Search the Community

Showing results for tags 'rs485 to ethernet'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 289 results

  1. Omron CJ2M-CPU13

    Karthikeyan_cmps posted a topic in Omron

    What are all the possible way to fetch data from nine Omron CJ2M-CPU13 for an OEE application. Is it possible to communicate by adding an EtherNet/IP module to it. I need to connect to Kepware Server.
  2. Good day, I am new in mitsubishi and have a question about how build built in ethernet communication on fx5u fw 1.050 gx3 1.047 with smc ex260 sen1, where i need send 2 bytes and receive 4 bytes can u help me? I try to send data with this format 2#0000000100000001 and send by Ethernet Active Tcp connection library where I have added the external device configuration ip and port SMC EX260 SEN1, I think I needed use a CIP protocol and port 44818 or Ethernet/ip, maybe I need add a ENET module to use this communication between my devices? Thanks a lot for answers
  3. Hallo, i want to connect Omron PLC CP1E use CP1W-CIF11 to AD4329A with RS485 communication.  my wiring is CP1w-CIF11     AD4329A SDA-                  SDA & RDA SDB-                 SDB & RDB and until now, i cant get data from AD4329A. Do you have any clue for this project?   Thank you Riandanu PLC to 4329A coba.cxp ad4329aex.pdf

  4. Direct Logic 05 Ethernet

    MikeC44 posted a topic in Automation Direct

    I have a control that I want to use a Direct logic 05 plc in.  It is a really simple program but it is going into a plant that has a main control panel that runs the plant.  I dont know the brand of the plc in the main control.  They want to be able to send me a command from their plc to the direct logic to turn on my unit.  I suppose that would mean a simple set instruction to my plc.  I also have a couple alarm conditions that I want to send them.  For example if water pressure is to low I would put my unit in the alarm mode and send them a low water signal.  If the chemical is low likewise,   I dont have a clue how to do this in my program.  Can anyone give me some examples in direct logic plc program for making this happen??? Thank you Thank you Thank you. MikeC

  5. Graphic Operational Controller

    manisha posted a topic in Mitsubishi

    Please give me the steps how to communicate GOC with Laptop using Ethernet and serial port I have using Codesys for Programming

  6. FX5U comm with A1SJ71QE71N3-T

    Luka0204 posted a topic in Mitsubishi

    Hi, does anyone has program example of ethernet communication between FX5U (GX Works 3) and A1SJ71QE71N3-T (GX IEC Developer). I need to read and write in both directions. Thanks
  7. I was wondering if I can use the ethernet and the rs232 interface at the same time with two different devices. A computer with RSLinx on the ethernet and and Arduino RS232 on the RS232 with DF1?
  8. I have a fx5u plc connected to 2 keyence sr 1000 qr code scanners using plc link. On random times the plc error light will light up and all ethernet connection will be disconnected and i cannot connect to the plc with gx works 3. If i put the plc in stop mode tho i can connect to the plc. I do not know what error code is causing this because each time i connect the error code is missing. The problem starts when the plc is in run mode. Can anyone help me with this as this is a persistent bug that keeps on happening in my system?
  9. Hi I am using a P342020 together with a HMID642 Magelis Panel. Using Unity Pro I have successfully downloaded a program to the CPU via USB. The HMI Panel powers up into 'Initial Start Mode' and is asking me to 'Download the system from your editor.' How is this done? How should the ethernet connections be made? between PC (with Unity Pro and Vijeo), M340 and HMI panel and where do I set all the IP addresses? I guess there is documentation somewhere but couldn't find it...! Regards   Andy
  10. Good Day, I am seeing intermittent bUs (communication bus) errors on 3 VFD's simultaneously.  These are Yaskawa P1000's with CM092 Industrial Ethernet Cards. There are Stratix 5700 switches between the drives and the Controllogix 1756-L75 CPU.  Happens every day to every week -- intermittent. Reading parameter F6-98, it indicates a 'connection time out'.  I don't understand why I would receive this fault.  IGMP snooping and querier are enabled on all switches, if that matters. I do not have unicast checked but Yaskawa said that didn't matter.  Packet time is 100 milliseconds.  I welcome any input on what might cause this.  One Yaskawa tech said I should set speed to 100 Mbps (now set at 10 Mbps). Any help appreciated.
  11. Hi All  I'm struggling to a PLC using WAGO's e!cockpit software which I am new to.  In the network tab when I click to select "ETHERNET" from the "Scan Settings" area all that comes up is a drop down with "update selection" which does nothing.  As a result I cannot scan for the PLC's on my network. Has anyone got any ideas on this issue.  I'm running on windows 10, could that be a problem?     
  12. Hi Friends, In My new project I have used two Delta PLC'S (DVP-60ES2 and DVP 14SS2) I want to communicate both through RS 485 Communication protocol.We have  tried communication trough manual help.But Master Slave device not communicating.We have checked for any error code in D1130 but it always showning "K0" value.here with I have attached screen shots and complete program for yours kind reference.Kindly help and guide us to communicate.   Master.pdf RS485 master trail 1.dvp Rs485 trail 1 slave.dvp Slave.pdf
  13. Hello, I have a fuel level reading system in a 2000 gallon diesel tank. the system has a slc 5 05 of rockwell. I need to connect the system to a printer located in an office 300 meters away from the tank. can someone give me lights about the type of printer I need and what communication technology to use, preferably wireless. Thanks.
  14. Hello.. I have hmi Proface GP-4301TW, USB type B cable and ethernet cable. I want to transfer the program to the hmi but I cant. When I turn on the power of hmi,  a series of test appears and finally it looks like the photo below and I cant enter the offline menu.. can anybody help me to solve the problem?
  15. Hi All, I am new with PLCs. Currently I have a project that required me to send a 12 alphanumeric (2D code scanned) from multiple CP1Hs to NJ101. Then NJ101 will directly send the data into a SQL (haven't made yet). So basically, there are a few hurdle that I face. 1) How send data from CP1H to NJ101.  - I have tried using _CPU010_SendData from CP1H but I'm not sure how to do the ladder or what to use on sysmac (NJ101) side. Btw, I really not familiar with sysmac.  This is the first project that I use sysmac.  - I have read about TCP IP, Fins/UDP and Fins/TCP but I'm not familiar with those method. 2) How to confirm that NJ101 has received the data from CP1H 3) How to arrange the data received from CP1H into SQL - This one I have a sample program that I can follow from my colleague. 4) Setting up a dummy SQL server just for the sake of testing. - I don't have any idea on this. I anyone have an application or software that can used to test the database function, please let me know.   Your helps are greatly appreciated!   Thank you! Bob

