Search the Community

Showing results for tags 'rs logix designer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 103 results

  1. Hi. I can get horizontal scroll, but no idea how to get vertical scroll if I have more events than event window has rows. thanks for clue
  2. hi dears, I have one CS1D omron Redundant controller ( CP65H) that must be connected to NS15 Touch panel. I want to use Ethernet for connecting HMI and CPUs (CS1D-ETN21D). I have one question. for NS15 we can use CX designer and sysmac studio? is it true? which one is better? what is your recommendation for HMI software? Thanks.
  3. Control Logix 5561

    Hello  We have just purchased some equipment with a Control Logix 5561 (1756-L61/B Rev 13.40). The compact flash card is missing from the unit but the seller says the unit was running in his facility prior to shipping. Does the 5561 have internal memory where a program is stored? Is the Compact Flash used only for recipes and persistent data? Thank you
  4. Excuse me , can anyone help me .. I made Graphic program with CX Designer-NSRuntime. But I'm having trouble making auto save/downloads my graphic. Because  in NSRuntime Graphics there is no auto save command. Please check my screenshoot
  5. I'm wanting to get upload the program from a CompactLogix L31 Controller.  I'm using a generic (non Allen Bradley) "C2G brand" usb -->rs232 cable coming directly off of my laptop because I don't have a serial port out.  The rs232 side of the C2G cable is a "pin out" or male end, and as you can see in the picture, the serial port at Channel 1 on the controller is also male.  I'm using a generic (non-Allen Bradley) null modem (female-->female) cable to complete the connection.  Ultimately, I'm not seeing the controller on linx.  But that's a result of me not being able to configure the driver.  When I try to auto configure this driver, Linx gives me an error saying, "Unable to verify settings due to a NAK!" btw, the rs232 cable going into channel 0 is for the HMI on the machine. A pv600 1. How do I get online and upload the program from the controller? 2. What does NAK mean?
  6. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  7. GT DESIGNER 3 - "SCREEN ERROR"

    Hey guys, I am trying to fix a problem with a machine for plastic jerrycans production, that i bought in the end of 2017 from a spanish company. That company refuses to help and assist us so i had to search for other solutions.  In short: i need to change a fixed value on the SCADA program of the machine to a variable value and i want to change it on the terminal i have installed on the machine (GOT 1000). The problem is dat whatever i change on the gt designer 3 file (if i move a button or a lamp 1mm to the side or change a letter) and then write it to GOT, when i try to open the screen where i did the modifications i get a white screen saying "screen error". Only replacing the new file for the original one i can continue to use my GOT 1000 normaly. I also wanted to translate some of the words because most of my employes dont know how to speak spanish and have some dificulty using the terminal correctly... I am corrently using 1.37P version of GT Designer 3 but the original file dat came already installed on the GOT was 1.165X.    
  8. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  9. logix 5000 array

    Hi Guys! I have a problem with array filling. I use rslogix 5000 software. I have to save the timestamp sometimes. I can save it with GET instruciton. Its a dint array which have 7 elements (year, month, day....and so on),  But my problem is I dont know, how can I solve that, they are in a bigger array. So like an array within the array. Idk it is possible ? I hope you know how I mean.  So I have 7 dint value in one array, and I want 1000 array for this. How can increase the position of the array number ?  Can anybody help me with that ?  Thank you in advance.  
  10. TRANSFER FROM NS15-TX01B-V2

    Hello Forum,We have a NS15-TX01B-V2 at our Plant in Uganda which we are using with a CJ2M PLC. We want to take backup from the PT to PC using Ethernet but we have not succeeded yet. We have consulted the manuals but they are not very elaborate. Someone here may know the step-by-step procedure we can  follow. to achieve our goal. We shall be very grateful.Thank you.
  11. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  12. I have a NB7W HMI connected to a CPIH over RS232. I'm connected to the HMI over USB and when I try to download my project, it starts the downloading GUI process and fails at a random time and shows a popup that says "data reading error". The HMI is locked up at this point and needs to be restarted. This is a fresh HMI and has not previously had a program on it. I created a blank project to make sure I didn't do anything weird in my program, but got the same result when I tried to download. Has anyone experienced something like this before? Its made it as far as 50%, and has also failed almost immediately.   Thanks in advance. 
  13. Allen Bradley

    How could I find ON State duration of an Input/Output, in Compact Logix PLC? So it would help me to show in HMI that how long the I/O is ON.Kindly assist me.Thanks in advance
  14. Cognex VC5 Vision Controller

    I'm looking for some help in regards to programming an Omron PLC (CX-Programmer) to control a Cognex VC5 Vision controller to trigger CIC5000 cameras. I have the Ethernet/IP mapping and I am able to send user data to the VC5 controller at this point. I believe there a steps I'm missing within the Cognex Designer program to send notifications to the PLC but I'm not sure where to start. Any help in pointing me in the right direction is much appreciated.
  15. Insert existing attachment A lot of automation cells we get done are made outside of shop so we don't typically have any current acd files for the plc. I am trying to make changes to the program but uploading seems to be giving me some problems. The initial upload seems to work fine I can select a file to save to and I begin to see the file being upload, the problem comes after about two minutes near the end of the upload. Attached is the error I see after the upload stops. Has anyone seen this problem before and know of a solution? Any help would be appreciated. Current controller Studio 5000 Logix Designer 28.03.00 1756-L71S
  16. MAOC Instruction Help

