Search the Community

Showing results for tags 'serial to ethernet'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 193 results

  1. Grupa ProfAs Sp. z o. o. jest firmą doradczą, świadczącą usługi w szeroko rozumianej dziedzinie Human Resources. Specjalizujemy się w rekrutacjach na stanowiska specjalistyczne, średniego i wyższego szczebla. Wierzymy, że nasz Zespół złożony z profesjonalistów jest w stanie zapewnić perspektywiczne spojrzenie i najwyższą jakość wykonywanych usług. Aktualnie dla naszego Klienta - firmy z branży automatyki przemysłowej - poszukujemy osoby na stanowisko: Programista sterowników PLC Kraków / Piła / Poznań ZAKRES OBOWIĄZKÓW: Programowanie sterowników PLC Siemens Wykonywanie aplikacji dla systemów SCADA i HMI Dobór konfiguracji sprzętowych PLC Testowanie i uruchamianie maszyn u Klientów końcowych (delegacje krajowe i zagraniczne) Wykonywanie programistycznych prac serwisowych u obecnych Klientów Sporządzanie instrukcji obsługi maszyn   WYMAGANIA: Bardzo dobra znajomość sterowników PLC Siemens Umiejętność parametryzacji serwonapędów, falowników, etc. Znajomość paneli HMI oraz systemów SCADA Znajomość sprzętowa oraz programowa komunikacyjnych sieci przemysłowych ProfiBus, Profinet, Ethernet, DeviceNet, Modbus, etc. Znajomość zagadnień i komponentów automatyki (przetwornice, serwonapędy, obwody bezpieczeństwa, aparatura modułowa, itp) Mile widziana znajomość programowania innych sterowników: Allen-Bradley, Omron Prawo jazdy kat. B Komunikatywna znajomość języka angielskiego lub niemieckiego OFERUJEMY: Współpracę w oparciu o umowę o pracę Udział w profesjonalnych szkoleniach Korzystne warunki wynagrodzenia Rozwój w firmie z doświadczeniem na rynku międzynarodowym nr w rejestrze 14990 Osoby zainteresowane prosimy o przesyłanie CV na adres k.dominik@profas.com.pl lub kontakt telefoniczny pod nr tel. 881 700 778.
  2. Hello, I need to make an ethernet communication Siemens S7-300 <> Omron G9SP. The HW of the Siemens that i us are CPU 315 2DP and CP 343-1 Lean. I did try to follow the Omron manuals Z922 and Z924, but faced with some problems. First of all in Z924 there is no complete HW configuration of Siemens (communication configuration is missing). Also, formats of messages differ in both manuals. Maybe there is an Simatic Step 7 project example, that i could open with Simatic Step 7 manager to do a deeper investigation, or maybe somebody has a lot more experience in this case? Thank you in advance.   WBR @rturas
  3. Hi everybody: I'm writing here because I have an Etherhet problem with my compactlogix 1769-L32E. I connect a crossover cable between my pC and the controller, then I run the BOOTDHCP server program . The BOOT DHCP window only shows the MAC of the PC, the controller´s MAC doesn't show even if i wait for more than 10 minutes I hope you can´t hel  
  4. Hello,             I need to communicate Power meters ( GE Multilin EPM 5500P) to  GE Multilin EnerVista Software. The present communication system uses Ethernet for communication from LAN Switch to Computer. There are a few existing Power Meters which need to be connected to the  Network. The Meters having output ports as RS485. I need to use a convertor for that right. So when I contacted GE they told me to use GE Multilinet Serial to Ethernet Convertor. But due to the price and unavailability of the material I am thinking to use a universal convertor. Is that compatible for Multilin Devices?? and In Case of using a universal Convertor does we need any other drivers for that. Please Help Me.. Thanks In Advance  mnetman-a3.pdf multinet (1).pdf PM-GE.pdf
  5. Hi Everyone! Where are my experts? I am undertaking a project at work. The project contains analog style motor positioning circuits (operational amplifiers, integrators, and other PI elements). Not that this is relevant to the post yet ;) .It's my first PLC project ever! I am using the Schneider M258 with SoMachine 4.1 The PLC is talking to SoMachine via Ethernet (obviously I have a router between the PLC and my pc).I can Login and run the first POU I created. It's a simple And logic circuit for now. I have a co worker (c programmer) agreeing to help me pass data from my PLC to a browser screen. Although he's not familiar with PLC he's quite skilled writing code. He has wrote a Modbus protocol which allows him to interpret Modbus commands on his desktop.   1) Do I Need any special hardware to pass the data out of the PLC into the Router then into his browser. 2) As a trial can I send him MODBUS commands regarding my AND circuit? 3) How do I create such a command? 4) Is it possible for him to send me Modbus commands to change variables inside my program? 5) Are there web browser "plug-ins" for this idea? Thanks for reading and hopefully all of you can help me answer some of these questions.        
  6. Is CP1H with Ethernet option board (CP1W-CIF41) is capable to communicate More than one client? If yes what settings I need to be Done?  
  7. FX3U to FX3U via wifi

