Search the Community

Showing results for tags 'panel view'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 58 results

  1. Control Panel

    Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software?  I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously.  Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
  2. Hello, I have a .PBW file in an obsolete PanelView that I need to troubleshoot, but I can't open it.  Called AB TechConnect for support, but tech said it was too archaic and he, essentially, needed to start with a Windows98 machine and PanelBuilder 32 to even begin.  FactoryTalk doesn't know what to do with it.  File is attached.  Any suggestions/assistance is much appreciated ABWWTP.PBW
  3. Control Panel Drawings

    Gentlemen and Ladies,                             This post might come off as generally lazy but this is purely in the interest of saving time. Our company has been building control panels for quite some time. I have been doing the design for about 10 years or so. We typically build Allen Bradley type control panels. Our main customers are water/wastewater so they are typically Compactlogix with basic IO. (AI, AO, DI, DO) modules. Recently i've been using the IO Wiring System modules. These save an incredible amount of time. However, they are quite big and require a decent amount of space. Our smallest control panel size is usually 36x36 and that is pretty tight. My question to all is, does anyone have a set of control panel drawings for an Allen Bradley compact logix system without these wiring modules? I am looking to create a smaller control panel, and I just haven't had much time lately to sit down and do the design. This is indeed a shortcut, but time has been limited on my end as of late. I apologize if this is out of line.   Thank you,  
  4. Hello good day ! I have a problem with a Panel View 1000 plus, I accidentally connected this device to 240V and the rv2 of the circuitry has burned. I am not sure what reference this device is but I need to change it as soon as possible, I would appreciate it if you could help me! Thank you
  5. Hello,I am sizing a feeder circuit for a panel according to UL 508A and came into a question:My input current is of 76.5 A (considering all the loads), thus, it is fine for me to use a cable of 4 AWG (max. 85A @ 75 c).For the circuit breaker I did 76.5 A x 1.25 = 96 A and then I selected a breaker of 100A.My question is: Is it ok for me to keep this configuration according to UL 508A? 100A breaker + 4 AWG load side cableOr do I need to level up the cables?Thank you very much in advance!
  6. B&R Power Panel 100 calibration

    Good day! Please tell me the options for calibrating the touchscreen of the B & R Power Panel 100 4PP120.1043-31 Rev.K0 without BIOS. After the damage, the touch screen managed to calibrate. After replacing the touchscreen with a new serviceable one, it is impossible to "push" the buttons - you need to start above the button, off-screen. There is no project source. A faulty touchscreen also fails to do a calibration. Can I reset the default calibration settings? Where is the calibration table stored? Is there a way to immediately call calibration after power on? I would be very grateful for any ideas!
  7. Hi all, Does anybody have experienced problem with communication while connecting  32k and 16k plcs to same SCADA via factory talk linx?   Does anybody have got problem with communication while RSView32 and FTView were used simultaneously with same plcs in different pcs with different shortcut names?
  8. Small and newly started Controls Company available to provide service in the following areas: Controls Design Panel Building PLC and HMI programming Commissioning Services 15+ years in controls and automation ranging from automotive to material handling.   Experienced with Rockwell and OMRON Can ship panels to anywhere in the world from Canada Will design and or build your panels to your specs and according to CEC and NEC regulations. Can commission your machines on site. www.ashtoncontrols.ca    
  9. Good Evening, wanted to introduce myself. I've been in the Electrical, Instrumentation and Controls field for 25 years. I'm looking for opportunities to build control panels, any info will help.
  10. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  11. Factory Talk Linx 6.0

      Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  12. Good day, I would like to extract the FT View SE Alarm Log. We currently have got a Excel spreadsheet set up with a connection to the FTAE SQL Database.  When I refresh the data, Excel give an error telling me that the data is more than what can be displayed in a spreadsheet. So it then discards the latest data. I have tried setting a database limit in the Factory Talk Administration console to only keep the last 60 days worth of data but it does not seem to take effect. I get data from January 2017 up to 15 October 2018. Is there a way to configure the ODBC connection in excel to only give me the data for the last 30 days or is there someone that can help me to limit the size of the database? I have attached the current connection config.
  13. I am starting my own consulting business, so put my experience and technical know-how to work and ensure the success of your process control projects.  No project is too small!  I hold a Bachelor’s of Science in Electrical Engineering from The University of Arkansas, and obtained an Arkansas PE license in 2014.  After working for a Generation and Transmission company as a power plant controls engineer, I have decided to put my skills and experience to work as an independent consultant.  My SCADA/HMI experience includes GE’s Proficy Cimplicity software, and Rockwell Automation FactoryTalk View SE.  I also have experience programming controllers using GE’s Proficy Machine Edition, Rockwell Automation Studio 5000 and RS Logix, and Emerson Delta V. Check out my LinkedIn profile at https://www.linkedin.com/in/trevormarmstrong for more details regarding my experience and past projects. Contact me through these forums, LinkedIn, or via email at tmarmst@gmail.com any time for more information on my services or availability.
  14. Deif AGI400

