Search the Community
Showing results for tags 'omron cj2m vb javascript fins ethernet/ip'.
Found 760 results
-
Hi, I am new in working with Omron PLC. I would like to know if there is a way to simulate an OMRON FINS SERVER to test a desktop application for simple command like READ_MEMORY_AREA, READ_CLOCK... I try to use CX-simulator but i'dont know how to connect it to my application. Thank you for your advice.
-
Hello Everyone, This is first time i am using Omron's CX-Programmer. PLC- CP1L-EM40DT1-D I have 2 built in analog input of 0-10V on PLC Board. I want to know the default resolution, Data Type and Register address to detect analog Input for my further programming. Please Help me with these...
-
Hola buenos dias quisiera pedirles de su ayuda estoy intentando establecer la comunicacion por el modulo cif11 modbus 485 el plc es omron cp1h con un esclavo que es un variador delta ,pero el tema es que no puedo comuncarme alguien que haya hecho ya, en la configuracion solo me da el puerto de enlace serial HOST LINK y otros pero por el manual te dice que es por el puerto de enlace serial, alguien que lo haya hecho seria de gran ayuda. saludos.
-
Hi to everybody. I'm beginner on Beckhoff so I'm having issues with connecting Beckhoff CX8090 and Weintek EMT3070a. I'm trying to use Beckhoff TwinCAT PLC Free Tag names to get data from CX8090. I have followed instructions in EasyBuilderPro which are pretty straightforward. On side of HMI I need to select proper settings which should be: IP: 192.168.1.2, Port no.: 48898, ADS port: 801, AMS NetID: 192.168.1.2.1.1 I have succesfully imported all variables from my PLC program into the EasyBuilderPro. For testing I tried to create HMI just to see status of few inputs. I have no issues uploading program to HMI, but after startup I get message Device no response and communication is not working. On side of Beckhoff I have settings like this: AMS NetID: 192.168.1.2.1.1 Ethernet port X001: DHCP Ethernet port X101/102: IP: 192.168.1.2 I can access to CX using input ports X101/102 and also access to HMI through same connection. I have also tried to log on to windows CE on CX and tried to ping HMI and that also went ok. Also I have tried to add static route on TwinCAT to HMI with settings AMS NetID:192.168.1.3, IP:192.168.1.3 but again no connection. So physical connections are CX8090 X101 - > HMI, CX8090 X102 -> PC. From PC I can access both devices. I'm using TwinCAT 2. Can you tell me what I'm doing wrong? Thank you
-
Hello, My previous topic was want to establish communication CP1E --> Videojeet Printer using RS232 serial cable. this project test SUCCESS. by the way distance from printer and PLC was very far almost 500meter. so printer technical team request to use tcp communication using cat5e cable. Problem: 1. I'm using TCP communication protocol that need me to have open,send,receive,close port. 2. Communication testing with PC Hyper Terminal --> OK but HT need in waiting call mode, i don't know why. 3. Using printer no result show. how i'm suppose to know communication already establish? 4. Communication setting on PLC Setting-Built in Enthernet need to add other communication device.? here i'm share some programs to give more understanding. Thanksm TCP with printer.cxp
-
RS 232C Serial Communication between Magelis HMIGXU3512 and Omron PLC CP1E
Klauzer posted a topic in CX-Programmer
Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems? -
I'm working on a project with Omron CP1E-N30DR-A Plc (And yes it does have the timeclock) And Omron NB7W-TW00B HMI I'm trying to use the Clock adjustment DATE(735) feature in the Plc program. In conjunction with the HMI to correct the time. Only focused on the Plc program for now. And presume I can accomplish the HMI portion once Plc program is working. Been fumbling with the Instruction manual descriptions several days and seems I'm not getting anywhere. Is there a possibilty to find an example program for this feature somewhere online? Or could someone possibly create an example program? I realize I might have missed some key information things in this topic. But lets see if I get any response at all.
-
Micrologix 1400 Lookup Table over Ethernet/IP
cekann posted a topic in Allen Bradley / Rockwell Automation
My project is to read an RFID tag (ascii) with a Micrologix 1400, send the string to a PC using Ethernet/IP, lookup and compare in an Excel spreadsheet, and send back data (probably an integer) for the plc to use to control direction. I have to scan and compare an RFID tag to a list of 1400 possible part numbers, at different locations (more than 1 plc). I want the several PLCs to go to a single PC to make it easy to update when changes occur (on a weekly basis). Has anyone done anything like this? I'm assuming there will have to be some kind of vb or c+ application involved. Thanks, CK -
Hello, From modbus, Im reading a HEX variable in the data register D0, as it is a 32 bit variable, the second part is saved in D1, then I get: D0: BE62 D1: 31D7 The value that I should obtain in float is -0.2208932 as I obtained setting BE6231D7 in online Hex to float converter and this agree with what I'm reading on the flowmeter. The problem is that when I try to change the data type from channel to Real on CX programmer I obtain a different value, also the registers are not sort in the proper way, instead they are sort inversely 31D7BE62, and obviusly the obtained value is completely different. Also instead of Hex, I want to display the decimal, or floating value, is there a way to do this? I'll attach some captures.
