Search the Community
Showing results for tags 'qd75ms module mr-j3-b program with functional block sample'.
Found 158 results
-
I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC: -Online > Read from PLC -Select PLC Series: QCPU (Q mode) -Select PLC side I/F Serial Setting: Serial USB -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit: -Online > Monitor > Monitor (Write mode) -Execute the function below when mode is changed: Checked all -Edit the program (basically just deleted one -||- contact and drew back the line) -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
-
Hi fellow PLC veterans, I am new in the PLC world so please forgive me if my questions read dumb to you.. I am just wondering if there are any newer PLC machines that can: 1. keep the program even after its battery is completely flat or faulty (Is this even possible?) 2. allow users to copy and save the program somewhere so one can install the program again without the need/presence of the machine supplier What tools/software may be required? Thank you for reading and look forward to your response :)
-
Does anyone have some delta isp function blocks they can share with me please
-
Hi All, Please see attached screenshot: Whenever I want to save the ladder program or start simulation, this window pops-up. If I press 'yes' I loose the whole work. I tried to open existing program and modify it, but it did the same. When I clicked 'yes' I lost all modification and just the original program remained. (I made the program in the morning, opened and saved many times but it started popping this window later.) I work with FXCPU series, FX3U/FX3UC type, simple project in ladder. This worked well but now is not anymore. I use Melsoft GX Simulator! Can anyone advise why this is happening? It is very annoying! It is pointless to work on anything now! Many thanks
-
hello Every one, I am using a CP1-L PLC and want to communicate to domino ax350i printer over TCP/IP socket programming. For socket programming, I used Omron Function Block CPU012_SendCommand. I defined network ID and node address. However, I am getting 0502 error which means routing table is not set yes. So, how can I set routing table for both devices?. my PLC on 192.168.250.1 and Printer is on 192.168.250.123 node 7000. Can any one suggest me best way to do. Thank you attached file is for what I did in setting and program for the communication.
-
Hello! I'm trying to connect my QD75M2 with a MR-J2S40B1 Servo amplifier with an SSCNET cable. The problem is when I try to turn on the Servo ON/OFF on the Intelligent function in GxWorks2, an error occurs saying the servo amplifier is disconnected with my QD75M2. I'm confident that I've wired it properly. What could be the problem? Hoping you might help. Thank you.
-
AOP installation broke module RSL5000
JustinSmith posted a topic in Allen Bradley / Rockwell Automation
Hello, My coworker and I are commissioning a new panel. We have a 1732-AENTR series C remote IO thats Rev 6.1. The project file from a previous identical panel has the module at rev5.3 in the project tree. I downloaded the AOP and ran the installer, it worked no issues. My co worker then did the same thing but now the module is unrecognized in the project tree and the module is missing after installing the AOP. Im concerned he corrupted something. I tried uninstalling and reinstalling the AOP but no luck. It works on my computer but not his? TechConnect said something about corrupting the aop core. My coworker did the first install and he was getting confused about zip files and the virtual machine we run rsl5k on. Maybe he broke it? any suggestions? -
analog output card 1734-OE2V parameters, fault/actions, program mode
Jiggadoo posted a topic in Allen Bradley / Rockwell Automation
I have an analog output card 1734-OE2V and there is in the fault/actions page parameters for program mode. What is program mode and when it is activated? Fault mode is clear but... Program should be written the value, but when this happens? -
I need som help and suggestion how i can control 2 pumps that shall go 10 times each?i have 2 level sensors that is giving it the start and stop,and pump1 shall start 10 times,then pump2 shall start 10 times.Can i use CNT and how is the best smooth way to do it? thx
-
Hello Im trying to read from my PLC but i cannot see the program file. However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?
-
Hello , Is my frist project on Omron and also on Sysmac Studio . I have one PLC NX1P2 - 9024DT1 I write a sample program on ST with internal variable ( struct ) but i receive an information that i dont have permition to write on Var Ps. I can uploaded file with image
-
Hi, There are two machine in the factory controlled by Fx 2nc PLC. One machine control part is not working. It could be for battery failure. But the other one is working properly. In this case can I change the battery? After that, is it possible, I upload the program from the good machine PLC and download it to the other machine PLC? Regards Sohel Ahmed
-
Hello everybody, i have some uncertainties going through my head. i am fairly new in PLC word, graduated last year, last 12 month i did project on Siemens PLCs, but now i have to expand my view with Mitsubishi. 1. i am working on project with several conveyors. for each conveyor type i have FB fairly similar to my FB in siemens. For all conveyor i am using same sdt containing 32 bits. So a have array[0..20] of said sdt. But in fb i was not able to copy item from array, through input var containing index of that item to vocal variable, which i wanted to write back to the array at the end of fb. I tried different approach -> using item from array *** input/output. When monitoring item from array i can see, that variables i change in got2000 panel are in fact changing. But when i monitor fb itself, those same variables are not changing. i reworked this fb several times, for example when i found out that FB variables FB FXcpu cannot be set as retain so i would like to use it and i see no other way than make this fb work. :D 2. Is there possibility to us FB in another FB? I remember that i read some restriction about this, but now, i cannot find it. Thank you everybody for your responses
-
PF527 Control Sync Alarm / Module Sync Alarm
Jiggadoo posted a topic in Allen Bradley / Rockwell Automation
Hello Sirs! I have a problem with PF527. I get alarms 'control sync alarm' and 'module sync alarm' occasionally. I suppose this meaning that PLC is missing some data from the PF527 device. How to confirm this or what should I do with the problem? Any ideas? Motion group update period is 8ms. Also this device is the last device in the ethernet line. I am thinking to pull the cable directly to the switch near PLC. I am not sure does it help? -
Hello, We have a FX3G connected to a FX3U-ENET-ADP inside a main cabinet. We are then using that master PLC to collect data from 2 other fx3g plcs in a node:node serial network. I was assigned a small project of pricing out some wireless adapters so we can upload/download to the two slave plcs. My question is, is it possible to upload/download programs to/from the slave plcs through the ENET adapter and serial network in the main plc? It would save us some money if possible. thanks.
-
anybody who may read out telemecanique cartridge
stefanfd posted a topic in Modicon / Telemecanique / Schneider Electric
Hello all, is anybody out there who may read out a program that is stored on a telemecanique cartridge (more or less of 1993)? Program is still running on a TSX 47 40, but have an identical second cartridge. I would send it to him/her even if international post and do not necessarily require the cartridge back. Would be great to have the program as a text file / pdf / hardcopy. Any help appreciated!! Best regards Stefan -
Hi every one After sending some command to plc using fatek FBs CBE module , router internet connection goes off and internet LED turn red. i mean it works fine for a minute.. then internet connection of router will be off... why this happens?
-
Hello i have problem about connection between QD75M4 AND MR-J2S-40B now MR-j2S is display "Ab" every time i can't solve this problem
-
I am looking for how others have set up vertical axis motions using the Kinetix 5700 servo system. I have a 2 axis pick/place unit with a horizontal axis (X @ 2500mm) and vertical axis (Z @ 1200mm) that works as designed during normal operation. X axis has no holding brake and Z axis has a factory installed 24vdc to unlock brake. There is a GuardLogix L81ES control system that handles the safety and control. On pressing E-stop/opening Gates the vertical axis will stop the motion, apply the brake and hold with no problems. (2198-D032-ERS3 Drive, 2198-P031 Bus Power, MPL-B430P-MJ72AA X Axis, MPL-B330P-MJ74AA Z axis) The issue that I ran into was an accidental download of the program without activating the e-stop and the vertical axis dropped unexpectedly when entering program mode on the processor. I am aware that this instance was my fault as the programmer, however I am also concerned that this might occur again in the future if the controller ever enters fault mode or someone else completes a download. I have done some investigation with the "ProgrammedStopMode" parameter on this single motion axis and attempted all 5 options and the vertical axis still has a free fall drop for a second before the brake grabs hold - so evidently this is not working for me. (Page 24 of Vertical Load/Holding Brake manual - https://literature.rockwellautomatio...t003_-en-p.pdf) I am curious if there needs to be something done elsewhere as the X and Z axis are set up as coordinated axis? I also am unaware if I need to preform some action/parameter with the bus power supply for this? The current state of the machine as it sits now is preforming a MSF in manual mode after 5 seconds of inactivity or 30 seconds in auto mode. This axis is usually in demand every ~22 seconds. This will shut down the axis after preforming a brake test on the vertical load and seems to function OK, however it is still in the back of my mind the issues mentioned previously if we ever enter a controller fault while indexing. Thanks for your insight
-
I need a Red Lion HMI to communicate with an IO module (8) IO's ... I don't really need a PLC. Because the control of a certain LinMot drive for a linear motor can be activated by IO's. This LinMot drive can store up to 100 curves... which can simply be called into operation by a single binary number between 0 & 255, defined by eight IO's .. you input the number on the HMI, the HMI converts to binary and set the (8) IO's in the module which sends the binary number to the LinMot drive.. Yes, there are some other IO's for starting and stopping ... and it may be unrealistic for me to not use a PLC. I'm trying to get the cost way down... If a "stand-alone" IO module does not exist... then is there a simple, low budget PLC out there, with 8 or 16 IO's available..? Thanks much, Michael
-
Hello all, Thanks for the forum which has provided me with a lot of help overtime. I'm posting my first thread since I can't seem to find an answer to my issue. I'll quickly explain the situation: I'll be installing a RTD sensor to a GE Fanuc IC200ALG264 analog input module using a 4-20mA converter. Everything is fine except I can't seem to understand the polarities of the Fanuc inputs. I'll explain better: the module has an IC200CHS022 for the terminals, 15 terminals total, and the manual is reporting a "number" and a "connection" for each terminal. Now, the "number" seems to correspond to the visible pin of the terminal. But the positive and negative symbols are represented on the "connection", which I can't seem to wrap my head around what it means. Attached are abstracts from the manual and a photo of the terminals. Please tell me where to connect positive and negative outputs of the 4-20mA converter. Thank you. Terminals Table Terminals drawing Terminals photo (front)
-
PLC doesn't respond to communication requests or responds negatively to such requests. A PLC communication error can occur between the programmable computer and the devices it controls or when the technician attempts to program the device. If anybody have idea then share i am fresher now i learn it from CETPA INFOTECH. I think this is the best place to ask.
-
Hi all! We have a problem with a Mitsubishi system. After switch off the machine in home position and back on, it resets the servo encoder value to 0. I checked the servo parameters, and the Absolute encoder is enabled, the ext. battery is ok and no zero reseting in the program ( I think...). Is there a parameter I should check or some setting in the intelligent module? The system consists Q01CPU, QD77MS2 im., J4 200B amp with 6v battery, and HG-SR152 motor.
-
I'm using simple function block, one input and one output, like in this example: Problem I have is how to call function block and use inverted (NOT) value , ie instead 5.01 I need to use NOT (5.01) . Of course I could create new symbols that are inverted values of actual inputs but i'm trying to avoid that, number of addresses is significant.
-
To calculate a walking or moving average I want to use WSFT and SUM in a function block. Does anybody have experience with this? The idea is to take a 1 hour average of a proces value and store this average value each hour. The software then have to calculate the walking or moving average over say 4 hours or 12 hours with a maxium of 24 hours. See attached files with logic but then not in a function block Walking_AVG.cxp Walking_AVG.opt Walking_AVG.bak
