Search the Community

Showing results for tags 'rx3i'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 11 results

  1. PME Function block

    Hello Colleagues. I have to develop some PLC program for GE Rx3i. I'm a little bit confused with PME function block. As i understand parametrized block in PME it's Function at Siemens, Mitsubishi and others PLC's brands and it cannot use data memory inside. Classic FB in PME has 4 type for inputs Reference, Constant Reference, Value, Value Result. When i need use this types of input? As i understand analogy between PME and for example step7 or gx works:   - "Value" - input variable   - "Reference" - Input/output variable   But i don't understand how use "constant reference" and "value result". Explanation of it in has help, but don't provided any examples.   PME doesn’t provide any PLC simulators and i don't have real PLC, so can't test it in work.   Second question about UDT variables. I created UDT type for example for sensor, then created variable based on this UDT, but i can't set reference address for this variable. how put this variable to Scada or HMI without addresses?      
  2. Failed Uploading the Logic from GE PLC RX3i

    Hi Everyone, I'm in a maintenance team in a factory, I need to upload an existing PLC program for backup purposes. The existing PLC is (IC695CPU310) (With only two serial ports 1 & 2). I don't know in which version the program was developed and downloaded to the PLC but the factory was established in 2009, so I used PME Ver. 7.5 (to be sure of having a newer version). I have installed the PME in a laptop with Windows XP SP3 which have a built-in serial port. I used the Horner Electric mini converter cable (HE693SNP232A) to connect with the PLC port 2. I was able to go online but the LED of port 2 in CPU was not steady on all the time, it was on for most of the time but going off for a short time frequently. I put the CPU in stop mode and I could successfully uploading the hardware configuration but when I tried to upload the logic it goes to offline mode and gave me the following message: "Failed to upload or process Symbolic Memory Table. Please contact technical support". Then I connected the PME with port 1 (RS232), the LED of port 1 was steady on. When I started uploading the logic, most of the subroutines were uploaded subsequently but could not complete the uploading. Before completing the upload I received the following message: "Machine Edition Executable has encountered a problem and needs to close" and then PME was closed automatically. Anyone can help on how can I resolve this issue ?
  3. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.
  4. View File GE SRTP Ethernet Driver for .NET .NET Component for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE SRTP devices via Ethernet. Supports PACSystems, Series 90, and VersaMax.   Supports PACSystems symbolic variables and CPU rack + slot specification. Does not require 3rd party drivers Does not require OPC x86, x64, and Any CPU compatible Visual Studio.NET 2005, 2008, 2010, 2012, and 2013 Compatible Most .NET targets are supported, including Web, Win Forms, WPF, console, and service apps. Build Windows Forms, console, and ASP.NET applications that run on Linux with Mono framework. Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Free 30 day fully functioning trial version available for download Runtime-free for qualified applications   Submitter Automated Solutions Submitted 05/09/09 Category Demo Software
  5. Rx3i to Balluff IO Master

    Wanting to write to Balluff Smart Lights via IO Link Master IP #BNI EIP-502-105-Z015.  I can find lots of literature on setting up the communication via E/IP in RSLogix 5000 but haven't located anything with Machine edition for writing the data over IP.  I am utilizing an Rx3i platform with IC695CPU315 and IC695ETM001 for network access
  6. View File Excel Add-in for GE-IP PLC Data Logging ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for GE-IP PACSystems (RXi, RX3i, RX7i), Series 90 (90-30), and VersaMax communications. No OPC, DDE, external drivers, or programming required. Submitter Automated Solutions Submitted 03/01/16 Category Demo Software
  7. Excel Add-in for GE-IP PLC Data Logging

    Version 3.6.8.1

    62 downloads

    ASComm Excel Add-in is a simple to use, non-programmatic way to populate Excel 2007 - 2016 spreadsheets with data from PLCs, instrumentation, and other process hardware. ASComm Excel Add-in uses built-in drivers for GE-IP PACSystems (RXi, RX3i, RX7i), Series 90 (90-30), and VersaMax communications. No OPC, DDE, external drivers, or programming required.
  8. CitecSCADA to Rx3i Communication Setup

    Hi All, I am trying to setup the communication between GEIP PACSystems Rx3i and Schneider Electric CitecSCADA 7.1 Does anyone have the procedure? Thanks Chris
  9. Version 1.0.0

    31 downloads

    Updated Clock logic and HMI screen simple and well documented. To use this, 'Import' this 'Toolchest' Drawer file into your PMC's Toolchest. Then 'Copy' one of the Ladder Blocks into your 90-30 or PAC Rx3i Target by holding down the Ctrl key while drag-n-dropping it onto the 'Program Blocks' in the Navigator window. The QuickPanel Screen along with the 'Indexed Message Grid'  can similarly be brought into your QP or QP+ Target. If there is already variables in your project you may need to adjust some or all of those used here. The logic here also will help you to understand the Array_Move Function blocks in PME.
  10. Clock_S90_PAC_QP+.zdrw View File Updated Clock logic and HMI screen simple and well documented. To use this, 'Import' this 'Toolchest' Drawer file into your PMC's Toolchest. Then 'Copy' one of the Ladder Blocks into your 90-30 or PAC Rx3i Target by holding down the Ctrl key while drag-n-dropping it onto the 'Program Blocks' in the Navigator window. The QuickPanel Screen along with the 'Indexed Message Grid'  can similarly be brought into your QP or QP+ Target. If there is already variables in your project you may need to adjust some or all of those used here. The logic here also will help you to understand the Array_Move Function blocks in PME. Submitter RussB Submitted 01/05/16 Category PLC Sample Code
  11. GE SRTP Ethernet Driver for .NET

    Version 3.9.8

    1497 downloads

    .NET Component for use in Visual Studio.NET to create HMI/SCADA apps that communicate with GE SRTP devices via Ethernet. Supports PACSystems, Series 90, and VersaMax.   Supports PACSystems symbolic variables and CPU rack + slot specification Does not require 3rd party drivers Does not require OPC x86, x64, and Any CPU compatible Visual Studio.NET 2005, 2008, 2010, 2012, 2013, 2015, and 2017 compatible Most .NET targets are supported, including Web, Win Forms, WPF, console, and service apps Build Windows Forms, console, and ASP.NET applications that run on Linux with Mono framework Extremely high performance - 5~10 mSec typical transaction time Optimizes multiple register configurations into minimal transactions Tag database can be configured via code or visual designer Abstract base classes allow you to write generic code that works with all drivers Synchronous and asynchronous read/write methods Data change notifications Provides common user interface across all driver classes No limit on number of devices or data points Multi-threaded for high data throughput Includes extensive help system Windows, Console, and Web Example applications with VB and C# source code included. Easily connect office systems to factory floor. Free 30 day fully functioning trial version available for download Runtime-free for qualified applications