Search the Community

Showing results for tags 'panel view 1000'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 70 results

  1. Hello good day ! I have a problem with a Panel View 1000 plus, I accidentally connected this device to 240V and the rv2 of the circuitry has burned. I am not sure what reference this device is but I need to change it as soon as possible, I would appreciate it if you could help me! Thank you
  2. Hello,I am sizing a feeder circuit for a panel according to UL 508A and came into a question:My input current is of 76.5 A (considering all the loads), thus, it is fine for me to use a cable of 4 AWG (max. 85A @ 75 c).For the circuit breaker I did 76.5 A x 1.25 = 96 A and then I selected a breaker of 100A.My question is: Is it ok for me to keep this configuration according to UL 508A? 100A breaker + 4 AWG load side cableOr do I need to level up the cables?Thank you very much in advance!
  3. Does anyone have the User Manual for the Modicon Plus 1000? Trying to program a "ReadOut" template to show the value of a PLC-5 Integer file. Keeps saying that the "N" is not a valid file type. I've done this on the Cutler-Hammer PM1000. The Modicon will not allow the C-H program to download, says it's not a C-H product. Thankx in advance for any help
  4. B&R Power Panel 100 calibration

    Good day! Please tell me the options for calibrating the touchscreen of the B & R Power Panel 100 4PP120.1043-31 Rev.K0 without BIOS. After the damage, the touch screen managed to calibrate. After replacing the touchscreen with a new serviceable one, it is impossible to "push" the buttons - you need to start above the button, off-screen. There is no project source. A faulty touchscreen also fails to do a calibration. Can I reset the default calibration settings? Where is the calibration table stored? Is there a way to immediately call calibration after power on? I would be very grateful for any ideas!
  5. Hi all, Does anybody have experienced problem with communication while connecting  32k and 16k plcs to same SCADA via factory talk linx?   Does anybody have got problem with communication while RSView32 and FTView were used simultaneously with same plcs in different pcs with different shortcut names?
  6. Small and newly started Controls Company available to provide service in the following areas: Controls Design Panel Building PLC and HMI programming Commissioning Services 15+ years in controls and automation ranging from automotive to material handling.   Experienced with Rockwell and OMRON Can ship panels to anywhere in the world from Canada Will design and or build your panels to your specs and according to CEC and NEC regulations. Can commission your machines on site. www.ashtoncontrols.ca    
  7. Good Evening, wanted to introduce myself. I've been in the Electrical, Instrumentation and Controls field for 25 years. I'm looking for opportunities to build control panels, any info will help.
  8. Hello I would like to first let everyone know I am new to the world of troubleshooting or programming plc's . What we have is a SLC500 system that is connected to a Panelview 1000 HMI via the DH+ network. The issue we have is the panelview displays a gate that is suppose to be closed at as gate fault. When i connect to the plc the ladder rung shows that the gate is closed. To show various positions of the gate the programmer used N13:70 as gate opened and N13:71 as gate faulted and N13:72 as gate closed. When i checked the logic it showed the bit N13:72 as engaged or true if you will. This logic is in the ladder rung that is labeled PV Status which i take is the status the HMI reads so my question is why does it show GF when it should be reading GC. Ive searched all through the logic and it doesnt appear to be wrong here is the logic the best I can simulate it  ladder 6 rung  53  instruction is  XIC O:13.0/11 and OTE N13:76/0 (Gate Open ) and the branch is XIC I:5.0/11and OTE N13:76/1 (Gate Fault) next branch is XIC N13:3/11 and OTE N13:76/2 (Gate Closed which this section is green or highlighted or true which ever you like) when i looked at the input XIC N13:3/11 this is what I found is that this XIC is on ladder four rung10 and has the following XIC T4:154/DN and branchoff that is XIC I:5.0/11(gate opened)XIC I:6.0/11(gate closed) which these two inputs are false or not lighted the output is OTL N13:3/11 and it is true which makes the previous rung true showing the gate closed. So why is the panelview showing the wrong position. I even went as far as resetting the HMI and the PLC so if anyone has a helpful hint I would greatly appreciate it.
  9. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  10. Factory Talk Linx 6.0

      Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  11. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  12. mitsubishi nexgenie plc target settings View File This target setting files are used with codesys software for programming mitsubishi nexgeine PLC series,    Submitter lionheart86 Submitted 01/18/17 Category Demo Software
  13. Does anyone know a way to convert GOT 2000 screens to a GOT 1000? 
  14. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.
  15. Deif AGI400

    Hello, Is there anyone here that use or have used the AGI400 series of HMI from Deif ? Would like some input before I buy one for testing. Price seems quite ok, and the design isn't the ugliest one either. Pros and cons please !!
  16. Cable pin configuration required.

