Search the Community
Showing results for tags 'nodes'.
Found 2 results
Dear Experts, I want a sample block to find out the status of my Profinet cable w.r.t Hardware configuration. whether the cable is connected or disconnected from the node. Either my nodes may be VFD, HMI, SCALANCE, etc... please share the sample blocks... S/W ===== >Tia portal v14 sp1 update 6 H/W ===== >CPU 1214C DC/DC/RLY hanks in advance
Hello, A while ago I modernised a magazine gathering / filmwrapping machine. This was a fairly big project for which I used an Omron CJ2M as the main PLC, 10 Wago Ethernet/IP fieldbus couplers, a Keyence CV-X420 vision camera and an Omron NS12 HMI. All of these components run on the same network which contains an unmanaged switch where the HMI, PLC and the first Wago are connected. The Wago’s act as a two port switch since they are all daisy chained. At the end of the Wago chain there is also the vision cam which is connected at the last Wago coupler. At the time I was advised against using Broadcasting instead of Multicasting with a managed switch, but I tried anyway since my networking knowlege is lacking. Also, the only ‘bandwidth demanding data’ comes from the vision system. The Wago couplers contain only digital I/O and high speed encoder inputs run directly to the CJ2M. I haven’t run into any trouble so far and the machine is already producing for over a year. Now , a new project is on the way and it will need even more Ethernet couplers, 15 to be precise. This brings me to my question; is there a limit to the number of nodes in an Ethernet/IP network and will I possibly run in to bandwidth problems by adding more remote I/O and not using a mannaged switch? Also, I would like to get high speed input out of one of the Wago couplers. Thanks in advance for any feedback! Greetings from Holland Andy