Search the Community

Showing results for tags 'serial to ethernet conversion'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 329 results

  1. WeinTek to AB PLC Issues

    YoungNDumb posted a topic in HMI & SCADA

    I am connecting a WeinTek eMT3105P to a CompactLogix L2 series PLC via the WeinTek Rockwell PLC (CompactLogix) - Free Tags driver and I cannot for the life of me get the thing to connect. I have all my tags imported and have played around with all the settings in the manuals I can find. Any help/advice would be greatly appreciated. I know my IP addresses are correct and if I connect my cable directly from the HMI to the PLC I still get the "PLC no response" message 
  2. Hello.   I'm trying to communicate between two PLC's  using FINS function block _CPU011:ReceiveData.   PLC1: IP 192.168.1.50 (MASTER)   PLC2:IP 192.168.1.51 (SLAVE)   If I don't use »IP Address Table« everything works using NODE number &51.       The problem is that on the real project these two PLC's will be on different subnet.   For example:   PLC1: IP 192.168.1.50   PLC2: IP 192.168.2.50   So I will have to use »IP Address Table« to achieve communication between these two PLC's.   I tried to sett IP Address Table on MASTER: Node 1=192.168.2.50   But If I try to communicate I see that packet is sended to network but I've got error #1005.   Do I have to sett the SLAVE IP Address Table?   Hoe to do this?   What are the right settings for MASTER and SLAVE IP Address Table?     I'm attaching pictures of CARD settings.  I don't want to use CX-Integrator because I would like to make project to UPLOAD and forget.       Thanks.  
  3. ello.I am Melani. I working on to convert Siemes S5 code to Logix5000.Following is FB that need to convert.Segment 1Name :John0005 :C DB 2100006 :L FW 400007 :T DW 20008 :L DW 60009 :T DW 1000A M001 :L KB 0000B :O DW 1000C :T FW 0000D :L DW 1000E :L KB 2000F :+F0010 :T DW 10011 :L DW 80012 :<F0013 :JC =M0010014 :L DW 20015 :T FW 400016 :C DB 1500017 :L KB 00018 :T DW 10019 :T DW 2001A :T DW 3001B :***How to convert this code to Logix5000 either structure text or ladder logic?Thank you if anyone can help me to convert it.Thank you.Melani

