Search the Community

Showing results for tags 'nb designer control recorder error'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 367 results

  1. Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance...

  2. CX-Designer || Get error history

    Stefan_CJ posted a topic in CX-Designer

    Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display).  Thank you very much!
  3. Hi Everyone, I have FX3U 60MR PLC and TP1200 Comfort HMI, communication perameters on HMI are 9600,7,even,1 stop bit. The problem we are facing is, communication drops after approximately 12 hrs. Analog tags become ### and HMI also dont respond to digital change in plc. Then we Power Reboot HMI and communcation get established. After few hours, same error occurs. we have change the HMI. But issue remained same. HMI is programmed through TIA 13 and TIA 14. HMI also dont allow to change communication parameter. Any one can help please?
  4. Hello, I've connect CP1E with PM2120 with RS485 and already make ladder program to read voltage, current, etc. But the problem is the binary value (D1354&1355) are not appear, and there's error in D1352 with error code : 88 hex. Which is the description of error code is "Exception response", and i already doing some experiment by just making a simple ladder with RXD/TXD instruction and put D1352 addresses and still error, which is same like before (88 hex.). Can i just still do something with this error? Please help me to solved this error problem. *Sorry for bad English Regards, Steven.

  5. FX2nc PLC Error: 6402 Param Error

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, My PLC is fx2nc-32MT. When I diagnosis the plc, this error I Found, 6402 Param Error. Please check the attachment Thanks for your Support.
  6. Is it really not possible to use 2 shortcuts with FTView ME panels. When I try to create the runtime file (.mer), I am getting an error that can not be used 2 shortcuts. Is there any possibilities to make FTView ME connection with 2 different PLC's.
  7. Hello there,   I am using Schneider HMI for the past few years, it's very versatile and easy to design graphics.   Now i started using OMRON HMIs and found that is weird to draw graphics in Omron NB-Designer.   I have Example, Look at the attached screenshot of both software, in the case of Schneider if I stretch a button or any object it will remain in the same good shape. but in the case of Omron, if you stretch any object it doesn't remain in the original shape. (check the attached images.)   Please suggest Ideas about designing a good Omron Hmi, Sample backup is always welcome. The image link is below, I am not able to upload it here. https://we.tl/t-HV9IOnyfAP  
  8. Hello Everyone,   Make - OMRON HMI Model - NB7W-TW01B Software - NB Designer   Suppose I have more than one number input display on a screen of HMI. When I touch and enter the data in any one of them and press enter, the keyboard not closing automatically. in sted of auto close, the cursor moves to the next number input display to enter the data. How to auto-close the keyboard after entering the data in any number input display.
  9. Hi Experts, I would like to know is there any possibility to make a switch that can make exponential increment to a data. i know how to make a switch to increment data in fixed intervals with a switch but im trying to make a switch when you press it continuesly it should increase the gains rapidly over time. is this possible and if yes can someone explain me how? im attaching a sample image how i want to make two buttons to increase and decrease a data. thank you in advance guys. kind regards, sathu.
  10. Hello all I am trying to figure out if its possible to save a screenshot of every screen on a HMI to usb at the same time, so i have currently created a button on a screen that saves the screenshot to external memory, is it possible to make it save a screenshot for every screen instead of just one? maybe i would have to create a kind of function on the plc that cycles through the pages and then takes a screenshot of each? any help would be appreciated currently using a NB7W and a CJ2 cpu 31 although it would be nice for this to work with everything

  11. NX1P2 Motion Control

    simonongsk posted a topic in NJ Series / Sysmac Studio

    Hi:       I need to change an old PLC  with NX1p2  to control 3 servo motor by means of Analog Outputs couple with encoders, My job is to change the PLC only. So the servo drives and drivers are untouchable (No budget and involve too much mechanical works).   I observed that Sysmac Sttudio Axes setting has this: Servo Axes, Encoder axes, Virtual Servo Axis and Virtual Encoder Axes.   I believe the Encoder Axes couple with Analog Output is able to to do the Job? If so, what function block should i use? If no, do any body have a suggestion of any function block i can use? Thanks  

