Search the Community

Showing results for tags 'rockwell controller'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 67 results

  1. hello guys>> i have cpu compactlogix 1769-l32e  and i have a program on my flash memory with extension p5k with version 17.004 (17.4) but this version became out of date i tried to find it at Rockwell Automation site but unfortunately they told me that "this version became obsolete" , so if any one has this version "17.004" on his device , please send me it . because this topic is urgent in my career.
  2. Omron_control

    Version 1.0.0

    12 downloads

    New app developed - Omron_control for connection Android smartphone and OMRON controllers.
  3. View File Omron_control New app developed - Omron_control for connection Android smartphone and OMRON controllers. Submitter sasha Submitted 08/17/19 Category Utilities
  4. CompactLogix E/IP to Kuka KRC 4

    Hello everyone,   I need to communicate a CompactLogix to a Kuka KRC 4 by Ethernet/IP but I do not know to generate the EDS file..... any clue please ?
  5. Hi all I have a project where i am building a bread softness tester.  To do this i am using a smc electric actuator and an A&D scale. The electric actuator will push down on a slice onto an A&D scale.  A micro830 plc is then reading the data from the scale and storing the real variable in an array 80values long.  I would like to display on the hmi (panelview800) the peak/maximum value in the array. I am struggling on how to do this though and have not found much information online. any help would be much appreciated Thanks in advance Trevor
  6. Please help find a controller. We require a controller for 8 nema 23 stepper motors. Must have pulse direction and at least 8 axis or more (16 would be nice). Must have kinematics for linear and circular motion. Must be able to use gcode such as G01 X10 Y10 Z10 A10 B10 C10 U10 V10. Must have axis parameters for all 8 axis eg velocity, rotations, etc. We also need the drivers. Must be reasonably priced under $1000 or so. We found Dynomotion KFLOP which can do 6 axis and we kind of made it work for 8 axis. It is super cheap at around $250 plus KStep drivers so under $1000 total with free software, unfortunately, it can not do kinematics for 8 axis. 
  7. Hi everybody I have a elau c400 controller trying to connect it to a mc-4 pacdrive. But I realized that the wd led on my c400 is on and it can be a fetal error. Anybody has this experience? Regards.
  8. i want to connect omron vision controller fh l550 with Soft PLC (IPC) from Siemens  through Ethernet or  RS232c interfaces, should i use a unit for the communication or can i directly connect the Omron Controller with IPC ?  the IPC is connected with other devices via profibus .
  9. Mitsubishi PID controller design help

    Dear all, I need help in design of PID controller in Mitsubishi PLC fx3u, I what should be parameters for initial, and how to start and stop auto tuning.
  10. I keep getting a 404 whenever I try downloading anything. Is anyone else having this problem? 
  11. Hi Everyone. I need help bad. For some reason the RSLinx Classic on my computer was not working. I decided to re-install it but could not do that. Then I uninstalled it  but would not. I reinstalled all others but RSLinx would not. I cleaned the registry and again did not succeed either to install or uninstall. Does anybody have an idea what is going on? Please help. Thanks.
  12. controllogix and 500 on IPAD

    Hi, Is it possible to get RS5000 or slc 500 software on an ipad to fault find and troubleshoot or even make edits.
  13. Hello,, I have motion controller A series A172SHCPUN,, I have written the program ladder into the CPU, but I can't write the motion program.. i dont have the program to open file the program motion and I want to ask if I have the software SW3RNC-GSVE, my os computer is window XP, Can it be installed? and is the cable transfer used the same as the ladder transfer program cable (SC09)?
  14. Hello everyone, Working in Automation for the first time as a Co-op student so i'm fairly new to PLC's and the Automation field in general. I've recently been tasked with converting a RSlogix 5 program from an old PLC 5 project into a Studio5000 project. I referenced the manual (I'll attach link below), and had no issues using the RSlogix Project Migrator tool that I downloaded off the Rockwell website. My problem is that once I convert the program, my I/O tags that were originally sequenced in octets(0-7, 10-17, 20-27, ...) from the RSlogix 5 program, are switched into a sequential scheme in Studio5000 that just increments them in order (1, 2, 3, 4, ...). I hope this make sense, but basically the first seven tags match between the projects, but then I:010 in rslogix 5 is equivalent to I[8] in 5000, I:011 is I[9], and so on and so forth. Has anyone had this issue before and found a way to have Studio5000 keep the original octet scheme? I don't see this normally being an issue, but the customer has specifically asked that the I/O tag names be kept the same as the original program. Thanks for any help. - Ben   Converting PLC-5 reference manual link: https://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1756-rm085_-en-p.pdf
  15. RSLogix 5000 Code Generation using C#

    I put together a demo of the c# library I am working on for Rockwell PLC. It basically allows you to parse/construct the L5X files for code generation, documentation, and other uses. https://www.youtube.com/watch?v=kV0nXSyM7Gg
  16. Pls help set up QD75P4N