  4. RS485 Async

    ndutrastocktn posted a topic in Computer Help and Networking

    Hey guys I don't have much experience in PLC serial communication and I'm tasked to integrate 6 OP-905 scales with our EATON based control system. The scales are rs485 asynchronous serial communication, my concern is that if the device is not designed to be an RTU then I cannot use modbus. And if that is the case how do I talk to multiple scales using the async protocol. Has anyone done this in a similar platform? 
  5. We recently obtained a new Vendor ID (VID) Number from ODVA, 1477 for the purposes of developing an EtherNet/IP scanner device.  When we try to use that number with the Allen-Bradley PLC & Studio 5000 Logix Designer, our data type REAL's are showing up in Studio 5000 as SINT's.  We have seen this mangling of data types before when using the Omron VID, 47 with the same Allen-Bradley PLC/EIP Scanner.  The data types are being misinterpreted, or mangled from REAL to SINT, e.g. the *.eds file defines 32 REALs for Input and 32 REALs for Output, but within Studio 5000 we see 128 SINTs each for Input and Output. It is as though the Allen-Bradley/Studio 5000 database does not have our Vendor ID.  When I change the *.eds file, Vendor ID Number from #1477 to #1 then we see the *.eds file being properly read and interpreted, e.g. 32 REALs for Input and Output show up as 32 REALs each.  Does anyone know what file we need to modify in Studio 5000 ???  We want to add our Vendor ID #1477 to that file. Hardware: EIP Scanner: Allen-Bradley Compact Logix L18ERM EIP Adapter: Delta Tau Power PMAC Motion Controller (EIP OpeNer Stack) Thanks in advance! See screenshots below. within Studio 5000, see screenshots
  6. Hello to all, I am new here, and I have a project with FX3U plc and CR 2DA 700 robot controller. Does anyone have some experience in establishing communication over FX 3U enet module and robot controller, I need to send and receive 5- 10 M registers and D integers. Thanks
  7. Hello everybody, I have network from : PC - 192.168.3.11 PLC - 192.168.3.250 I change this option in FX5U PLC in GX Works3 for Network Ethernet port --> Application Setting -> Security -Disable Direct connect with MELSOFT : Enable/disable -DO not respond CPU module search : Respond / not respond and I upload program to PLC. After upload program to PLC and restart it was impossible to connect again. I Have ping between PLC and PC, but could't write program. Always writes me Error <ES:0180840b> So to disable Security Option you should to do : 1. Open Works3 2. New Project (Choose your PLC - FX5U) 3. Online menu 4. Specify Destination Communication 5. Click twice in PLC module 6. Set Connect via hub (In my case i connect PC and PLC directly !) 7. Choose IP Address ( in my project : 192.168.3.250 , PC must be in same network 192.168.3.X) 8. Give OK 9. Connect Test. With steps I disable security options and it was enable to connect to PLC and Write data on it. I Hope that will help to other with same problem. Special thanks to : Piotr Tynor(Mitsubishi, Poland ) , Adam Syrek (Mitsubish, Poland ) , I. Ayvazova (Bulgaria) , K. Raykov (Bulgaria)
  8. Hello, I was hoping for some help in trying to read/write to a handful of bits in a CJ1M-CPU13 controller from a Compact GuardLogix. The CJ1M rack has a CJ1W-ETN21 card that is already communicating to a handful of Yaskawa drives. Is it possible for me to communicate with this controller from a CLX unit over ethernet? I don't believe an ETN21 card uses EIP but is there a way around this? Right now, I'm struggling to even find the IP address of the ETN21 card as the CX-Programmer file provided to me by the customer does not have the card in the IO configuration and I've never worked with Omron PLCs before. I found a CJ2M to CLX guide but it assumes communication over Ethernet IP and the ethernet port is native to the controller. Any help at all would be appreciated. Thanks!
  9. Grupa ProfAs Sp. z o. o. jest firmą doradczą, świadczącą usługi w szeroko rozumianej dziedzinie Human Resources. Specjalizujemy się w rekrutacjach na stanowiska specjalistyczne, średniego i wyższego szczebla. Wierzymy, że nasz Zespół złożony z profesjonalistów jest w stanie zapewnić perspektywiczne spojrzenie i najwyższą jakość wykonywanych usług. Aktualnie dla naszego Klienta - firmy z branży automatyki przemysłowej - poszukujemy osoby na stanowisko: Programista sterowników PLC Kraków / Piła / Poznań ZAKRES OBOWIĄZKÓW: Programowanie sterowników PLC Siemens Wykonywanie aplikacji dla systemów SCADA i HMI Dobór konfiguracji sprzętowych PLC Testowanie i uruchamianie maszyn u Klientów końcowych (delegacje krajowe i zagraniczne) Wykonywanie programistycznych prac serwisowych u obecnych Klientów Sporządzanie instrukcji obsługi maszyn   WYMAGANIA: Bardzo dobra znajomość sterowników PLC Siemens Umiejętność parametryzacji serwonapędów, falowników, etc. Znajomość paneli HMI oraz systemów SCADA Znajomość sprzętowa oraz programowa komunikacyjnych sieci przemysłowych ProfiBus, Profinet, Ethernet, DeviceNet, Modbus, etc. Znajomość zagadnień i komponentów automatyki (przetwornice, serwonapędy, obwody bezpieczeństwa, aparatura modułowa, itp) Mile widziana znajomość programowania innych sterowników: Allen-Bradley, Omron Prawo jazdy kat. B Komunikatywna znajomość języka angielskiego lub niemieckiego OFERUJEMY: Współpracę w oparciu o umowę o pracę Udział w profesjonalnych szkoleniach Korzystne warunki wynagrodzenia Rozwój w firmie z doświadczeniem na rynku międzynarodowym nr w rejestrze 14990 Osoby zainteresowane prosimy o przesyłanie CV na adres k.dominik@profas.com.pl lub kontakt telefoniczny pod nr tel. 881 700 778.
  10. Hello, I'm not sure if I should make some presentation first but as time is always short i'll just expose the doubt. Unfortunately because of a technician misunderstanding I ended resetting/erasing the PT software after a full memory error. The SW2 switch 1 was used and the system screen data program was erased instead of the program client data. So all the screens menus buttons etc were lost. Unfortunately there was no copy of the application but a similar machine was found were a different screen (NT21-ST121-E) was installed and by luck the programmer technician used the same file from the machine I'm dealing with. I suppose he might have done some modifications to make that machine able to deal with the same and different objects too. But the base menu screens seem exactly the same. In fact the screen buttons appear to be miss aligned as for a smaller screen, so for sure He used the same application. Now the problem is that the NT- Series Support Tool 4.82 only allow auto-conversion of the applications to a recent model. Example, if a make a NT20S application and change the PT type to NT21 it asks for conversion confirmation and all goes ok. (It will need to set Clock Address that I don't know which to chose). But this Is not what is the problem. Problem is that after uploading the application from the NT21 of the other machine to the NT Tool, I can't just download it to the NT20S PT. And if I go to the PT configuration menu it will only allow me to chose another higher model of hardware. Earlier hardware models won't even show in the list. Is there any tool I can use to convert back the NT21 application to the NT20S?   Regards.
  11. Hello, I need to make an ethernet communication Siemens S7-300 <> Omron G9SP. The HW of the Siemens that i us are CPU 315 2DP and CP 343-1 Lean. I did try to follow the Omron manuals Z922 and Z924, but faced with some problems. First of all in Z924 there is no complete HW configuration of Siemens (communication configuration is missing). Also, formats of messages differ in both manuals. Maybe there is an Simatic Step 7 project example, that i could open with Simatic Step 7 manager to do a deeper investigation, or maybe somebody has a lot more experience in this case? Thank you in advance.   WBR @rturas
  12. Hi everybody: I'm writing here because I have an Etherhet problem with my compactlogix 1769-L32E. I connect a crossover cable between my pC and the controller, then I run the BOOTDHCP server program . The BOOT DHCP window only shows the MAC of the PC, the controller´s MAC doesn't show even if i wait for more than 10 minutes I hope you can´t hel  
  13. Hello,             I need to communicate Power meters ( GE Multilin EPM 5500P) to  GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the  Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance  mnetman-a3.pdf multinet (1).pdf PM-GE.pdf
  14. Hello All, I am using Wonderware InTouch 10.0 on Windows 7. It's slightly outdated, but its what we have. I am currently writing a script using the StartApp command to open a particular PDF file with the touch of a button. My script looks like StartApp("C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroRd32 C:\1.pdf"); The first part of the command runs adobe and the second part of the command opens the particular file "1". What I need to figure out is, how do I insert a variable into a string. For example I have 55 files I may potentially need to open up, all named 1-55. So I need the file I am calling to be a variable inside of the string so I can call it inside of a loop. I do not want to copy and paste this code 55 times, I want to make the file name a variable (tagname that is a memory real between 1 and 55) so I can run it in a loop. I have only been using Wonderware for a month or so now, so If anything is confusing feel free to ask. Thanks!
  15. Hi Everyone! Where are my experts? I am undertaking a project at work. The project contains analog style motor positioning circuits (operational amplifiers, integrators, and other PI elements). Not that this is relevant to the post yet ;) .It's my first PLC project ever! I am using the Schneider M258 with SoMachine 4.1 The PLC is talking to SoMachine via Ethernet (obviously I have a router between the PLC and my pc).I can Login and run the first POU I created. It's a simple And logic circuit for now. I have a co worker (c programmer) agreeing to help me pass data from my PLC to a browser screen. Although he's not familiar with PLC he's quite skilled writing code. He has wrote a Modbus protocol which allows him to interpret Modbus commands on his desktop.   1) Do I Need any special hardware to pass the data out of the PLC into the Router then into his browser. 2) As a trial can I send him MODBUS commands regarding my AND circuit? 3) How do I create such a command? 4) Is it possible for him to send me Modbus commands to change variables inside my program? 5) Are there web browser "plug-ins" for this idea? Thanks for reading and hopefully all of you can help me answer some of these questions.        
  16. Good morning everyone!   I tried to open an older project with Factory Talk View ME which was last opened with “FactoryTalk View Studio 5.0 “. The current version that I have installed and licensed is Release Number 9.00.00 (CPR 9 SR 9), Patch/Pack Number: 00, Build Number 241. Upon opening the project, I receive the following error message:   “The target HMI project is a legacy project (Factory Talk View v6.00 or earlier). Please use the legacy Tag Database utility to convert its tag database to the new format (Factory Talk View v6.10 or later) before opening the HMI project on a computer running on a 64-bit operating system. Refer to Help for guidance.”   I tried to use the Legacy Tag Database Conversion tool, selected “Create Factory Talk View Tag Database in new format”, then I selected “Factory Talk view Machine Edition”, selected the source folder and used the option to “Search Sub-folders”. After hitting the Next button it shows a list of available projects, but the one project that I try to convert is not listed.   Any ideas how to approach this? Is it possible to install multiple revision supports with Factory Talk View? So, far I always used the latest and just created the run time as an older version, if the panel I used wasn’t updated.   Please let me know what you guys think I should try.
  17. Is CP1H with Ethernet option board (CP1W-CIF41) is capable to communicate More than one client? If yes what settings I need to be Done?  