    Required cable PIN configuration for Nexgen 1000 series PLC, MS-40M-E, NT11-SF121B-EV1 , GT1020-LBD.  
  17. Dear all, i have using nexgenie 1000 cpu for my new project. but i am not able to connect with codesys v2.3 . I have installed target file T1.4 and T2.4. trie with both. Now i have doubt with communication cable. I have used standard RS232 Cable with 5and 8 Pin short. Kindly suggest the correct one. Thanks in advance
  18. I'm looking for a cheap solution to have a little HMI display connected to a Control Logix PLC through Ethernet.  The HMI is for a remote offloading station and there is little to display or control as the hardwired controls are already in place. The display would be mostly to indicate if the offload pumps were inhibited or not and which alarms that affected the pumps were active.  My problem is that Rockwell discontinued their mini displays or will during this year (this is for an external application) and the HMI's available that are tiny seem to be "locked" into Compactlogix or the Micro800 series.  Any advice on brands that would do such a device?
  19. We have an auto-clave unit purchased at auction roughly 4 years ago.   CompactLogix L32e and PanelView Plus 1000.  All has been working for us until last week.  Suddenly, the program seems to freeze up after around 30 seconds.  I can still touch the panelview and the touches are registered, (the mouse icon moves) but the program does not respond and I can tell the program is frozen because the clock which displays seconds stops counting. When i boot into safe mode (clicking white box on boot) the system does not seem to freeze at all.  I am able to navigate those menus w/o issue.  We don't have any of the software to connect to the PLC.  I understand this is a somewhat broad issue, but does anyone have any idease where i can start in troubleshooting this? or is their any further info i can provide which would be helpful?
  20. Jawest is OEM/ODM for Industrial panel PC, industrial monitor. Our Rugged panel PC is specially designed for industrial needs. First-class design, rational construction and metal material panel, ensure solid and shock resistance. It’s widely used in military, electric power, industrial auto equipment, manufacturing and weather station etc.  More info visit http://www.szjawest.cn/index.php/products.html   Low Power Mini Embedded Box PC   •  Enclosed dust-proof,anti-corrosion,anti-vibration,Electromagnetic compatibility and high anti-interference ability. •  high reliability, continuous production,decreasing failure rate. •  The motherboard adopts unique design,(watchdog),remote wakening,automatic reset. •  Aluminum alloy materials, drawing process,heat dissipation. •  Fanless ,noiseless,Silent use is more reassuring. •  Working temperature:-20~65°,working by 365*24H with all-weather. •  Fast Network Connecting: Wireless & Wired Gigabit Lan. •  Support Industry Standard Software, compatible with Win7\8\10 and Linux. •  Expandeddisplay for Multi-task ; Electricity Boot. •  Graphics Processing Ability: Clearer Quality Image and full color. •  Strong sutable with surrounding(temperature/humidity)cold,hot,humid,outdoor,voltage instability.
  21. I got into a project were they have 20 panelviews plus 1500 around the building, and they want to be able to serrate the displays accessible by the users based on the physical location of the panelview, for example Room1 should not see room2 but can see room3, at this moment we have a complete application with all the screens that have been downloaded to all panelviews, in order to avoid maintain 20 different ME applications I would like to ask if any of you had this problem before or any ideas on how to go forward with it.   Thanks
  22. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  23. How to connect Micrologix 1000 With Weintek MT6070ip HMI? i Can't connect my Allen Bradley Micrologix 1000 With Weintek HMI...
  24. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard
  25. Is there a possiblity to retrive password from mer file? I wanted to restore mer to runtime with local directory and its asking me for password that i don't have.  Could some one help?