    I'm using a 1732e-ob8m8sr scheduled output block and the MAOC instruction to create a punching task. I'm already somewhat familiar with the instruction but I'm not sure if you're able to have two different MAOC instruction scheduling to the same armorblock. The first five outputs I want to make an output cam using position and duration as the condition for a punching task, but the last three outputs are cutter blades that need to be enabled at specific start and end position. I would also like to be able to phase shift (compensate) these features separately. Can I use two MAOC instructions as long as they don't try to overwrite the same output?
  17. HELLO GUYS . I am new in mitshubishi HMI gx designer 3.I have made simple program in which memory bit m0 is used to start counter (limit 5) and M1 bit is used to reset counter. Now when i press reset switch (M1) first it will ask for password then it will reset counter. how can i do this..please suggest. thanks 
  18. Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
  19. Hi my problem may have a simple solution but i cant work it out. I need to use the Divide function but it wont let me use a decimal point in either Source A or Source B. Is there a way to use a decimal point in Logix 500 Math instructions? Im using an AB Micrologix 1400 PLC. Can you only use math instructions with whole numbers? is there a way around this? Thanks James
  20. Hi. I am new to Allen Bradley PLCs and bumped into the following issue, that I cannot find any solution to. When trying to add a module to the I/O configuration I get the attached error, error code 80131940. This prevents me from adding any hardware configurations in Logix Designer. I have tried to reinstall Logix Designer and uninstall all AOPs. I am running V30.00.00 on a Windows 7 Enterprise SP1 OS. Your feedback is very much appreciated.
  21. Hello I have an old test rig (hydraulic cylinder applies pressure to a crank in sawtooth pattern) project written in gx developer for the Q03 plc. To this plc is connected a 1041 beijer panel, I have uploaded the project to E-designer. I am rewriting the sequence code because a new but similar test is prepared. Have a PID-block in gx works 2 (not in a simple project sadly) i would like to import  and use in gx developer. This is causing me some trouble though.  Can anyone tell me how to get the PID-blocks from GX Works 2 to GX Developer? Do you recommend me to upgrade the project to GX Works 2 instead? How will the panel react? I need to reprogram this as well. Cheers // Rolf
  22. I have a program that I as building in SoMachine V4.3 and Vijeo Designer 6.2. Everything is coming together well at this point but I can't seem to figure out if I can put a poteniometer type object on the HMI using Vijeo Designer. This will be used to control the speeds of some VFD that are connected to the PLC. I have found ways to use a meter or simple numeric input it change the WORD that controls the drive speed. I would really like to use a knob or slider bar as I believe it would be a nice function. I've tried it on two different Magelis screens that I will be using for two different projects. One is a HMISCU8A5(controller and HMI in one unit) and the other is a HMIGTO3510.   Thank You
  23. I am using NB Designer for last one year without problems. But from last week i am getting new error Background PLC control recorder 0 error! while compiling and not able to update the HMI. Please help.
  24. MNET to OMNI

    Good morning all, does anyone have any experience communicating to an OMNI Flow Computer through a MNET card, Im getting data back but it is not what i expected.  Should I be using Enron/Daniels? Byte Swapping? Thanks
  25. Hi guys,  I have been trying to sync up my RSLogix 5000 tag to GT Designer 3 (GTD3) objects but I noticed that GTD3 only recognize certain native data types from Allen Bradley Logix5572 Controller (Model 1756-L72).  In the documentation that I found, it show that certain AB Native Tags are transferable to GTD3 Data Type (See the attached file "AB Tags to GTD3 Tags" ) One of the User-Defined Data Type from the RSLogix 5000 that I am trying to sync to Text Display Object in GTD3 is called "UDT_MY_CLTR_INFO" here is it's hierarchy of inheritance from RSLogix 5000     Name                                                                     Force Mask                                                                                   Data Type MY_CLTR_INFO                                                     (...)                                                                                                 UDT_MY_CLTR_INFO      MY_CLTR_INFO.NAME                                                                                                                                           STRING           MY_CLTR_INFO.NAME.LENGTH                                                                                                                      DINT           MY_CLTR_INFO.NAME.DATA                                                                                                                           SINT[82]    In my exported tag which is a CSV file, it doesn't list the sub-classes MY_CLTR_INFO.NAME, MY_CLTR_INFO.NAME.LENGTH, and MY_CLTR_INFO.NAME.DATA, it would only list MY_CLTR_INFO.  How do I link up my "Text Display" Object in GTD3 with the tag "MY_CLTR_INFO.NAME" whose Data Type is STRING and GTD3 does not have a STRING Data Type?  I appreciate anyone that took their time to read my problem and any attempt to help me out. Thank you.