  12. FX-2NC-32MT PLC Error

    Sohel.ahmed.uk posted a topic in Mitsubishi

    Hi, My PLC is showing error. I removed all the input & output cable from the module. Still the error is there. Can anyone help me please. What is the issue here?   Regards Sohel Ahmed
  13. Hi there! I'm trying to communicate HMIS5T HMI with a Modicon Micro TSX3722001 PLC. The communication is OK, but whenever I try to enter some data into a numeric display I get an error that says "Method or function in Communications System unsupported" and data won't change on PLC's Animation Table. Also, if I modify a variable's value in PL7 Pro, the value in the HMI numeric display won't change properly. It displays the last digit of the binary format of the number (let's say I write a "3" on PL7 Pro, then I get a "1" on the numeric display, despite all data types being UINT, and all ranges are OK. Then if I write any number which binary version ends in 0, I get that 0 on the numeric display, nothing else. Again, all data types and ranges are OK). Changing variables' source on Vijeo Designer to Internal doesn't seem to work. So I'm wondering what else must I do in order to send and receive data from/to HMI and PLC?    Thanks in advance and I hope you can help me! Update: Got this solved. For anyone wondering, Vijeo Designer 6.2 SP8 it's kinda buggy with Unitelway communication. There's a hotfix that solves this problem, provided free by Schneider.

  14. NB-designer V1000

    baxx1989 posted a topic in HMI & SCADA

    Hello. Can someone help with an example program in the nb-designer application for communication with drive v1000 yaskawa after modbus RTU (rs422). It was very important to me that the reference speeds were shown in this example (d1-01; d1-03) could also be acc - dec (c1-01; c1-02) Of course, I have the NB7W panel and the multi drive v1000 yaskawa

  15. CJ1M con CJ1W-EIP21 a ControlLogix

    Eduardo Juarez posted a topic in CX-Programmer

    Hello I am trying to communicate a CJ1M with a CJ1W-EIP21 Card, with a Logix Control, but I have not been successful, what I am looking for is to read data, from the OMRON and see it in the Logix Control, but I have not been able to establish communication, I am looking for someone You will already have a functional example, with the backups of both PLC'S, to be able to observe how they made the configuration. Thank you for your support Greetings