-
How to connect Mitsubishi PLC with QJ71EIP71 and SICK FLEXI soft Ethernet/IP
Wasan posted a topic in Mitsubishi
Hi everyone. I have project to use PLC Mitsubishi Q03UDECPU with QJ71EIP71 to connect with SICK FLEXI soft Ethernet/IP (FX0-GENT00030). I have check both manual but when I turn on Y0 (communication start) there are error code F100h on my QJ71EIP71 and I check that it can only use with produce/consume tag from PLC (such as OMRON, Allen Bradley) but for SICK device it can use only for assembly instance. Then I have use Ethernet/IP scanner (Molex) to read attribute (service code 72h) then I can read status from SICK but as I told before QJ71EIP71 can only communicate with tag-based. Then I have to ask everyone that 1. Are there method that can use QJ71EIP71 to communicate by use Assembly Instance? 2. Could I set consume tag name on FLEXI soft Designer? 3. Are there any protocol gateway device that match with these solutions? -
Configuring high speed counter card 1734-VHSC24/C with explicit messaging
Jiggadoo posted a topic in Allen Bradley / Rockwell Automation
Hello! I have a problem with Allen-Bradley High Speed Counter card 1734-VHSC24/C. I need to make changes to the configuration parameter .OnValue1 (DINT) during the system is running. Now, for changing the parameter value, I need to switch off the module and this can not be done during the line is running. I think that maybe this can be done using the explicit messaging. I could not find information for this from internet, so now I ask you to help me with this item. If anyone have experience or knowledge of this, please help me. I do no have experience using explicit messaging. My configuration: Studio 5000 Logix Designer V24.00, 1756-L71S V24.11, Ethernet/IP, 1734AENTR, 1734-VHSC24/C countermodule. -
Hello, I have been so many days trying to comunicate the multiway software trought a serial usb converter with the SCU31 device, using a omron function block to read a holding register, but I can't achieved it. Now Im receiving some frames on multiway, but there is always some errors. I was wondering if somebody in here that have worked previously with modbus and omron can be able to help me in how to configure everything corectly to be able to read the value from multiway, on the plc, and where is this value saved. I'll upload some captures to show what I have done till now.
-
Hi Dears, I have one heavy ethernet network I have 21 station PLC (S7 300) that each station have one server & I have one server that connected to all of this PLC in center. all servers are in one ethernet network I want to know that this configuration is ok? ethernet network can support these number of servers? or may be network fail?
-
Which is the best procedure to reset a SFC finite state machine
paulovedder posted a topic in CX-Programmer
Hello, One thing that I constantly find hard to do when I program in SFC is to properly reset a FSM. If something goes wrong during the process I like to be able to reset the program. In Ladder this is quite simple to accomplish. Usually, I have a variable (non volatile) which is responsible for the step transition. If I want to reset the FSM I just use the function MOV to disable every step variable, which turn off the entire FSM. If I want to restart the program I use the MOV function again to enable only the first step. So my question is: how can we accomplish that in a SFC program? Lets not consider the option of having a reset transition in each step... Best regards, Paulo -
Hi, I am trying to connect a new CJ2M-CPU31 to a used NS12-TS01B-V2 (it seems to be restored to default). I want to connect that using Ethernet. In the Cx-Designer I have set the following for the NS ethernet Port: - Ethernet: Enable - Net number: 1 - Node number: 5 - UDP Port: 9600 - IP address: 192.168.140.5 // 255.255.255.0 // 0.0.0.0 // 0.0.0.0 And the following for the host: - Name: CPU_A - Type: SYSMAC-CJ2 - Protocol: Ethernet/IP - IP Address: 192.168.140.10 In the Cx-Programmer I have set the same IP address for the PLC from the I/O table configuration. However, they are not connecting. After some seconds the HMI shows a Time-out Error. I am used to works with this kind of HMI, I think the problem is in the PLC because this is my first time working with a new, out of the box, PLC. I have tried to comunicate them using the "Com. Test" tool from the System Menus of the HMI; however, I didnt get it. I think the problem is than the integrated ethernet port of the PLC is not in the Net Number 1. I have tried to set it using Cx-Integrator. I have clicked in "Create routing tables" -> "Insert SIO CPU unit" for the Unit250(Integrated Ethernet Port) -> Local network number = 1 -> Transfer to PLC. Nevertheles, the windows "Online Connection Info" is allways showing Net(-) instead of Net(1): "Ethetnet [CJ2M-EIP21] Net(-), Node (10), Unit (0)" I have checked the Cx-Integrator Manual and says in this case it is only neccessary to "Connect", but I have tried it, waited for the 254 nodes, and... it doesn't work!! I don't know what to do! Thank you.