    Good day fellow PLC ninjas! I have a question/ concern which I would love your opinions on. We have 3 FX3U PLC’s+ENET cards. Two of the 3 PLC’s move around in an EMS trolley. The other is a ‘base station’ with a GOT2000 connected via Ethernet. Base PLC IP = 192.168.1.11 HMI IP = 192.168.1.31 Carrier 1 IP = 192.168.1.61 Carrier 2 IP = 192.168.1.62 I have programmed the base PLC to use Active communication; we are using fixed buffer communication to send and receive data to/ from the Carriers. The carriers are set up as Fullpassive ‘slaves’. This part works well and the update time changes (using a counter in the base station) from 1s to 100ms (because it enters a different work station).  My issue is the following: using a network sniffer (WireShark), I pick up plenty of re-transmits and sequence number errors coming from the base PLC’s ENET card. This is troublesome and causes delays when the update time is required to be fast (100ms). I am sending and receiving 10 words of data. The wifi seems stable, and there is minimal noise in the area. The power has been turned down and the antennas used are suited well for the application. The antennas are at a similar height to minimize possible loss of signal. I have LOS (line-of-sight) to the carriers at all times; to at least one of the antennas (I am using 802.11n). Has anyone picked up issues or found settings which can be used for comms over wifi? I can easily do this using a S7-1200 Siemens PLC and have done so using 12x S7-1200 clients and 2 AP’s with 1 base PLC. I have also successfully done this using 8xFX3U client with a System Q base PLC. My suspicion is that the delay in reading and writing to/ from the BFM in the ENET card is causing this. I am not sure that if I change to a FX5U will help. The communication cards on the Mitsubishi PLC’s seem very limited. Does anyone have any technical details on the access times between the CPU and communications cards’ BFM? Help is as always, appreciated.
  8. [Utilities] - NX-EIC202 Utility

    NX-EIC202 Utility View File A nice little utility created by PMCR that calculates the power consumption for NX I/O, provides the I/O layout for a given allocation, creates symbols for use in CX-Programmer and aliases for use with an RSLogix5000. Submitter Michael Walsh Submitted 09/22/16 Category Utilities
  9. Hi all. My experience is using Studio5000 / RSLogix5000 to program CompactLogix PLC's. I need to use a basic (cheap) PLC to get data from a Control Techniques Drive (about 9 DINT's for Speed, Torque, etc) and then display on a PanelView Plus 600. Its a bit extravagant to use even a basic CompactLogix for this, so I believe the most basic AB solution I can go for is the Micro820.In Studio5000, to add in CT Drive comms, I simply just add a Generic Ethernet Module and setup the IP address of the CT Drive and the Connection Parameters and that is pretty much it. I look in the Controller Tags and there is my DINT array that I can interrogate for the information. Very simple.Anybody any clue how to replicate this in Connected Components Workbench for the Micro820? I cant seem to fathom it out at all?Just to clarify, I am not doing any control of the Drive from the HMI or Micro820, merely displaying on the HMI parameters like speed, Torque, etc.Thanks.
  10. Hello everyone, I have difficulty to setting up the GSM configuration or the serial RTU configuration so that I allow you with another RTU. I use Schneider CPU Modicon M340 in conjunction with RTU communication NOR0200H and a Modem Schneider SR02 MOD02. This is the first time I'm working on this kind of project, want to help me, I'm stuck and I need a solution, thank you for your time.  
  11. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  12. Hi guys. I have 1 cj2m cpu33 reciving 3bits of info from 3 other plcs (all similar type cj2m cpu 34-33) The problem is that 2 bits are ariving the third one is not. See the pictures i uploaded:   I do not know these instructions, in the other cases it was working. However i noticed that the output plc had a different adress with D950. I changed the adress to D804 as you can see on the pictures but still not reciving the data.  I guess i will have to configure somwhere else also. All i found (https://www.myomron.com/index.php?action=kb&article=1416) on internet that i have to open this datalink tool from the integrator. When i actually do that of course i just get an error: FATAL Error. Cannot read the file.   How can i make this work? Is the other way to constantly send this one bit with ethernet? Any sollutions, advices are welcome!
  13. Hi to everyone,    I have done an intense search on the web and this form, also went on to the download section here to try out a simple RS232 program, so far I can't get it work. Long story short, I am working on a PLC CP1E( w/ built in RS232) to communicate with the PC hyper-terminal . PC will send a string of messages to the PLC, then the PLC will convert the message to a pulse parameter, eg. computer will send ( 90, 40) to PLC, then the PLC will take the string 90 to pulses parameter( PLS2) and 40 will be the duration period. I am willing to learn and try out your sample program, let me know! THank you in advance.  
  14. Connecting PLC to ethernet

