2nd delay 2 seconds, ... up to Product Count Cycle (4) then reset back to 1. Program: (As I was thinking) Set Product Count Cycle, Product Count Cycle = 4 (May change could be 3,4,5, or 6) (Might be hard code, might be an HMI input) Set Delay Time Sequence = 0.25 seconds (May change could be 0.5, 0.75, 1.0 etc.) (Might be hard code, might be an HMI input) Line start, Product Count at one (1) Calculate Delay     Delay   = Delay Time Sequence Interval * Product Count Cycle * Product Count  Product Count increments via PE Repeat e.g. Hopefully I have not 'run' at the mouth, wanted to give as much info upfront                I included a picture Any thoughts, help would be great. thanks,
  8. I am working on re writing a PLC program from CX Programmer to Sysmac Studion and i have run into a few issues of not being able to find the same instructions. Does anyone know of an instruction in Sysmac Studio that is the same as a XFER and a BSET in CX Programmer.
  9. Hello Everyone, haven't roamed here for a while.   So I'm having a little trouble using the Structure Data Type in Sysmac Studio/NJ. As an independent tool, it is powerful to create user data types, such as Ethernet/IP Tag Link to V680S RFID or any other EIP equipments. And it is way more powerful than the CJ2, since it has the ability for user defined offset, which CJ2 can't do.   But the problem is we cannot move/copy the content of the members to any other standard types. For example, I have a structure with 8 BYTE type members. Then I need to send those out via UDP or TCP/IP comms, which Function Block requires BYTE[] data type. Unfortunately data movement instructions such as MemCopy and AryMove didn't work at all to do the job. This was easily done in CJ2 since we can access each memory content directly. Currently I already resort to use customized Functions which will translates the Structure into BYTE[], but that would mean for every different protocols, I need to create a different Function.   I have seen this problem posted somewhere in the SS/NJ Improvement Request section, so I wonder has anyone know any update about this matter? Haven't checked the latest update yet (SS v1.14), but I'm certain that in SS v1.13 this feature is still unavailable.   Thanks!!!
  10. Using a Panelview Plus 7 HMI with FT view Studio. Is it possible to enable/disable a button? I can't  find anyting on the button 'Animations' menu or anywhere else.   Thanks.
  11. Studio 5000 toolbar

    Hey everyone, I am having trouble with Studio 5000, i have just finished installing the software and my toolbar is all messed up (see attachment). can anyone help me with this? really appreciate all the help.    Thank you,  
  12. Union

    Hello! I am trying to get hold of the bits in a word, i have read that union is the way to go. My problem is that i cant figure out how union works. I have made a union between a word (16bit) and an array(0...15). The way I understood this was that the word now automaticly updates the array so that when the least significant bit in the word should update array[00] and so on. This is not happening. When I monitor the variables I can see the word change, but nothing happens with the array. Have I misunderstood the consept and what should I do to get hold of the bits?
  13. I hope I am posting this in the right location, I did not see any sub forums specific to Rockwell or Factorytalk. We are finally converting from XP to Windows 7! WOO-Hoo! It has gone fairly well but I see one issue that has me concerned and I would like to resolve it now; my application converted fine except my translations did not come across. We have two base applications we build off of that correspond to the type of machine they are used for; both support multiple languages which are selectable with an on screen VBA based button that does a bit and language change in the background. One application supports English and Russian while the other is English and Spanish. I have tried doing the import on Windows 7 in both languages related to the application I am working with and the alternate language (in this case it is Russian) never comes across. I have tried both the direct copy and .apa methods with the conversion and the results are the same. Is there a step I am missing during the conversion process or will I have to export my languages from 6.0 and import them to 8.0 separately after conversion? I am not thrilled about this process as it never seems to keep the proper layout of the text when imported. I assume the issue is the conversion process as I can load the .apa on a fresh XP build and the languages are both present.
  14. Add On Instructions Parameters

