Search the Community

Showing results for tags 'rslogix v20.1'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 55 results

  1. I'm trying to replicate something I've done in an RSLogix5000 file without the usage of those convenient arrays.  I have 24 counters, for 24 hours in a day. I have a MapleSystems screen relaying this data in the warehouse. The logic I've tried to implement is as such If bit (HMI assigned for shift start) = 6 --------- Copy C5:78 to C5:130 with a length of ten. I'm trying to copy the 10 counters that will be displayed on the MS monitor into the part of the counters that are connected via tags. It's done like this so that if someone starts the shift at 8, it'll take from 8 + 10 hours into the same C5:130 ten registers to display it on any shift. When I copied c5:78 --> c5:130 w/ len:10 it copies the first value C5:78 into the tenth register C5:130, when I'm trying to have it copy those ten into the C5:130 starting ten, to display on the screen. What am I doing wrong here? It's as if that length of ten is acting as an indexer and if that's the case, do I have to do 10 copy lines for each hour I want to utilize this logic on? Thanks so much in advance!
  2. I've found very similar errors, but not exactly this one. Does anyone have any insight on how to remedy this? I'm using Factory talk and RSLogix5000.
  3. I'm having a difficult time updating some HMIs on a production floor using both Rslogix5000 and EzwarePlus. I've exported my CSV from RS, and in the importation stage, it shows I have no tags. However literally everything on the screen is already linked up to tags. When selecting an objects properties and clicking tags there, everything shows up. When in the address library nothing shows up, and my CSV after clicking import, does nothing.  Is there something brutally straight forward here that I'm just missing?
  4. Clearing an Array in RSLogix

    I'm having a tough time clearing the entirety of an array. I've tried using the copy function, the clear, the fill and the the file synchronous copy functions. I'm solely trying to copy 0's into the entirety of a 20 tag array. Example Tag[0] to tag[20]. I saw another thread here:  However, that didn't help me. Anyone have any shortcuts here?  Thanks so much in advance!
  5. Hi guys! Can anybody help me? I have an existing controlnet network. How can I connected a new module? Like an 1794 IB16. What should I need to do after I connected the new module? One more question: What's the difference if I do not connected the new module right after the last module, but I connected between already existing module. Then what should I need to configure. If anybody want to help, please write like step by step. I'm a beginner, but I want to imporve myself. Thank you for your help. I almost forget, I need to work with Allen-Bradley PLC, and I have RSLogix 5000 software.
  6. RS logix 5000 motion control

    Hi Guys! I have a problem with Motion axis move (MAM) command. There is an Allen bradley servo motor what is working well. But I need to add a new program section, wich is in  a specified moment, the axis should move a certain distance. I think I need to use the mam command, just I dont know how can I configure the motion control part. I need to make a new tag ? or what ? I need to use a user define ? PLS help me.   
  7. Any new tags I add in studio 5000 the HMI project shortcut cannot locate the tags, it says unresolved route to processor. It's the same shortcut all of the other tags are using. Please help. 
  8. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  9. Hi PLC programmers, I got a problem regarding my installation of Logix Designer/Logix5K. Here's the situation... a) Initially installed Studio 5000 without problem. b) I needed to open a program from Logix v20.1, installed RSLogix5k v20.1. After installing v20.1, RSLogix was corrupted and won't open program. c) Reinstalled entire Logix Software. d) Was able to open and convert program from Logix5k v20.1 to Logix Designer v24 but this annoying error occured on v24 (See attached "EN2T")... "Failed to Create Module Profile". All of a sudden, the module (1756-EN2T) I created with working v24 is no longer usable. Now, even when I create a new project, add a module with "Select Module Type", the list of available modules has been trimmed down to what it normally has (see attached "AB_Modtype"). Kept on re-installing entire Logix 3 times, clearing the registry with CCleaner and even deleted installation folder for Rockwell software but the problem is never gone. I even downloaded AOP for EN2T and installed it but to no avail. Now I'm lost and dumbfounded that uninstalling and reinstalling isn't working. By the way the OS I'm using is "Windows 7 Enterprise". I appreciate all the help I could get. Thank you very much. Sincerely, Andrei K.
  10. RSLogix 5000 Code Generation using C#

    I put together a demo of the c# library I am working on for Rockwell PLC. It basically allows you to parse/construct the L5X files for code generation, documentation, and other uses.
  11. Hi there, I am trying to create an Add=On Instruction to help me manage some alarm conditions in my application. My AOI has one Boolean output that is used for messaging on the HMI, but I'd like to also have another output (Boolean or integer) that would be attached to o global parameter so that if any alarm is activated, it will create a master alarm that can be used for machine control, and possibly messaging. The reason for this is that I may have numerous alarms and I'm trying to avoid having to create a series chain of all those alarms to turn on a master alarm. My thought was that if I can get any alarm to make a global parameter go true, then I don't have to manage other bits if I delete or add an alarm block. I'm having trouble coming up with a way to create that output that I can have load a TRUE value into a global parameter, though.  I was trying to use an integer so that I could just load a '1' into the variable if any alarm goes off, and a master reset would reset the value to zero. But I'm apparently not setting up the AOI parameters just right. Has anyone got a suggestion of how I can do this? I can share my block if that would help, it's nothing special, just a way for me to condense alarming features and this one seems to be a little tricky. Thanks for your suggestions!
  12. RSLogix 5000 version 20