  16. OMRON NS5-SQ10B-V2

    Pujdan posted a topic in CX-Designer

    Hello, I have an issue with NS-5 HMI. During transferring new program into HMI, after rebooting I get message: ERROR No.10: file system error: please recover the system program. What is procedure from where I can recover this HMI? I didn't find  folder on CX-Designer under C:\Program Files\OMRON\CX-One\CXDesigner\RecoverUpdate. Is there other way to fix this ERROR? I download firmware and copy it to the CF card. When I insert CF card into NS-5, and after power on unit, RUN LED light become steady orange for 10seconds and than it become steady green. Screen is black and there is not possible to do (chose) nothing. CF card is original OMRON card and wasn't formatted. How to solve this issue???
  17. I saved a project I am working on, had to conver it before I saved? Came back to make edits and when I went to add a new rung it come up with this error? Any fixes? Many thanks, Sean
  18. I'm having trouble with some Powerflex 525 drives. Right now what I need to do is run them manually from the keypad to test conveyor belts.  Is there a way to do this and if so how?   Thanks in advance.
  19. I'm trying to transfer an application file to a PanelView 1400e and I'm having some difficulty. We currently have 4 of these in operation on machinery and we acquired a spare that I'm trying to get ready. All use the same exact application. I tried using a memory card but none of the PanelViews recognize any of the cards I do have at the moment so that option is out (though at one time we did transfer the applications this way so we did have at least one card that worked in the past). I was able to extract the application file from one of the PVs via Transfer Utility 32 on Windows XP. I am unable to transfer it back to the spare PV. I am using a 9 for 9 straight through serial cable on COM1 of the laptop to the 9 pin DB connector on the back of the PV. I match settings between the PV and the TU32 (baud rate, parity, error). I put the PV on Transfer Application screen on the Serial tab. I open up TU32 and choose the application file (approximately 86kb in size). If I select memory partition 1 for the destination, I get a dialog that pops up telling me that partition 1 is full and it shows me the size and free space on both partition 1 and partition 2. The size for partition 2 matches what I see on the PV on the Terminal Information screen (approximately 2200kb in size and same is free). When I then select partition 2 for the destination and click OK, it asks if I want to format the destination. If I click NO, the transfer fails because "User did not format the destination". When I click Yes to format, the PV starts formatting partition 2 and the progress bar goes up to 100%, then a message comes up that the format is complete, waiting for application transfer. On the TU32 screen, the format progress goes up to 11% then hangs and eventually reports that the format failed. I've done this a number of times and it is always 11%. However, when I click OK and then go back to the main screen on TU32 and once again select to transfer, the PV screen goes into transfer mode with a progress bar as does the TU32. No progress is ever made and eventually I get the 4209 error. 4209 error means the TU32 and PV are not communicating, basically. But I'm confused as to why they initially do communicate but only get to a specific point each time before communications stop. Any ideas? EDIT: Once I get the 4209 error, I click OK, and go back to the main TU32 screen. If I immediately click to transfer again, the progress bar on the PV disappears and a message comes up saying File Download failed-Ready for Transfer. If I click to Transfer again, the progress bar reappears but still no progress and this process repeats. Thank you in advance for any help you can offer.
  20. Hi there! I've been working with NB HMIs with good result. But today I loaded a project to a NB7-TW01B and it feels slow, both offline and online. Switching screens and reading/writing take around 1sec or more. It first had some bmp images created with .bmp and .png files, so I tried using vector graphics instead, but didn't get any better. I don't have another NB to try it right now so I'd like to ask you if you've been in this same situation before or what could be causing this. PLC is CP1L and communication it's via Ethernet. Both devices are actually pretty close (cable is less than 3m) and the previous HMI (Pro-face GP) felt a lot faster. Thanks in advance!
  21. Good day everyone, I recently got NB HMI and program it together with my NX1P2 PLC. I got 2 questions I would like to ask. What I'm trying to achieve is to lock all the button after I start my system or during the pop up screen for confirmation. I tried different methods and it doesn't work. Currently I'm using a direct window Pop-Up screen to cover all the button behind it, but I noticed if I drag the pop up screen, it'll move together. So I wonder, is there any correct methods of doing it? Also, the function key for change screen, I use it for Pop up screen but why it only spawn on the top left of the screen instead of the center? Thanks in advance guys!
  22. Hello everybody, I've been searching for a solution for this problem, but haven't found it yet. When the user is done with a task, a certain bit turns ON. Then a poppup should popup. I tried using alarms, but that won't work, because I have to initialize an alarm display on every window I've made.  Can somebody help me?  Thanks,  
  23. Hey Everyone,   My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong.    I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through.  I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on.   Thanks in advance.
  24. Hi,     I'm trying to communicate Omron CP1E unit with PC via serial port using hostlink protocol.  I need to read the Timer/Counter SV value and write the timer/counter SV values to the PLC.  I'm able to use other C mode commands (like RC (timer/counter PV read), WC (timer/counter PV write) etc.) but when I give the command for Timer/Counter SV Read 1 which is R#, I get the response as IC (Undefined Command).   How do I write or read the timer SV Values?  Example command and response : @00R#TIMH001028*  (TIMH is the high speed timer, 0010 is the timer number and 28 is the FCS) Response: @00IC4A* Is is that CP1E doesn't support these commands? If so what is the equivalent command that I should send inorder to perform this? Please help.  
  25. Hi guys, so i'm trying to send data to plc omron cp2e-n40dra via RS232C, I use RXD and TXD but it looks like my programs are wrong, the indicator of RS232C are on everytime i send the data so it looks like PLC receive my data but when i see it in memory PLC D i can't find any data stored. Can anyone help me please? I attach my Gdrive for pictures since i can't upload pictures in here *The data that i sent is in ASCII https://drive.google.com/drive/folders/1GPXa1U1PLMU2WKmo4YRPe32wHHyVCGUv?usp=sharing