Search the Community

Showing results for tags 'ntxs'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 3 results

  1. Hi Old NT2S-SF121B has a problem with key and we decided to exchange to new NT2S-SF121B. With old HMI I could only connect via software NT 2ST ver 1.3C and I was able to upload application. Using NTXS ver 1.04 I couldn't connect to old HMI. New HMI I can connect only to NTXS ver 1.04, but I can't connect to old software NT2ST.  Finally original application I have with extension *.HMI from NT2ST, but for NTXS I need file with *.pzm. Is any way to connect to both HMI from the same software - maybe I need some special version of NT2ST or NTXS?  The only way to migrate application from old HMI to new one, is to rewrite HMI code from NT2ST to NTXS? thanks for clue  
  2. Dear all, Does anyone have a NTXS verion 1.03? I can only find ver 1.04 in the internet. I am having a trouble while replacing NT3S-ST124B-E. The old one is using RS422 Communication. using a 5 cable in pin 1, 4,5,8, and 9. But it can not communicate after i download the old program I uploaded(firmware ver 1.03) to the new unit (firmware ver 1.04). it keep saying com 1 Communication Error.  From the manual NTXS software, I discovered that the communication driver supposed to be downloaded together with the firmware.   I used this cable RS-232 connection for programming (upload /download) and it works perfectly fine: db 9 Male (NT3S-ST124B-E) to db 9 female (PC) 2 to 2 3 to 3 5,9 jumper to 5   The program i managed to upload using NTXS 1.04 in Win 7 32 bit and sucessfully download to the new NT3S in Win XP 32 bit (tried so many times but it fails on Win 7 32 bit). The program says that the NT3S is connected to CJ1 PLC. The cable used to connect to the old NT3S is using Pin 1,4,5,8,9 which means it should be RS422 (Xtra Drive). I wanted to try using version 1.03 but I can not find it.   Regards, Budianto Scanner NT3S.pzm
  3. NT2S Display - LOOP

    Hello. I have switched from NT2-ST software to NTXS. Now I'm having one small problem. In old software (NT2-ST) I had special screen called LOOP. You defined screens in this LOOP and the display would stay in this loop (using buttons NEXT/PREV) In newer software (NTXS) I can't find anything similar. Do I have to make LOOPS inside PLC to modify STR register? Or define a BUTTON Function on EVERY SCREEN? This would make a nightmare. Thanks. Best regards.