Search the Community

Showing results for tags 'omron error'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 620 results

  1. Hi, I'm new to the Omron PLC, we have a job that require we change the balluff master port from IO link to Stander IO output, i read some resource online saying that it has to be done though the cx configurator, i followed the instruction and tried to remove the module connection from the cx configurator and change the parameter and add it again. during this sequence i encounter some problem, the IO size for balluff master module is 392byte input and 262byte output, i've tried to add input though D17350 and output though D17550, i was only able to add one of them successfully, when going to the other one the softerware came  up with a error saying the it exceed the total tag size that the device supported, i tried to decrease the tag size but it would now match the device IO size when i tried to register it. all i need is to change the module's function from IO link to stander IO, hope someone has experience in these area can provide me some help Thanks     
  2. Q-Series - Operation Error 4100

    Hi guys. I found error on PLC and from PLC diagnostic I found this Operation Error 4100 as per attach picture. FYI, there is no SD card mount onto this PLC. I wonder what is ATA card. This error wont affect the operation. Any advise on what to check?   This ladder is pop up when I clicked, error jump.   Thanks.
  3. Lately I have been having a struggle importing tags into JMobile from a CJ2M CPU31, I can enter tags directly and it works OK, but when I try to import tags nothing works, there are the yellow triangles on all the widgets. I tried to import using the "normal" Ethernet protocol by first making a .CXR file from the global symbol list, it seems to create the dictionary, and I can update the taglist and the tags appear to have the correct datatype and address, but no joy. I also tried the EthernetIP protocol by making a cjf file, funny thing is that worked for a while, but stopped communicating after a while. I have successfully used the EthernetIP import on another  CJ2M/Exor eSmart. Any way of troubleshooting this, adding 50+ tags by hand is not very tempting :( Geir
  4. A2SHcpu ROM Error Code 17

    Working with A2SHcpu and something went wrong. Cleared PLC memory and I have an error code 17 (ROM). I don't know how to clear this. I have tried creating a new project and parameters but when I try downloading parameters only it gets to about 13% then says complete. When I read the parameters back from the PLC they have not changed and are still at factory default. There is no memory card that I can see in the processor. Any help or guidance would be much appreciated.
  5. I've setup an Omron NX102 PLC with two CIF105 cards communicating with about 40 MX2 VSD's (20 on each card). Generally it works pretty well. I used the attached document to set up the devices. The links on the document to the examples don't work, so I'm unsure if I missed anything. My problem is that every day, sometimes multiple times a day the communication seems to die. i.e I either loose the output to the VSD and nothing will run. Or it all runs but I loose the feedback, as in I get no running signal even though the drives are running causing a fault in my program. I'm at a bit of a loss as to what might be causing the issue. To resolve it, I put the PLC into program mode and back into run mode and everything is happy again.    Has anyone had a similar issue or offer any advise? MX2_Control_Serial.pdf
  6. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  7. Hi Everyone,I have a customer that needs a CQM1H (CPU51) replaced. They purchased the processor new-old-stock from a source they found online. It arrived in the original packaging and had the safety label around the top of the unit, so it seems that it is as advertised and no need to suspect that it would have problems. I purchased secondhand, a power supply to attach to it and program it from the bench instead of in the machine. The customer also provided me with an SD card containing the project file(s) for the machine. I am able to load the project in CX-ONE (running on Win 7) just fine. My computer has a native serial port (COM1) and I built a programming cable to work with the DB9 peripheral port according to a diagram I found online.The processor powers up right away with the ERR/ALM continuously on. No other LEDs came on initially, and after a bit of playing around with communications settings, I finally landed the right protocol and my computer seemed to identify the processor correctly. I compiled the source and attempted a transfer to the PLC. I got some failed message (or maybe messages) at the end of the transfer. It did seem to send all of the binary code, it just ended with an error message that I unfortunately didn't write down or grab a screenshot.Anyway, what I have now is a PLC processor with the ERR/ALM LED on always, I've never seen it in RUN mode, and now after the programming attempt, I'm seeing the COMM LED strobing at about a .5sec frequency (with or without a cable attached to the peripheral port), AND I cannot get CX-Programmer to again acknowledge the processor anymore. I'd like to reset this back to the way it arrived to me, but can't figure out how to make that happen offline. The DIP switches don't seem to cause that effect. I should say also that the DIP switch settings are all OFF except 3 and 7.Any help is much appreciated!Thanks,John  
  8. hello, anyone. I want to ask about file which is I cant open. I was uploding HMI NB series but the file is only .pkg and when I decompile, it cant be done/ failed.. can anybody help me and explaine how is it can be? I use NB3Q-TW01B. thank you.
  9. Hi there!   I'm trying to communicate a Weintek cMT2128X with a CP2EN via Ethernet. The thing is I'm getting 'No device response' messages every 2-3 seconds. They'are connected at some point because some values are updated, but the connection error keeps showing up. So far I've checked: - Comm. settings are okay in both sides - Wiring is good - Happens the same with a CJ2 CPU. - There are two arrays of 50 UINT each, I don't know if that's slowing things but that would surprise me...   I've worked with Weintek HMIs before (communicating with different CPUs: LOGO!, CP1, CJ2...) and never had this problem. I just set the IP addresses and everything was working fine, so I guess I'm missing something. Hope you can throw some light at this! Thanks in advance
  10. Hi all and good day, I'm working through my workflows with Sysmac studio.  I think I have a grasp on the PLC side, now I'm trying to foucs on the HMI side.  I have setup some data types on the PLC to store booleans, integers, etc. I am trying to pull the data from those data structures into a value display on the HMI however it is being most difficult.  This brought me to two immediate questions. 1. Can you display the value of a local variable on the PLC from the HMI or does it need to be a Global variable?  I'm familiar with Java so I do understand the concept of public versus private variables.  I'm just not sure if that is what is going on here or if I am just not querying the variable correctly.  2. How would you go about setting up a variable display of a variable that is part of a data structure?  I have my structure setup as well as the variable in the table to USE that data type however it is just giving me an error when trying to look at it from the HMI. Any help would be very much appreciated.  My apologies in advance if this is a repetitive question. Thanks, Red
  11. Hi   I want to look into a program i recieved, but i get this error when trying to open it. Im running the 30day trial atm, but i got the same error when I ran the 1.45 version earlier.   Never used sysmac before, so if anyone has a tip, it would be nice
  12. How to count to 120000

