Search the Community

Showing results for tags 's7-1200 dataman 60s'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 30 results

  1. Hello, I'm looking for sample program to communicate Cognex DataMan 262Q, now i have connecting by Tags, 496 bytes input/output, but in manual i see :  
  2. S7-1214C All LED Blinking

    Hi everyone. Recently I get a S7-1214C ac/dc/rly plc, whenever i connect ac power all the indicating LED i.e 'Run/Stop , Error & Maint' start to blink. I can't upload or download any program. In TIA Portal V13 only accessible node is not shown. Anyone encountered the same problem? Please help me. Thanks in advance 
  3. hi there is a 1215c and a fatek B1 plc here. 1215c as master and fatek as slave. i want to read 10 16bit words from Fatek to 1215c and i use Modbus rtu 485. i have a problem with what comes from Fatek To 1215C. thx 2018-08-25_11-56-16.mp4
  4. Hello everybody. I need to learn PLC programming. I already have some experience with Ladder language and PLCSIM so now I need a real PLC to do more practice. I was going to buy the following unit: 6ES7211-1BE31-0XB0 http://www.eibmarkt.com/isroot/eibmarkt/Files/DatenblattE/NS6102812.pdf It has 6 Di, 4 DO (Relay) and 2 AI, that's more than enough for me to do some practice. Do you think it would be a good idea to buy it? Or maybe this PLC doesn't have some important component or device needed to work properly? (my company will give me the software). Thank you to anyone will help me. Have a nice day, Edoardo
  5. I am using an Omron NJ controller and a Cognex Dataman 260 bar-code scanner.   At this point I can trigger the scanner and receive data from the scanner via ethernet/ip. My issue is in converting the response from the scanner to something human readable. The bar-code I scanned reads "872-3GSq".  The results of the scan are located in the variable Dataman_to_NJ[8]-[11]. At some point I know I need to use the SWAP function but I believe my lack of data type knowledge in this system is hindering me. How can I convert the value in Dataman_to_NJ[8] to the string "87"? Any assistance would be appreciated.  
  6. HELP! Wiring 1214C DC/DC/DC CPU

    I am currently finishing my A.S. in Engineering Technology.  My Capstone course is to wire up a complete S7-1200 system using a 1214C DC/DC/DC CPU.  There have been no courses that have explained exactly how they are wired.  Only programming, which I am pretty good with.  There is a 120VAC to 24VDC power supply.  They want it to be wired to switches and lights for a simulator.  I am just not sure exactly how the I/O's are wired.  Is is sinked or sourced?  As far as I know, one sends the ground to the output, and one sends the 24v to the output.  I would love to speak with someone on how to wire this, as once I graduate, this is what I want to be doing, but I am stuck in a hard place as none of my classes taught us how to wire the PLC's and even worse, the programming class was all about AB PLC's.  I have not learned about Siemen's at all.  They should be pretty close to the same, but I know there has to be some differences.  Also, how they have it set up, there are 2 power supplies on the plastic panel just to the left of the picture.  This seems to me as this is a sinking I/O.  Am i off?
  7. Hello All,   I hope this post is not against any forum's rules. If so please delete.   I would like to invite everyone interested to have a look at my website, which is purely about TIA Portal and everything related: TIA Portal how to   There you can find articles, tutorials, tips and videos.   Hopefully someone will find it helpful. There are more materials coming so be sure to subscribe to Newsletter   There is also: Facebook Fanpage                          Facebook Group                         Twitter                         YouTube   Regards, Robert Jankowski
  8. Hi all, I will be starting on my MSc in automation in a couple of days so for that reason i have obtained a S7-1200 series 1211AC/DC/RLY PLC. This is a new area for me as i have been working in offshore since i graduated from my BSc a couple of years ago. I watched some Youtube tutorials on how the programming is done and i am ready to try it out for myself, but i have encountered a little problem.   Problem: I am using the X1 P1 PROFINET (LAN) port as a connection to my PC, this turns the Green Link light on and the Rx/Tx lights blinks orange. Now to the problem, i cannot connect to the PLC through the TIA portal, no matter what settings and connection types i use in the PG/PC interface box. I have had no luck finding leturature adressing how to configure the PC/software and get a connection to the PLC. Do any of you have a PDF or link which can help me through this problem?  Hardware: S7-1200 series 1211AC/DC/RLY 6ES7 211-BE40-0XB0 S C-J5PN 1614 2017 FS:05 Software: TIA Portal Version 13 STEP 7 Professional V13 WinCC Basic V13   Thanks   Best regards   Dennis    
  9. need help for TIA V13