    Hello, Just recently bought a used CJ2M-CPU33 Omron PLC and I am trying to hook it up via ethernet. I keep getting an error F3. I figured it was because I didnt populate my I/O table so I did that and still no change. I have tried to connect to it via USB (which works fine) and then upload it a new IP address but no luck. Communication problems are my enemy and any help would be appriciated. Its a CJ2M CPU33 with a PA202 power supply. Analog in and out, digitial in and out cards. Thanks
  15. Serial communication of Micro830

    hello everyone, I'm trying to connect PC with Micro830 with RS232 cable for transfer serial data. However, the PLC can not receive the character from PC. I used ARD function block to read the characters from PC.  there is no error and the output of ARD function block is 0 when I debug ladder programme. the serial communication state LED illuminated once I send a character from PC to PLC. the channel of input is 2 which is the embedded serial port. I use an adapter from USB to RS232. Email: jeremietang531@gmail.com      
  16. Good day  I require some assistance with the configuration setup (GX Works 3) for FX5u PLC inter-communication (PLC to PLC), over Ethernet (using the built-in Ethernet port). The purpose of the inter-connection is data exchange. (Values stored within the PLC storage registers such as words and bits).  Does anyone perhaps support files on this such as a procedure or example? Thanks
  17. In general, this control PLC program is written in GX Works. I did a simple visualization on TIA Portal v14 (WinCC RT Advanced) and I would like to now test it on Mitsubishi FX3U driver with ENET Module. I do not have much experience in this kind of thing, I'm still learning. I know that someone previously made a visualization in LabView and downloaded the tags from the PLC using NI OPC Server. Someone also did visualization in iFix and also downloaded tags through server opc. I do not know just how or what program to download tags in PLC so that I can no longer use it in visualization in TIA Portal. Unfortunately I still have a connection problem. The driver is connected to the router. From the connection options with RT Advanced I chose in the connections tab Mitsubishi and entered the appropriate IP. Still nothing. I do not know if the lack of a connection can be related to a virtual machine (VM Vare Workstation 12) on which I have TIA Portal installed. The driver pings but can not connect. I also tried using KEPServer EX to connect and unfortunately also failed. (I have information about the can not connect). Anyone know what program I should use? or had contact with such a problem? I attach a photo of communication from my station to more visualize the problem. Thanks  
  18. Good afternoon fellow members,I once again ask for your help to know if any of you have struggled with similar issues. For the past year and a half, Every 1-2 months we seem to be losing communication with one of our PLC's/racks. We have in the rack a 1756-EN2T card (revision 3.006) that will flash as if it is communicating and status OK (green LED), yet we will be unable to ping it and our operator interfaces go into error. We could also not open the web browser page of the EN2T card, nor connect to the PLC/rack through RSLogix5000. As this happened over the weekend, the local electrician was called and he tried cycling power to the rack and there was no change after it came back on (not sure how long he left power off to the rack though). The problem seemed to be fixed after we told him to pull the EN2T card out of its slot and then re-insert it.We verified the CIP cinnections for this card and it is around 98 to 101 CIP connections out of a max of 248, so not too high. the card's CPU usage is 24-29%, so no indication of problems there. EN2T Card is set to auto-negociate, just like all the other cards we use at all of our plants. Has anyone ever experienced a similar problem?Thank you in advance for all your help and knowledge-sharing!
  19. Problem with Ethernet module CMM321