    Good day sirs,  i am a newbie at this motion controller setting. I would kindly like to ask for an assistance from all of you. i copied all the necessary data that i have on this project. I installed the wiring correctly i am able to Jog the servo motor. But when i try to Jog the motor Using GXWorks 2 i wasn't able to do so because its not showing any movement on the Mr J4 and the motor it self. is there any settings that i should have change? thank you for the time if you will need any information i am willing to give it thank you   I have also attached the GXworks program and the servo conifiguration   Please help me thank you project 1.gxw Servo 1.mrc2
  17. Square Wave Problem With Micrologix

    Hello all, this is my first post. I am using an AB Micrologix 1400 (1766-L32BXB Ser C FW 21). I was trying to generate a pulse train using the PTO instruction. I have modified PTOX funct. file. The ladder is just a simple XIO followed by PTO, (The Quick Start ladder from 1766-RM001). When I looked at the output waveform on my oscilloscope, I noticed that it wasn't a square wave. I decided to run it at several different frequencies to see how the wave form would change. At 10Hz i got a square wave. As I increased the frequency the falling edge became sloped and almost horizontal. Is this how the output should behave? The data sheet indicates a max frequency of 100kHz, but at frequencies over 150 Hz. The wave form looks like the output of SMPS. 
  18. 1756-L55/A Controller

    Respected Friends, Good day. I face a serious issue please help me to fix the problem.  We have a 1756-L55/A controller with 1756/M13 A memory card. after 2 or 3 months the program washout and the LED status on the controller are following 1. RUN --- SOLID GREEN 2. I/O--- OFF 3. RS232 --- SOILD RED 4. OK --- SOLID RED 5. BAT-- OFF 6. FORCE-- OFF  At that time CONTROL NET MODULES OK Light for Chanel A and Chanel B are also blinking and communication not established via control net and serial port AB-DF1. I switched off the power supply and after 10 second again power up the controller then OK LED becomes solid green.  i download the program and its run fine. But the problem is still there. In the controller properties the major fault shows  TYPE 01 [ POWER UP FAULT] CODE 60 [NON RECOVERABLE FAULT] what are the possible reason for wash out the program from the memory?  At that time version 16.03 firmware installed and the rslogix program convert from version 10 to version 16.03.  Is 1756 L555/A with 1756/M13 A support the version 10 firmware? i ask because the original program is in version 10 if its supported then i update the firm ware and download the original program.   Hope you will help me in this issue. Regards
  19. Hello I have a scenario that's been bugging me for some time now. The scenario consists of a Micrologix 1400 that I need to control it's output from modbus/tcp. In detail what I really need is to be able to manipulate the O0:0 through modbus/tcp. The PLC would be the master and I would be the slave that triggers the connection to the master. I'm using a Modbus-Client on my PC and that should be the slave. Any idea as to how I can manage that? Currently I can send data to the master but everything is "stored" on B10 and I have no idea how I could write directly on O0. Thanks a bunch guys. PS: I'm borderline noob. 
  20. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  21. Hello I am  a Robot Programmer. Fortunately  I would be beginning the PLC Programmer Interview Process. From Initial CV Screening and first round of Interview. Screening was easier. But unfortunately I am not good with PLC tech questions apart from that is involved with Robot Programming. I need a few questions to judge whether the applicant is faking his experience or does he has the qualities. If any PLC Programmers can help me, It would be a great help for me.   Thank You
  22. Is it possible to add another AB Rockwell PLC to the network tree as a Generic Ethernet Module and use it as IO? Any idea where I would find information regarding assembly instance and size of I/O/C for AB Rockwell products? If possible, what are the pros and cons when compared to produce/consume and MSG instructions? Don't need to use it real world, just curious. Many thanks in advance.
  23. Clearing an Array in RSLogix

    I'm having a tough time clearing the entirety of an array. I've tried using the copy function, the clear, the fill and the the file synchronous copy functions. I'm solely trying to copy 0's into the entirety of a 20 tag array. Example Tag[0] to tag[20]. I saw another thread here: http://forums.mrplc.com/index.php?/topic/14678-clearing-an-array-in-rslogix-5000/  However, that didn't help me. Anyone have any shortcuts here?  Thanks so much in advance!
  24. Hey Guys, I'm somewhat new to Data logging so try to bare with me. I'm trying to setup Data logging in Factorytalk View SE to log to my SQL database. I have created the 32-bit ODBC system DSN. Created the datalog model in FT View Studio and selected ODBC and it created my tables fine (Float, String, Tag). I chose Login required. I also setup a File backup path. With that being said, when I use the command DatalogOn- It will start the Datalog model without any errors, but will only log to the backup path. It isn't logging anything to my SQL DB. I thought it could be the firewall blocking it so I created a rule to allow connections through the specified port. SQL is also allowing Reading/Writing.  Let me know if you guys have any suggestions. Thanks!
  25. Hello i'm new in all things about plc, i do a project for school and i use a festo fc 34 plc. The plc is programmed via serial port RS232 my pc not support a serial interface and i use a RS232 to usb adapter. when a try to download the program to plc give me a error: "ERROR: Cannot access controller".  What i do wrong.  Thank you in advance and sorry for my English. Have a nice day.