    Dear Friends; Good day. I already installed following version on my workstation RSLogix version 10, 13, 16,17 and 19. Now i have some turbo machinery there logix develop in RSLogix 5000 version 20. If i install version 20 on my workstation is previous activation work or need to activate it separately? Regards   Solarboy
  13. Hello Friends; I like to learn RSLogix 5000, Is there and software simulator with complete explanation and learning. Please share the link where from i download it?  Next week i will visit Germany Frankfurt is there any shop where from i purchase it? If free download available i appreciate and please share the link. Regards   
  14. Hi everyone, I want to compare 2 programs with RS logix 5000 compare but logix opens the 2 ACD in L5K, with only tags.... thx for your help
  15. controller is not coming online with rslogix 5000, but i can ping the ip from the pc. getting the error message says "controller failed to come online - error 701-8004250B" appreciate ur help.
  16. Could someone please generate PDF report for the ACD files on the attached .ZIP file? They are all RSLogix 5000 v20 files, I needed them for a university report which the deadline is today, but I don't have access to a computer with RSLogix 5000 :S Thanks!
  17. We had to migrate over to a different domain and all of a sudden my Transaction Manager asking for a username and password and I have no clue what it is.  Any ideas on what could have caused this and why this is popping up?  
  18. Training for a complet SCADA Project made in RSlogix, RSview and RSlinks   Enjoy 
  19. Hi guys, Im using RS-logix 500 Pro for configure plc AB Micrologix 1400 1766-L32B. I would like to seek some help for enabling data logging feature for this device. Im not even know how to start it. I really need some help here. Thank you.
  20. Data logging format

    HI guys, does anyone here knows the data logging format for plc AB 1766? I had looked into manual but I cant find it,may be i'm miss look it.
  21. RSLOGIX 500 String

    Hi, I am trying to enter a new line in a string. For example " Line 1                           Line 2"   Can this be done in rslogix 500 ?   Thanks
  22. I am currently working on a fwd rev motor control routine, we have all of the circuit wired up and verified the physical circuit is working as intended when manually jumped. But will not turn the outputs on...  I triple checked my logic and it all seems right, all inputs are true all the way to the output on both the fwd and rev rungs. But still the outputs won't go true. if I toggle an output bit it does show up on the dc out card, I haven't tried forcing anything.  No errors or warnings, fuses are fine. our teacher does not help as much as we'd like and we have troubleshot just about everything we can think of with our experience.    Any input would be appreciated, thanks.
  23. RSLogix Tag Name Confusion

    I am trying to learn the logic of a process at my new job. There are tag names that I can't make sense of because they end with _xva, _xvb, _xvu, _xvd, _xvo, _xvc, _zsm, _zsu, _zsc, _zso, _zsd and so on and so forth. I know they are associated with motion, but I need to make better sense of them. There are no descriptors. What do they mean and is there a resource available that I can reference?
  24. Dear all, I have 1794 IE8H Hart flex input module to which one Emerson HART flowmeter is connected...I have gone manual of flex module...I have to write program to read 3 parameters from HART transmitter in RSlogix 5000 (compactlogics) manual there are so many & geeting confused how to get this...even got sample code from rockwell site...but still nt working...If anyone have any proper document to follow please suggest or mail me on
  25. Dear Friends; Good day. First i install the windows  virtual xp mode on Windows 7 64 bit. After installation i installed the FTM, RSLINK,and rslogix 5.0 in virtual xp mode.  Then i activate the software by Factory talk manager and select the hard disk and for a single computer activation. This process successfully acomplished. But when i open the RSLOGIX it shows popup that activation path is not found. Then i again open the factory talk tool and note that there is no activation shows in current activate products, But the activation detail shows in the RE host tab. I re hosted the activation by using go to Rockwell site and message show successfully activation re hosted.   *** Now i am stuck here is i loss my activation?  *** in windows xp virtual mode how i activate my product that application find the correct path of activation file? ** In windows xp mode if i open my Computer there is shows other hard drive partition as well as Local disk C:\  and activation file save in virtual drive instead of real C drive in windows 7. But there is no file path option to save the activation. Its by default save on C:\documents and setting\all user\shared documents\rockwell\activation\*****   Please help me how i activate my product in windows XP mode successfully?  Thanking you. i will remain Regards