  18. [Utilities] - NX-EIC202 Utility

    Michael Walsh posted a topic in Download Comments

    NX-EIC202 Utility View File A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000. Submitter Michael Walsh Submitted 09/22/16 Category Utilities
  19. Hi all. My experience is using Studio5000 / RSLogix5000 to program CompactLogix PLC's. I need to use a basic (cheap) PLC to get data from a Control Techniques Drive (about 9 DINT's for Speed, Torque, etc) and then display on a PanelView Plus 600. Its a bit extravagant to use even a basic CompactLogix for this, so I believe the most basic AB solution I can go for is the Micro820.In Studio5000, to add in CT Drive comms, I simply just add a Generic Ethernet Module and setup the IP address of the CT Drive and the Connection Parameters and that is pretty much it. I look in the Controller Tags and there is my DINT array that I can interrogate for the information. Very simple.Anybody any clue how to replicate this in Connected Components Workbench for the Micro820? I cant seem to fathom it out at all?Just to clarify, I am not doing any control of the Drive from the HMI or Micro820, merely displaying on the HMI parameters like speed, Torque, etc.Thanks.
  20. Hello everyone, I have difficulty to setting up the GSM configuration or the serial RTU configuration so that I allow you with another RTU. I use Schneider CPU Modicon M340 in conjunction with RTU communication NOR0200H and a Modem Schneider SR02 MOD02. This is the first time I'm working on this kind of project, want to help me, I'm stuck and I need a solution, thank you for your time.  
  21. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.

  22. datalink - Etehrnet send recieve CJ2M Cpu

    Chickenkiller91 posted a topic in CX-Programmer

    Hi guys. I have 1 cj2m cpu33 reciving 3bits of info from 3 other plcs (all similar type cj2m cpu 34-33) The problem is that 2 bits are ariving the third one is not. See the pictures i uploaded:   I do not know these instructions, in the other cases it was working. However i noticed that the output plc had a different adress with D950. I changed the adress to D804 as you can see on the pictures but still not reciving the data.  I guess i will have to configure somwhere else also. All i found (https://www.myomron.com/index.php?action=kb&article=1416) on internet that i have to open this datalink tool from the integrator. When i actually do that of course i just get an error: FATAL Error. Cannot read the file.   How can i make this work? Is the other way to constantly send this one bit with ethernet? Any sollutions, advices are welcome!
  23. Hi to everyone,    I have done an intense search on the web and this form, also went on to the download section here to try out a simple RS232 program, so far I can't get it work. Long story short, I am working on a PLC CP1E( w/ built in RS232) to communicate with the PC hyper-terminal . PC will send a string of messages to the PLC, then the PLC will convert the message to a pulse parameter, eg. computer will send ( 90, 40) to PLC, then the PLC will take the string 90 to pulses parameter( PLS2) and 40 will be the duration period. I am willing to learn and try out your sample program, let me know! THank you in advance.  

  24. Connecting PLC to ethernet

    PenneyInstruments posted a topic in CX-Programmer

    Hello, Just recently bought a used CJ2M-CPU33 Omron PLC and I am trying to hook it up via ethernet. I keep getting an error F3. I figured it was because I didnt populate my I/O table so I did that and still no change. I have tried to connect to it via USB (which works fine) and then upload it a new IP address but no luck. Communication problems are my enemy and any help would be appriciated. Its a CJ2M CPU33 with a PA202 power supply. Analog in and out, digitial in and out cards. Thanks
  25. hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC.  there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com