    I’m using a Omron CJ plc. I have a press that I need to count the shots up to 120000. I know that the. CNTRX is limited. So does anyone have an example of how to set this up? 
  13. Hi all , I have been using MELSEC - Q series plc for the past two project i dont find any issue with that but for the third project  used same PLC same model but there is issue which I found unable to resolve  The issue is when i try to communicate PLC using LAN cable by direct ethernet connection it works normally but by communicating using HUB network I cannot communicate, I checked all the parameters setting, I dont know what is the issue even contacted mitshubshi service to troubleshoot but they are not responding  So here i am for your guidence to solve this issue   see the images below to analyse this issue This connection is direct ethernet connection which works normally    The parameters are set and writed to PLC The IP is set to my PC for communication  When i try to find the cpu in the network it shows the cpu IP  After that I checked for connection Test it show error I have also attached the Network route which i used to communicate  Network Drawing.pdf I hope someone will help me to solve this issue Thank you , madhan ravichandran
  14. Hi all, I have an issue with Mitsubishi GOT Simple Series. After write to GOT, everything okay. All the hmi button functioning well. But after turn off and on the hmi, It will appear "SCREEN ERROR".  Any idea what can I check? 
  15. Hello,   I hope somebody can help me give me hint on where I could look. I do have an MAM command that is throwing error 11. "At least one axis is not configured to a physical motion module ora has not been assigned to a Motion Group." The error message itself is clear but the Servo is running flawless until it suddendly stops doing this (the customer states that it mostly happens after an EStop). The EStop is hardwired via the STO inputs and those are active while the error is shown. So far the only way to reset the error is to shutdown the machine and power it up again. I can't find any errors in the error logs that would hint to dig deeper. Has anyone had this error or knows how to solve this?   PLC: CompactLogix 5370 Servo: Kinetix 5500
  16. Mewnet RS232c