-
I have omron plc CJ2M CPU15 and I have input module CJ1W-MD261 (32 inputs, 32 outputs) and I was wondering can I MD261 module for hsc inputs? When I open CX programmer and go to settings and go to "IO Module" I see that I can include HSC input and I assigned it to Input 08 and what is that input? Is that input 0.08 on MD261 because my plc has no integrated inputs or outputs (image included at the bottom). Any help is wellcome
-
Hi I am trying to connect a Nachi MZ01 robot to a proface (LT400M) HMI/PLC, I cannot seem to get the communications fully working as I have a response error on the proface and a I/O error on the robot pendant, I also cannot find the assembly instance in the manual for the robot to set in the proface device setup, I am using 256 Bytes in inputs and outputs, I have attached the proface software below. J2204 - Welding Cell V2.prx
-
Hi all, I am trying to update the firmware of a NS12-TS01B-V2. I have downloaded the RecoverUpdate_8_95.exe (and someothers) from the myomron website. I have followed the instrucctions PDF, but when I switch on the HMI with the Compact Flash inserted, nothing happens: the screen is dark and the led is lit orange (not blinking). The compact flash is 1GB (not omron) and formated using a CJ2. I have been using this card in OMRON PLCs and HMIs for years without problems. I read in other topic than I guy had similar problems and he solved it using other computer and other unzipper program. I have tried it, but it did not work. After that, I tried to update it using the DIP switches, but I got more problems, because I got a Warning first, and later an Error, because I forced the installation of the Firmware of the NS8 (BANK1) instead of the NS12. However, the other BANK folder contains the FW for the NS5... Anyway, I could fix this error because previously I did a backup of the already installed system (V7.0). I would like to ask you to send me a BackUp of another NS12, using the "Manual Transfer", that should works. I need the 8.20 version or higher. Thanks a lot. My email is hector.moreno.lax@gmail.com
-
How do I edit an array size ARRAY[0..13] OF REAL to ARRAY[0..15] OF REAL? Sysmac Studio doesn't allow it to be done online, as far as I can see. If I do it offline and then go online and Synchronise, Transfer to Controller I receive error Any ideas?
-
Is it possible to view the values / states of all inputs, outputs and workbits (e.g. 64.00 through 64.15 on Omron CQM1 PLC) on a single screen or control panel within CX-Programmer software? I'm trying to troubleshoot some ladder logic that I wrote and need to know the values of 5 or 6 inputs/outputs/workbits simultaneously. Having to scroll up and down through my ladder logic repeatedly does not work well with code that changes state every 5-10 seconds or so. Any help is welcome.
-
Hello, I have a PLC NX102-9020 with an NX-CIF105 card. I need to communicate with 3 CQM1H, with Host Link protocol. Someone could tell me how to do it or if you have an example. The frames to send I already have defined and tested, I just need to implement it in the PLC. Sorry for the translation, it's done with Google. Thanks
-
Hi Omron Experts, I am connecting mitsubishi HMI with Omron nj101 plc via ethernet, pl tell how to connect tag data of Omron plc to the hmi
-
Trying to connect our old Sysmac C200HE PLC to the CX-Programmer software however, failed connection appears. We are using a USB-Serial connection and have set up the comms on the device manager. To try and connect to the PLC we are using the Auto connect function, selecting the usb-serial connection and selecting the comms the same as the host network. Any help would be greatly appreciated.
-
Hey guys I have searched the forum, but can not find the answer I am looking for. I have an Omron Nx102-9000 along with an NA5 (9 ") that I use to control an industrial furnace. I need to set an output one at a given time (date and time) A time that should be able to specified from day to day via the HMI Is there anyone who can help me? Then I would really appreciate it
-
Hi, I'm using a CJ2M CPU 33, and also a CJ1m Ad-041-V1 Analog Input and DA-041 Analog Output card. I am using the Analog input to measure my current in my one heating application and Ihave that reading and scaled correctly, but now I want to use my Analog output to replace the Rheostat we have in the system. I'm having some issues setting the range and getting voltage to vary. I also am a little new to Analog Outputs and don't know what I'm doing wrong. I have attached my program here. Any help would be greatly appreciated. Analog Heat.cxp
