Search the Community

Showing results for tags 'nt21 to nt20s conversion'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 14 results

  1. mitsubhishi serial drivers

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  
  2. mitsubhishi serial drivers

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  
  3. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and dim_length.data[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  4. ello.I am Melani. I working on to convert Siemes S5 code to Logix5000.Following is FB that need to convert.Segment 1Name :John0005 :C DB 2100006 :L FW 400007 :T DW 20008 :L DW 60009 :T DW 1000A M001 :L KB 0000B :O DW 1000C :T FW 0000D :L DW 1000E :L KB 2000F :+F0010 :T DW 10011 :L DW 80012 :<F0013 :JC =M0010014 :L DW 20015 :T FW 400016 :C DB 1500017 :L KB 00018 :T DW 10019 :T DW 2001A :T DW 3001B :***How to convert this code to Logix5000 either structure text or ladder logic?Thank you if anyone can help me to convert it.Thank you.Melani
  5. Hello, I'm not sure if I should make some presentation first but as time is always short i'll just expose the doubt. Unfortunately because of a technician misunderstanding I ended resetting/erasing the PT software after a full memory error. The SW2 switch 1 was used and the system screen data program was erased instead of the program client data. So all the screens menus buttons etc were lost. Unfortunately there was no copy of the application but a similar machine was found were a different screen (NT21-ST121-E) was installed and by luck the programmer technician used the same file from the machine I'm dealing with. I suppose he might have done some modifications to make that machine able to deal with the same and different objects too. But the base menu screens seem exactly the same. In fact the screen buttons appear to be miss aligned as for a smaller screen, so for sure He used the same application. Now the problem is that the NT- Series Support Tool 4.82 only allow auto-conversion of the applications to a recent model. Example, if a make a NT20S application and change the PT type to NT21 it asks for conversion confirmation and all goes ok. (It will need to set Clock Address that I don't know which to chose). But this Is not what is the problem. Problem is that after uploading the application from the NT21 of the other machine to the NT Tool, I can't just download it to the NT20S PT. And if I go to the PT configuration menu it will only allow me to chose another higher model of hardware. Earlier hardware models won't even show in the list. Is there any tool I can use to convert back the NT21 application to the NT20S?   Regards.
  6. Hello All, I am using Wonderware InTouch 10.0 on Windows 7. It's slightly outdated, but its what we have. I am currently writing a script using the StartApp command to open a particular PDF file with the touch of a button. My script looks like StartApp("C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroRd32 C:\1.pdf"); The first part of the command runs adobe and the second part of the command opens the particular file "1". What I need to figure out is, how do I insert a variable into a string. For example I have 55 files I may potentially need to open up, all named 1-55. So I need the file I am calling to be a variable inside of the string so I can call it inside of a loop. I do not want to copy and paste this code 55 times, I want to make the file name a variable (tagname that is a memory real between 1 and 55) so I can run it in a loop. I have only been using Wonderware for a month or so now, so If anything is confusing feel free to ask. Thanks!
  7. Legacy Factory Talk View Project

    Good morning everyone!   I tried to open an older project with Factory Talk View ME which was last opened with “FactoryTalk View Studio 5.0 “. The current version that I have installed and licensed is Release Number 9.00.00 (CPR 9 SR 9), Patch/Pack Number: 00, Build Number 241. Upon opening the project, I receive the following error message:   “The target HMI project is a legacy project (Factory Talk View v6.00 or earlier). Please use the legacy Tag Database utility to convert its tag database to the new format (Factory Talk View v6.10 or later) before opening the HMI project on a computer running on a 64-bit operating system. Refer to Help for guidance.”   I tried to use the Legacy Tag Database Conversion tool, selected “Create Factory Talk View Tag Database in new format”, then I selected “Factory Talk view Machine Edition”, selected the source folder and used the option to “Search Sub-folders”. After hitting the Next button it shows a list of available projects, but the one project that I try to convert is not listed.   Any ideas how to approach this? Is it possible to install multiple revision supports with Factory Talk View? So, far I always used the latest and just created the run time as an older version, if the panel I used wasn’t updated.   Please let me know what you guys think I should try.
  8. Invert scale 0-990 --> 990-0

    Hello.  I have a D word number 0-990. I would like to convert it to 990-0. So i need a function which shows me 0, when the D100 is 990, and shows me 0 when the D100=990. And of course for the between values also. Calculating continiusly. Help is much appreciated :)
  9. Would someone please help me how to convert an integer to ascii?   For example if the output tag is an ascii string, of 3 characters and my numeric input is integer.   When user input a value of 5, I would like the input value to be convert and assign to output ascii string tag of "005".  How do I set the conversion format in either tag assignment or tag expression?
  10. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  11. I'm in the process of converting an old Siemens S5 project (with no comments!) to ControlLogix. My first question is in the S5 there is the odd instruction with a '#' in it: - -] [ - - - - (#) - - - - ] [ - - - - -(F00.1) In old logix the # means a file, what does it mean in Siemens speak?   My next question, I have the rockwell document for structured text and also for converting S5 to logx, is there any other resource that would help me understand Siemens structured text?   As I chip away at the project I'll be posting more questions. Thanks in advance for your help.
  12. Hi all, Looking to convert older .rss ladder file into newer RSLogix 5000 compatible format. My problem is - I don't have 500 series software (or a computer to run it on) to start the conversion. Any help/suggestions appreciated
  13. Original FX3U project written with GX Developer FX Version 8.45X. I now want to program an FX5U with the same program (well, slightly modified). I have MELSOFT GX Works3. How do I import / convert the original project? I have done a web search but can't find the answer. The installed help files don't seem to cover the topic either. Many thanks.
  14. NT21 System Program

    I currently have a NT21HMI that does not have the system software loaded. I do not have any system programs with the *.21 extension. Where can I find the NT21 system software?