  16. Modbus Addressing in Weintek HMI

    rohandarji posted a topic in HMI & SCADA

    Modbus addressing in Weintek HMI to poll data from Temperature sensor through RS485. In my system i have connected Temperature sensor to I/O Scanner has output in terms of RS-485 which directly connected to COM3 Port pin. No. 6 (as Negative) & 9 (as Positive) of HMI (Model No: MT8071iE) and HMI connected to PC via ETHERNET. I want to read temp on HMI screen via MODBUS protocol. So, can you please provide me instruction about addressing of MODBUS register in Easy-Builder Software so can read data of corresponding register. Because when i do compile i got an error like " Device no Response". I hope i will get reply from your side as Fast as possible to overcome this problem. Thank you.
  17. All, I have been trying for days to find a way to control a yaskawa v1000 over Ethernet. I have been trying to use explicit messaging but I cannot find the instance class  etc in any of the yaskawa literature. All I can find is to use EDS files with RS5000 but I have a micrologix 1400 and I don't have that capability. If anyone has any recommendations let me know. Thank You, Liam M.     
  18. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,
  19. I am needing some guidance on an application I'm working on. I'm trying to obtain data from a profinet slave device to an Allen Bradley compactlogix PLC. I am using a Prosoft PLX82-EIP-PNC profinet-/ethernet-ip gateway as a median to allow me to access the profinet data. In RSlogix5000, I have created an EIP Class 1 connection for the profinet controller and AB PLC (248 words of input data, 248 words of output data). The same structure is created in the profinet controller (248 words of input data, 248 words of output data). The profinet gateway and PLC are communicating properly. From my profinet slave device, I have a specification that the data is structured within a 23 byte format. Connecting to my profinet gateway, I can see this data. I have attached an image that shows the specification of the profinet data and the data values displayed inside the profinet controller. From the PLC side, I'm needing to be able to see this data and put it in meaningful values. I am using the profinet slave device's internal temperature as an example to work towards. I'm not sure the best way to be able to handle this data and structure it to a meaningful value inside the PLC. (I am using the device's internal temperature as an example to try and get into the PLC).   Thanks,

  20. Parity Error

    KY WONG posted a topic in Mitsubishi

    Any one  have any experience to due with Parity Error when RS485 input can't get? Below is the circuit trace i get. It shown me that Parity Error when input signal from my device. But some of the time I can get the input message completely. Sometime can't. Is there any way to solve it?  
  21. Hello I have a problem with dl-ep1 ethernet modul. I connected the module to a IL-1000 sensor amplifier. There is some problem with the communication. How should I adjust ? I made some pic about the trouble. The sensor is a IL-600 laser distance sensor. I dont know yet how can I get the actual value.  Anybody knows how to set this modul ? If I think correctly after the right setting, if I check the sensor output:0 then, I can see the actual value of the IL-600 sensor. But unfortunatelly this part also not so clear for me, because I can connect about 15 sensor this ethernet modul.  Thank you so much if anybody help.
  22. I have a cpu33 that I had issues with a bad battery and it loaded from memory card.  The version on the card was old so I decided to download the latest version from 2 days ago to it.  When I did, I lost communication through ethernet.   Can't connect through usb either.   The thing that baffles me is that I can ping the plc at the address and I get a reply.   Any help/suggestions would be greatly appreciated as I am not familiar with omron plc's at all.  Also on the display it cycles through Er HE 1P 07.
  23. i am new in plc programming . i know the basics difference between the rs232, rs422, rs485. but i am little bit confused in it. so i have the following question regarding these terms. 1.  can these protocols communicate with each other i mean rs232 can communicate with rs422 or rs485 and same. 2. my plc has port rs422  but i can connect it with my laptop serial port which is rs232 ? 3. what are the main important points that kept in mind during communication or cross communications.   any help will be greatly appreciated.
  24. Hi everyone,  I am trying to use Kepware to communicate with my PLC setup which is the iQ-R Series R08PCPU.  I read the documentation which is available at https://www.kepware.com/getattachment/3daf1ac3-5c76-49ce-bbfe-f0fb1015f6cc/mitsubishi-ethernet-manual.pdf I read through the setup for Kepware and the setup procedure for iQ-R series but it still didn't work.  From the documentation, it said something about "using special ladder logic to enable ethernet communications is required.", I couldn't find anything about this online.  Here what I did in addition to the documentation: - Enabled IP Packet Transfer - Ping the PLC's IP Address which was successful Does anyone have any idea what I didn't do to establish that communication between Kepware and R08PCPU?  Thank you in advance. 
  25. I have a AB CompactLogix L43S with 1768 ENBT Ethernet/IP module. I would like to talk to a TCP/IP device (such as my laptop) from the PLC. How can I do this without using RSLinx?