    Hi, I am new in the group and also a new user of PLC series 90-30 an we have a communication issue. I want to know how to go to baseplate configuration window through Cimplicity machine edition?
  20. Hi all. Firstly, I am not a programmer, I just need advice. We have HMI's using NS-Runtime and we keep getting this message. Now, this is why I am contacting you all. This has happened over 20 times on 20 different HMI's which we have replaced over the last 3 years. We have been told by our software supplier that the com port is "on it's way out". There is NO WAY over 20 hmi's over that period will deveop com port faults. So my question guys, can someone give me a few tips on what to try before I change HMI's over ervery dang mponth please? I am really at the end of my tether here. We connect our HMI's to the Omron PLC's via a standard serial. If we change to another HMI the machine communicates after obviously a long period of downtime. Should we reset the plc? I will take ANY advise please guys.
  21. Hi, I have the following configuration where 4 PLC panels, with each having a Q12PH CPU and QJ71E71-100 module. All these QJ71E71-100 are connected to a HUB using straight cable. From the HUB one connection is going to an I-Fix SCADA which is already communicating with all 4 PLCs using MC protocol. I want to send data from 3 of this PLCs to the 4th PLC in the same network using fixed buffer communication. Can anyone provide a sample program for the same. Send and Receive side. I am using GX Works 2 for programming. Your help is very much appreciated.
  22. Hello, I am hoping I can get some assistance configuring an Allen Bradley PanelView C600 (2711C-T6C). All a long I have been able to communicate with the HMI using Ethernet protocol, but after I switched communication settings to what my Professor recommended by using the Panelview software, the Ethernet connection seems to have stopped working. The HMI has now been reset to the factory settings (by pressing ctrl + shift during start up then selecting F1 when prompt appears asking if the user desires to return to factory condition of terminal). Once the terminal resets I am able to eventually get to the configuration screen. When in the communication settings Protocol says "*", Status says "Unavailable", I've changed the device name to "plc" and the Node Address says "0". When I click on the "Ethernet" option the IP mode says "DHCP" then the IP Address, Mask and Gateway all read "0.0.0.0". I get into CMD/DOS PROMPT on my laptop while the terminal is connected to my laptop via an Ethernet cable and type in "ipconfig" to see if my laptop is communicating with the terminal but it is not. The lights where the terminals are located are also not blinking. After plugging in several different Ethernet chords from the terminal to my laptop I am convinced the issue is not the cable. I've tried resetting the terminal several times as well and I'm having no luck. Can anyone assist me with regaining Ethernet communication with the terminal or some work-arounds? I see there is an option to use the USB but it looks like AB no longer provides the drivers on the website. If it helps, the manuals I am using are 2711C-UM001 and 2711C-QS001.
  23. Hi,  I'm trying to test the serial communications with my Micro820. I acquired a 2080-SERIALISOL so I could have "someone" to talk to. I want to use RS485, so I figured that I'd have to connect: Modbus pin 1 (D+) to serialisol pin A1 (+485) Modbus pin 2 (D-) to serialisol pin B4 (-485) Modbus pin 3 (GND) to serialisol pin A2 (GND) Now when it comes to CCW, the thing gets a little harder. I know I need to use the MSG_MODBUS block (in fact I need 2, one for the modbus and another one for the serialisol), and I guess I specify the interface I'm using on the TargetCfg field (data type MODBUSTARPARA). But how do I figure out that the Addr (UDINT) and Node (USINT) values are for my Modbus and Serialisol? Or am I doing it wrong? Does anybody know of any place where I can get some more guidance or even a funcional ladder program? Thank you in advance
  24. I have the Ultra 5000 Intelligent Positioning Drive for lifting purpose. Now currently the only way i am able to go online with the drive is through the Serial Communication cable (db9) and till the time i am online with the drive the movement of the lifting operation has to be put on hold.  So is the anyway possible to go online with the ultra5000 drive on the wireless network?  need some suggestion on accessing the drive parameters over wireless network instead of conventional serial communication cable. Thanks
  25. Dear All   Sorry for my English I have Siemens CM1241 (picture attach) and need to communicate with Intellisys XE 90 via Modbus RTU, period. The problem is, form XE 90 the connector is Phoenix Contact 2-Position Screw Plug Connectors MC 1,5/ 2-ST-3,81 1803578,or in other word, only 2 contacts form P9 COM1 = L1 , L2 (picture attach). How we connect it to DB9 Female in CM1241? What signal go to what Pin? How about the Ground? Do I need Resistor?   Thanks for all your supports   Best Regards