    I am trying to learn how to use add-on instructions, and to get a better understanding I am trying to do a simplified example. I am trying to make two separate add on instructions that alter an integer tag in different ways. I would like one AOI that multiplies the input integer by 3 and another AOI that adds 3. The integer tag is a InOut parameter.  I named these AOIs "Mult3" and "Add3". When trying to use the AOI's it requires me to have an additional input with datatype the same as the AOI ("Mult3" or "Add3"). I have a couple of questions about this: 1. Why is this data type required? It seems to me that I would only need the InOut integer that I want to modify. 2. I want to use these AOI's in a number of places throughout my code on a number of tags. Would I be able to just use one "Mult3" tag for all the AOI's, or would I need a seperate tag for each use of the AOI?  For Instance if I am using the Mult3 AOI in 3 separate places in my code, two times using "Int1" as the InOut parameter and another time using "Int2" as the InOut parameter, could I just make one tag of "Mult3" datatype and use that for all the instances of the AOI, or would that screw it up in some way. Thanks for any help.
  15. OS: Windows 7 on VMware virtual machine. Sysmac Studio V 1.13. What works: Ping to PLC. Sysmac Studio -> Controller -> Controller Communications -> Ethernet via hub -> Test -> "OK". What doesn't work: Starting with new project for NX701-1600 (correct PLC): Sysmac Studio -> Controller -> Online. -> Controller -> Transfer ... -> From Controller. The task seems to run to about 90% before stopping with the error:  I can't find any reference to this error in the manuals. Has anyone got any suggestions to fix this?   Many thanks.
  16. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  17. Hi guys, I'm using NJ501-1320 for the first time, but i'm having a hard time trying to get the information read from another PLC connected to the switch. I have successfully established the connection to the database, and write some values to it. The main problem now is sending the values in memory, to that same database. So i'm reading the values using an array [0..9] of word, and then converting the same variable to string. The instruction receive doesn't have no reference in the manual, so i don't know if the problem is there. Any help would be aprecciated. Thanks
  18. 1756-HSC vs 1771-VHSC

    We have just replaced a PLC-5, RS Logix 5 PLC with Control Logix I'm having encoder count issues with the new HSC, I have it configured and wired similar the old 1771-VHSC However, now my encoders only count up or down NOT BOTH?? I have the channel on the HSC set for Encoder 4X, with a preset and a roll over. ANY IDEAS? THANKS !!
  19. Hello! I am programming with FT view studio version 8. In the program, when I make numeric display, I can not input values for this tag I am using in the display. Then I decided to make 'invisible button' for enabling the input for this tag which is shown in the numeric display. This is okey for me, only if there is other ways to do this please tell me. Now when I have created this numeric display with input enabling -'group', I have a problem, how can I use security levels for this group, so that only logging in values can be set? I have found that there is security code selection for this in the screen displays, but not for the buttons.
  20. Hello! So I have this issue with me by this week. I have an NJ with unit version 1.00. I had not did any download/upload on this unit. Due to the need of showing using Password capability on Function Blocks, I need to upgrade the unit firmware version, so I changed it to 1.10. After that I tried to program a simple two Sections program. I left the CPU for a week, then when I get back to it, I upload the program from the CPU. And the upload was SUCCESSFUL! No errors are shown. However all of the Rungs inside each Sections contains nothing. Even though the two Sections that I made before are still present. The program itself is still working though. If I open the previously saved project, going online and do variable controlling, I'm still able to do so. Has anybody experienced this before? Any suggestions / solutions? Thank you...
  21. Omron releases new 'SUPER-PLC' http://www.omron.com/media/press/2015/04/i0401.html
  22. Omron Releases a new entry level NJ Sysmac CPU. This new controller targets application up to 0 or 2 EtherCAT Axis. http://www.omron.com/media/press/2015/04/i0401.html
  23. I successfully read the input and output of OMRON PLC CPM2A with Indusoft web studio (IWS) by using OMPLC driver. I have select OMPLC driver (Serial Com). Then configure a driver worksheet. The driver worksheet is the place that PLC tags are associated to InduSoft tags. I successfully read the I/O but I failed to write the I/O of PLC by using IWS. Can you help me? It is difficult to find OMPLC Standard Driver Sheet (SDS) for control relay output block (CROB) and Analogue output block (AOB). The attached diagram shows My Standard Driver Sheet (SDS) setup. Thank you for your kind cooperation. Zack Malaysia
  24. Omron IA221 input cards

    Hi all, I recently got an old rima rs-12 counter stacker working. It was out in the plant working flawlessly until apparently the wires going into the power supply magically ripped themselves out. The operated hooked the wires up again but mixed them up(both black). When he powered up it instantly tripped a breaker inside the machine. He switched them and turned it back on to find that the flippers and pusher no longer work. The two omron IA221 input cards that control the flippers and pusher no longer have lights on them and I have found multiple open and short capacitors on the cards. The cards are 110VAC and I'm thinking the reversed polarity shouldn't have affected the cards, perhaps there is a greater problem I need to resolve before repairing and installing the cards. Could this have damaged the PLC itself? Any information will be greatly appreciated. I know it isn't really a PLC problem(or maybe it is.)
  25. Is it possible to run the NJ simulator in Sysmac Studio and have it communicate with a real NA HMI? Thanks.