    I wanted to online in FPWIN GR7s to FP-X C30t but it show MEWNET device
  17. Hello, I have problem with Import and Export data from PLC to USB drivers. I want to write script in Subroutine and I have working script in VB language from the Tia portal, Script is in the attachment but when I want to copy the script to Sysmac it gives many errors. Please give me some advice, how to write such a script.       CsvToDB.txt DbToCsv.txt
  18. Good afternoon, I've done a bit of research in regards to running a Zebra printer via ethernet from an Omron PLC but there's not much info out there. Has anyone had much success printing barcodes to a Zebra printer from PLC via ethernet? I'm using an Omron NA5 (HMI) which I've designed to displays 12 different buttons indicating different barcodes, but I'm unsure how to link these buttons to the specific barcode files that I've created in Zebra Designer.. Would anyone know how I might be able to accomplish this?
  19. Good morning, I'd like to start by saying that I am new to programming, so please bare with my very simple questions. I'm having issues trying to get a DataLamp on the HMI screen to change its behavior from lamp Off to lamp On after a specific process has been completed (not operated by a button). Is this possible or do lamps strictly operate by using a Button?
  20. Hi We are searching for a EtherCAT splitbox with safe digital inputs that is compatible with Omron NX. for a example a hardware like this one https://www.beckhoff.com/en-en/products/automation/twinsafe/twinsafe-hardware/ep1908-0002.html has anyone successfully connected this type of hardware to the omron ethercat network ?    /Best Regards 
  21. Hello,   Seeking for your help on my load cell module RS1201, I am having trouble on how to activate the Ch1_One_touch_Tare_Subtraction_Execution. I have used it on my HMI using that address for tare, upon pressing the momentary button the value would change to zero. But if I release the button, the value would turn back to it's initial value before pressing the Tare Button. How will I be able to zero it? Thank you for any suggestion you may give. 
  22. GOT2000_Comset & GOT2000_Slave

    GOT2000_NG_1000.lib NOT FOUND HOW TO SOLVE THIS ? PLEASE HELP.
  23. Hi All, I'm looking to setup communications between a digital force gauge and an Omron NX-CIF1010 RS232 serial communication interface.  Here is the Output Protocol from the Force Gauges Manual: Output Protocol RS-232 Parameter - Baudrate: 9600 - Data-Bit: 8 - Parity: none - Stop-bit: 1 The measured value is requested by the PC by the ASCII Sign “9”. I've tried to follow the youtube video, "How to communicate via RS 232 using an NX CIF to a PC" however setting up communication between the force gauge instead of a PC is proving difficult. How to communicate via RS 232 using an NX CIF to a PC - YouTube This is quite new to me so I'm trying to get my head around it at the moment so please correct me if I'm wrong. I'm reading values from the Force gauge in ASCII and I need to convert those values into another numerical value data type. I've seen in CX-Programmer, ASCII values being converted into Floating Point values using the "FVAL" instruction using Data registers however I can't use the same approach in Sysmac Studio. Do I need to clear the serial buffer everytime before I look to receive a numerical value from the force gauge? Here are details regarding the screenshots I've included below: 1) CIF101 Parameters to read Force Gauge Output Protcol in Sysmac Studio which should be matching the force gauges output protocol. 2) CIF101 IO Map in Sysmac Studio - ** I'm unsure if this is where I need to be linking the "RcvDat" input of the "NX_SerialRcv" function block? 3) CIF101 Sending Data Function Block - "NX_SerialBufClear" function block setup - "port_id" data type has been changed to "_sDevice_Port". 4) CIF101 Receiving Data Function Block - "NX_SerialRcv" function block setup 5) Global Variable - Array [0..3] OF BYTE - used in "RcvDat" input of "NX_SerialRcv" function block  6) Internal Variables Created  to send and receive data 7) Force Gauge RS232 Configuration 8) Force Gauge Output Protocol   Any help would be greatly appreciated. Paul  
  24. NMEA to CJ1M

    Hi there,    I need your help. I need to gather NMEA data to my cpu.  Whats the proper way to do it? I mean set serial port of cj and then to read ascii characters ?  
  25. Hi, Is there a way to write an Event Name to a string variable in Sysmac Studio? I'm using a NJ-301. My problem is that I can detect that there is an error and get the Error Code using functions GetECError, GetMCError, GetPLCError, etc, but I want to get the Event Name associated with the code (in a string variable), to display that string on an HMI (not from Omron). Is this possible?