    Hello Everyone,  Our machine with PLC CPU 1214c, was program last year using TIA V13 professional. Now i need to add some Expansion module for additional sequence, but i only have here a TIA V13 basic. When i tried to search the hardware; yes it can be searched, but it will not upload the existing hardware (CPU+ other modules).  My question is, if the s7-1200 PLc was programmed by TIA v13 professional , does it can only  be edit  by TIA v13 professional? is there any chance that  the basic version can edit the programmed.    Thank you all in advance for your answers...
  10. I have a c-more HMI and an Allen-Bradley 1200, is it possible to set them up with two AB 1764-NET-IAC+ to have my computer monitoring the PLC at the same time, I have established communication from my computer to the PLC through the IAC, but I haven’t been able to integrate the HMI, is it even possible?. This is been setup for training purposes, any help would be appreciated.
  11. You can buy books programming Modbus TCP / IP with C# language on Google's Play Store Link: https://www.youtube.com/watch?v=gC2Y...OgG_veiieCTor6
  12. Software for Siemens s7-1200

    Hi guys, i have siemens s7-1200 that i need to communicate with. Meanwhile i have programming software Simatic Manager ver.5.3. Can i use this Simatic manager to communicate with s7-1200, and how to configure its connection. Thanks and best regards, Harianta
  13. Micrologix 1200

    I have a micrologix 1200 series module which goes on fault mode after providing it in run mode and it shows an error of 81h whenever i clear the fault nd go to run mode i get faulted again. Please help guys  
  14. Siemens structured language SCL

    Introduction to leguaje SCL senior siemens. When I use it for better optimization tasks, how to handle it and what its structure to be known as a language PLC Open. See more at   http://www.tecnoplc.com/scl-lenguaje-estructurado/   PLC and HMI programming http://www.tecnoplc.com
  15. How to establish communication and TIA Portal PLC to detect the PLC within the network that we have defined in the project and thus be able to transfer the program to the CPU detected within this Profinet network. Read more... http://www.tecnoplc.com/comunicacion-plc-y-tia-portal-desde-el-proyecto/ Greetings. _________________________________________ PLC programming and HMI http://www.tecnoplc.com
  16. CPU communication parameters set in the TIA Portal project to determine what range of IP be having. This address is the one that will be within the range of devices that can communicate within a network. Read morehttp://www.tecnoplc.com/parametros-comunicacion-tia-portal-ip/ Greetings. _________________________________________ PLC programming and HMI http://www.tecnoplc.com
  17. codebar reader

    hey can someone please help me with programming the plc to test on a code transmitted by a barcode reader thank you
  18. S7-1200 firmware load on the CPU once we have it inside the card. What is the process and sequence of LEDs indicating which CPU is running at all times. Have a look and red amore at... http://www.tecnoplc.com/cargar-firmware-s7-1200-en-una-cpu-6es7-214-1be30-0xb0/ You can find some more inforamtion about how to update firmware at... http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ ------------------------------------------------------------------------------ www.tecnoplc.com
  19. Excel Add-in for Siemens S7 Data Logging

    Version 3.6.8.1

    189 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Siemens S7-200, S7-300, S7-400, S7-1200, and S7-1500 communications. No OPC, DDE, external drivers, or programming required.  
  20. View File Excel Add-in for Siemens S7 Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for Siemens S7-200, S7-300, S7-400, S7-1200, and S7-1500 communications. No OPC, DDE, external drivers, or programming required.   Submitter Automated Solutions Submitted 03/01/16 Category Demo Software
  21. DATAMN 60S

    hey can someone help me i dont understand how to communicate a DATAMAN60 with a PLC s7-1200 through an RS-232 communication the problem is with programming the module that contains the RS-232 port i dont know if the DATAMAN60 send data automatically or i have some programming to do thank you
  22. Hi: I know how to update the S7-1200 by this link: http://www.tecnoplc.com/actualizar-firmware-s7-1200-de-una-cpu-6es7-214-xxx-0xb0/ , but anyone knows about update the Firmware with other type of Memory Cards??? Is it available with 12MB or 4MB card??? Thank you a lot.
  23. Dear colleagues and siemens experts, I''m new in siemens. As all I make my program for PLC, but I need help with PID autotunig (pretuning) I use : 1.CPU 1214C DC/DC/DC (6ES7214-1AG40-0XB0) 2. 6ES7214-1AG40-0XB02. 16IN/16 OUT DC/DC/DC (6ES7-223-1BL32-0XB0) 3. 2x 6ES7231-5PD32-0XB0 ( 4 channel RTD analog module - PT100) We use 7(seven) Pt100 points with 7(seven) heaters ... so I need 7 additional outputs..... [you can see example of wiring in attached pic 6es7231-5pd32-0xb0-modules.jpg] Maximum heating point is around 220 degrees. I make my configuration for PID_Compact : 1. Basic settings 1.1 Controller type : Temperature : °C Set mode to : Pretuning ( sometimes I make it Automatic mode) 1.2 Input_Per(analog) -----> Output_PWM 2.Process value setting: 2.1 Process value limits: Process value high limit : 220.0 °C 2.2 Process value limits: Default 3. Advance setting 3.1Process value monitor : Default 3.2 PWM limits Minimum ON time : 0.5 sec Minimum OFF time : 0.5 sec 3.3 Output value : Default 3.4 PID parameters : Default I start Commissioning with these steps : 1. Measurement : Sampling time 0.5 Start 2. Start PID_Compact 3.Tuning mode : Start When I try first time my setpoint was 90 degrees , second time I try with 120 degrees. After 4-5 hours it stop more in Progress bar it stop when I reach a little more then 50%, and I stop PID. For heaters it is not normal to process to be 4-5 hours, there have some wrong. Example with 120 degrees : During process I make : When Input_PER reach 120[1200] degrees I stop physical access to heaters. When Input_PER reach 100[1000] degrees I start physical access to heaters So 4-5 hours is soo long time for this type process. Time to reach 120 degrees from 100 degrees is around 2-3 min. Time to fall from 120 degrees to 100 degrees is around 4-5 min. Total time for one whole cycle around : 8min. Sometimes when I set setpoint to 140, 150 degrees it writes me that output set value is to high after I give Start Pretuning ? Even sometimes when try for 120 degrees .... As all I want to start PID pretuning (autotuning) with setpoint 140 - 150 degrees. Which are minimum requirement to start PID autotuning with PID_Compact ? Could you send me some very simple example and steps that I must make or only steps ? I attached files in dropbox with images and program example, because I can't attached nothing here. This form don't give me access to attached something. So link is here : Even program is there. Thanks in advance Best regards : Altan
  24. Hello! I have a PLC S7-1200 (1212C DC/DC/DC) and a few question about programming S7-1200 in TIA Portal v13. 1. I want to make "upload station", because I am not surre whichone project is the last. But, when I start upload data, the error hapens, and the decription of error is: The name of the station "S7-1200 Station_1" is already in use in the project. How and where can I change it? 2. And the last question: I try to connect my S7-1200 and Weintek simualtion. There is all time :"PLC not connected". I have chceck everything: PLC is OK, communication PC-PLC ok (ping ok), windows firewall off, administrator rights ok, configuration made with manuals, (CPU - Siemens S7-1200, IP: 192.168.1.100, port 102, tags import - ok.) I have read the manual many times, and check settings - nothing change. Maybe have someone problems like this, and found a solution? PLC: 6ES7212-1AE40-0XB0 WIndows: 7 Proffessional 32 bit Program: TIA Portal V13 Basics Weintek: EasyBuilder Pro V5.02.01 Best Regards! Andrzej.
  25. Hello Everyone, I want to have a serial communication using Siemens S7-1200 with CM 1241 (RS-232) and communicate with my Arduino. Here is the setup of the communication. I have 2 temperature sensor and one Led connected to my Arduino, and on the PLC side I have S7-1200 from Siemens and CM-1241. Arduino and my PLC are connected just by using Tx and Rx pin no handshake is done. I am sending the temperature data from both the sensor to the PLC. on the PLC side i decide when to turn on the Led connected to my arduino depending on the different temperature values. I have assigning a ID to both the sensors before sending out the data. This is how the transmitted data from Arduino looks like $AOPT_TEMP1_20_TEMP2_21 . So far its good, I am receiving serial data on my PLC using RCV_PTP (received data are placed on the buffer) and sending data using SEND_PTP. I have also implement a filter on the PLC which will only accepts the serial data starting with '$AOPT_'. Now, I want to receive the temperature value from two temperature sensor TEMP1 & TEMP2 and then control the Led. For instance if (TEMP1>TEMP2 ) then turn ON the Led else turn OFF. I am able to receive the data on the PLC from Arduino but now I don't know how to proceed with comparing the received information. How do i extract the only required data from the received buffer? Any suggestions will be highly appreciated. Thanks in advance....