    Hello, Is there anyone here that use or have used the AGI400 series of HMI from Deif ? Would like some input before I buy one for testing. Price seems quite ok, and the design isn't the ugliest one either. Pros and cons please !!
  15. I'm looking for a cheap solution to have a little HMI display connected to a Control Logix PLC through Ethernet.  The HMI is for a remote offloading station and there is little to display or control as the hardwired controls are already in place. The display would be mostly to indicate if the offload pumps were inhibited or not and which alarms that affected the pumps were active.  My problem is that Rockwell discontinued their mini displays or will during this year (this is for an external application) and the HMI's available that are tiny seem to be "locked" into Compactlogix or the Micro800 series.  Any advice on brands that would do such a device?
  16. We have an auto-clave unit purchased at auction roughly 4 years ago.   CompactLogix L32e and PanelView Plus 1000.  All has been working for us until last week.  Suddenly, the program seems to freeze up after around 30 seconds.  I can still touch the panelview and the touches are registered, (the mouse icon moves) but the program does not respond and I can tell the program is frozen because the clock which displays seconds stops counting. When i boot into safe mode (clicking white box on boot) the system does not seem to freeze at all.  I am able to navigate those menus w/o issue.  We don't have any of the software to connect to the PLC.  I understand this is a somewhat broad issue, but does anyone have any idease where i can start in troubleshooting this? or is their any further info i can provide which would be helpful?
  17. Jawest is OEM/ODM for Industrial panel PC, industrial monitor. Our Rugged panel PC is specially designed for industrial needs. First-class design, rational construction and metal material panel, ensure solid and shock resistance. It’s widely used in military, electric power, industrial auto equipment, manufacturing and weather station etc.  More info visit http://www.szjawest.cn/index.php/products.html   Low Power Mini Embedded Box PC   •  Enclosed dust-proof,anti-corrosion,anti-vibration,Electromagnetic compatibility and high anti-interference ability. •  high reliability, continuous production,decreasing failure rate. •  The motherboard adopts unique design,(watchdog),remote wakening,automatic reset. •  Aluminum alloy materials, drawing process,heat dissipation. •  Fanless ,noiseless,Silent use is more reassuring. •  Working temperature:-20~65°,working by 365*24H with all-weather. •  Fast Network Connecting: Wireless & Wired Gigabit Lan. •  Support Industry Standard Software, compatible with Win7\8\10 and Linux. •  Expandeddisplay for Multi-task ; Electricity Boot. •  Graphics Processing Ability: Clearer Quality Image and full color. •  Strong sutable with surrounding(temperature/humidity)cold,hot,humid,outdoor,voltage instability.
  18. I got into a project were they have 20 panelviews plus 1500 around the building, and they want to be able to serrate the displays accessible by the users based on the physical location of the panelview, for example Room1 should not see room2 but can see room3, at this moment we have a complete application with all the screens that have been downloaded to all panelviews, in order to avoid maintain 20 different ME applications I would like to ask if any of you had this problem before or any ideas on how to go forward with it.   Thanks
  19. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  20. Hey, this is probably a stupid question, but how do I delete old FactoryTalk View Programs. They are the ones that I have uploaded from a PanelView Plus via the "Transfer Utility" and then restored runtime using the "Application Manager". I open up FactoryTalk View Studio and I can see a list of all the runtime applications or I can create a new one. My question is, where are these applications stored by default? I have a bunch of old ones and test programs that I want to delete that are just cluttering up my list. I attached a screenshot to show you exactly what I'm talking about. Thanks, I'm sure this is a pretty easy/ dumb question. Howard
  21. Is there a possiblity to retrive password from mer file? I wanted to restore mer to runtime with local directory and its asking me for password that i don't have.  Could some one help?  
  22. I'm making this thread, continuing from my previous one (Newbie Screwed Up) where I received tremendous help from those on this forum.    I now have the AB 5/04 working, but the Panel Mate 1700 doesn't seem to communicate with the 504.  The HMI connected to this brick is a Cutler Hammer Panel Mate Pro 1700.  It lights up,  the touch-screen buttons somewhat react to touching (might take a few strokes to react), but the functions do not react with the 5/04.  I called the equipment manufacturer, and they basically said it is all obsolete equipment, no longer supported, etc. and we are SOL. But, for a mere $100K, we can send the unit back, and they'll install all "modern" control units !! Not an option.   I get it that the unit is 10+ years old, but has very low cycle times on it.  (maybe 400 hrs)   It's my understanding that the  HMIs are just that....a means of the operators telling the PLC what you want it to do. So, my question .... is there an off the shelf software package that would emulate the Panel Mate 1700?  All I need to "control"  is to advance or retard two sets of heat seal rollers (via PacSci stepper motors), actuate two separate hole punch solenoids, and an air solenoid for a knife....it's basically a packaging machine.  I do have a program called PMConfig , but I don't see any communications buttons or icons in that software, just screen shots of what shows up on the HMI, icon selection, change fonts / colors, etc.  So, I'm looking for a resolution to make new(er) HMI (or even just a cheap a$$ laptop)  with affordable software, and easy interface to communicate with the now functioning 5/04.  Thanks for the input.
  23. Hello I downloaded a .mer file on the Panel view 1000 but it shows errors on the display graphics. i have configured the Rslinx communication several times by selecting the rigt PLC in Design and Runtime mode. I am using Facotry Talk view 8.20 and creating 5.10 runtime file. Please advice. I was able to correctly download and use the HMI on a similar machine. I dont know what am I missing on this one.    Thanks Pratik Jain
  24. Indirect Addressing NA Terminal

    Hi. ¿Is there a way to use indirect addressing on a NA Panel?  I need to use a motor operation template for several motors and i think is not very smart doing the same panel over and over. I have always created a screen and then reused it (on FactoryTalk View, Intouch, Schneider Vijeo) The problem is that we don't find any article about indirect addressing on NA panels. So we dont know how to do it. On CXDesigner we used DM addressing so we could use a template instead of creating many button panels when we need to operate a motor, for example. Its like when you use indirect tags on Intouch or Parameter files on FTV. I fear that indirect Addressing is not possible, but in that case ¿Which method do you recommend? ¿Got an example or an article mentioning it? Thanks in advance.
  25. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached