Search the Community

Showing results for tags 'nb designer control recorder error'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 367 results

  1. I'm working on a program where I manipulate REAL numbers in Sysmac studio using an NX1029020 PLC. My problem is I am new to automation and I don´t know how to display those numbers when connecting to an NB HMI. I´m trying to send the data to a bar picture and a number display. My question is which AT Specification Attribute should I assign to my variables in Sysmac Studio and their corresponding Area in NB-Designer? I tried using the DM area but it didn't show numbers on the displays, only shows *****. Should I convert my real variables in Sysmac first? Or how can I keep decimal numbers and then display them? My current configuration in Sysmac: Name Data type AT Network publish ST1 REAL %D5 Publish Only ST2 REAL %D3 Publish Only My current configuration in NB-Designer Bar Picture Addr. Type D Address 3 Code type BIN Number Display Addr. Type D Address 3 Code type BIN Data type Float Integer 4 Decimal 2
  2. Can someone please suggest a Control Panel Builder that is located in Germany?   I work for a company in Australia and due to Covid 19, we are struggling to meet an onsite date for a project in Germany.   This project uses Siemens PLC gear, Danfoss drives, and mostly Schneider electrical gear. The enclosures are custom and stainless steal.    I have electrical schematics and enclosure drawings for quoting.

  3. Panasonic FPG-C32T2H - E45

    pszczepan posted a topic in Other PLCs

    Hi, I have PLC with Error E45. I am not very familiar with Panasonic and in manual, explanation is not very clear for me. Any help appreciated    
  4. Hi. I use the email block on few of our NJ101-9020 controllers to send out daily reports or any status updates. Recently the PLC's started an unknown issue and fails to send email out anymore. I use the Mail_Send function block from Omron to send emails. The only Error ID i can get is 2005, with status being "Connection to SMTP" failed. Looking at the troubleshooting guide, i cannot find anything to do with error id 2005, in fact its missing. There is 2004 and 2006 but no 2005. I've tried all the obvious thing like, power cycle, redownload the whole project, create a new instance of Mail_Send function block etc. Nothing seems to have fixed this unknown issue. Our IT department did a full check on their side and nothing seems to be out of order. I can still remote into the PLC, so i dont know what exactly is the problem. Has anyone came across this error ID before? Any ideas why this might have been happening? It was working well until few weeks ago and nothing changed and this suddenly started. Any input is really appreciated. Thank you.
  5. Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project?  
  6. PWTech is a rapidly growing company specializing in wastewater treatment equipment. We are currently hiring for a Controls Engineer. This is a full time position with some travel required. Requirements: 3-5 years experience Proficient with Allen Bradley MicroLogix, CompactLogix PLCs, PanelView HMIs Proficient with ladder logic programming Proficient with basic electrical theory, control systems and electronics Familiarity with NEC, with special focus and understanding of articles 409, 430 A high level of proficiency in written/spoken English Familiarity with Unitronics PLC/HMI is desired but not required Duties will include: Producing control panel submittal and as-built layout drawings, components lists, and line diagrams Selection and integration of sensors, motors, control systems and other mechanical and electrical equipment. Coordination with internal and external project engineers to resolve electrical and control questions and issues Programming, modifying and troubleshooting Allen Bradley and Unitronics PLCs and HMIs Providing assistance and remote support to field personnel Maintaining inventory of long lead items for warranty and project purposes. Location: Rosedale, MD (outside Baltimore) Technologies: 50% Allen Bradley 50% Unitronics. Salary: 95k-105 depending on experience. Higher if you have >10 yrs experience. Contact: Kreal@pwtech.us
  7. Hi guys I have an control logix plc im looking for a module which is the same as 1769-ascii module. I know that module is for compact logix. Unfortunately i didnt find a good one for that purpose.  Anybody can help with that ? Thanks ahead.         

  8. NE1A-SCUP02-EIP

    kckku posted a topic in Omron

    Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network.  The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch. 

  9. 0x0408 error

    New plc man posted a topic in CX-One

    Friends need help on my plc omron CJ1W-PA202...can't find it's IP and connect with my servo drives 
  10. I am new to automation systems and devices and I just want to know how to connect two HMI's (each one would control different things) to one PLC using Sysmac Studio and NB-Designer via Ethernet. The model of the PLC is NX1029020 and the HMI's are one NB10W-TW01B and an NB7W-TW01B. I searched for info about this topic online but I couldn't find anything that worked for me, I saw an article from OMRON where they connect two NB's to the CP series, but in my case, NB designer doesn't allow me to insert more than one HMI in the same project, I also found something similar on a youtube video that gave me an idea about how to connect multiple HMIs exporting the pks file and importing it to another HMI project but I still can´t figure out how to add both to my PLC. I would thank you a lot if you could help me with this because I know it's not a rare implementation, just I haven´t found the right way to do it. I also leave the links to the Omron article and the youtube video I found. https://www.myomron.com/index.php?action=kb&article=1554 https://www.youtube.com/watch?v=rXx5lut7G9I
  11. Hi I have encountered a problem with CX-integrator. I'm not able to open the program. The following message appears:  System error. Save the date and close the application.  (Error code 0035) I have tried to reinstall the entire CX-one packet.  Any ideas?  Regards MBD

  12. Fanuc Robot Error SPOT-474 and SPOT-476

    jnelson15 posted a topic in Robots

    Hi, I am new to this forum and pretty new to programming fanuc robots. I do have one program that is working in production under my belt. The company I work for recently bought a used M-20iA with a R-30iB controller. The robot was tested and worked before it was shipped to our facility. However, not upon start up the robot faults out and gives the error messages:    SPOT-474  NM&OUT24v shorted after MCC SPOT-476  Fix Pwr short & then cycle    I am wondering if a wire was vibrated loose during the shipment, however I have not been able to find anything in the cabinet. It looks like all of the boards are lighting up and working fine. I have been unable to find any documentation on these particular SPOT errors.    Has anyone experience this error and knows how to fix it? Or does anyone have resources that may shed light on the situation? Thanks!
  13. ello I have a powerflex 400 of 25HP for a 60amp 25HP motor, the motor have a belt that move the clarifier of milk. It is a process that requires strength to move.So I try with the motor without the clarifier the vdf works well with a constant amp of 12 to the max of 50hz that is set up with a ramp of 600 sec.Then I try with the belt that move the clarifier... The vdf start the ramp with a wird amp behavior like 10 sec 100 amp and then 13 amp for 10 sec.When it gets to 50hz (the max) it starts the same behavior 13 amp when it reach the max RPM and when it decrease a little bit it gets 100 amp to get to the max RPM again.In this vdf powerflex 400 I didn't see the % of torque options that the last one Fuji had.Someone told me that powerflex 400 is not for power processed, they are focus in pumps and blowers more alike, and that I need a vdf vectorial like a powerflex 725.What do you think...PD: as the 100 amp is like 10 sec the protections dont show up. PD: I made a try with water and hot water, in that point with the max hz  (and 6800rpm) when the hot water start to flow the amp gets constant in 75 amp, but the motor dosnt get to the 6800 rpm again it just keep trying in 6700rpm and it mantains the 75amp triggering the motor protection for overload.

  14. GOT2000 Recipes

    psooy posted a topic in Mitsubishi

    Hi I'm new to GOT2000 Hmi and I have a problem about creating recipes on (GT2107). Do I need sd card or usb memory stick to save recipe or I can save it in inside memory of hmi?  Can someone told me how to do it step by step cause I only have errors when I want to save or load recipe.  Thanks in advie 
  15. Hello to all  We have a problem with starting CPU. In GX Developer we click "Diagnostics" and see Error 2400 File set Error. What causes this error? Error code list[Error code 2400] and point to step / parameter 1100 we already have format the memory the last thing not tried yet is :  - swap the CPU , (still in process provide by purchasing) - change memory battery (as per suggest by machine vendor) kindly needs some suggestion if anyone experienced this problem, or maybe some tips    Applicable machine    QnA series PLC ===================================================================================== Error code(SD0)    2400 Error message    FILE SET ERROR LED status(RUN)    OFF LED status(ERROR)    Flashing PLC operating state    Stop Diagnostics timing    At power ON & reset [FILE SET ERROR] The file specified with a parameter does not exist. ■ Collateral information • Common information: File name/Drive name • Individual information: Parameter number ■ Diagnostic Timing • At power-on/At reset/At writing to programmable controller/STOPRUN Read the individual information of the error using the programming tool to identify the numeric value (parameter No.). Check the drive name and file name of the parameter corresponding to the value, and correct it as necessary. Create the specified file and write it to the CPU module.
  16. How long  could be INT array. For example can I build INT[365] or DINT[365]? When I use more than [32] my controller fails. Thanks. 
  17. Added new tags to an existing (and operational) PDB file.  Using DEMO mode switch (/t) to quickly add without USB dev dongle.  When switching from Workspace to Runtime all tags and graphics work.  However, when I switch out of DEMO mode and restart iFix, all tags show up as "Not Defined". the IGS OPC Quick Client shows good comms and data with the new PLC sources, so it's not a PLC comms issue.Truth be told, I do not work on iFix very often, so I'm hoping I just missed a simple step.Thanks in advance!

  18. GOT MES Interface connection status

    sante123 posted a topic in Mitsubishi

    Hi, Is there any way to read current status of the MES Interface connection and show it on the screen? Recently I've had a situation when MES Interface wasn't able to reach a SQL Server (there was an error in the diagnostics window), but the "Access error notification setting" bit was 0.
  19. I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC:    -Online > Read from PLC    -Select PLC Series: QCPU (Q mode)    -Select PLC side I/F Serial Setting: Serial USB    -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit:    -Online > Monitor > Monitor (Write mode)    -Execute the function below when mode is changed: Checked all    -Edit the program (basically just deleted one -||- contact and drew back the line)    -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
  20. Hi everyone, To explain the problem a little bit: I have 2 systems that are equal, they have 1 PLC, 1 Inverter and 1 Servo Axis (Image01). The devices are connected via EtherCat. The thing here is tht in these systems the PLC and Servo Axis is the same but the inverter is different. My goal is to have the same project on both systems and depending on the inverter detected use the correct program. What worked: If I add the 2 Inverters and 2 Servo Axis on the project on different nodes (Image02), I can detect which is present using the variable _EC_EntrySlavTb[n]. My issue is that if I want to make more replicas of the systems using different inverters I will eventually hit the Axis Number limit for the PLC while in reality I am only using on Servo Axis at a time. What I wanted: I would like to be able to control 1 Servo Axis with 2 different inverters (only one active per PLC) (Image03). What I tried: The axis parameters can be set using a variable of the type _sAXIS_PARAM, however it seems that the option to change the axis basic settings is not available (Manual: NJ/NX-series Motion Control Instructions Reference Manual (W508) page 5-58) (Image04). The axis basic settings is where the definition of the output device plus control words are set (Image05). Is there a work around to solve this issue? I would really like to avoid having to manually change the output device for the Servo Axis every time I make an update on all the systems.   Best Regards, BR  
  21. Hi, I'm looking for help with the string exchanging between GT25 and AB CompactLogix. I'm reading recipe data from SQL via MES interface to the local devices such as GD3000. I want to move the string held in the registers GD3000-3009 (20 characters) to the string tag in the Allen Bradley. The problem is that in the scripting I cannot enter the AB Tag, because when I imported the CSV with the string tags their data type is STRING, and the scripting in GOT accepts only numerical datatypes such as WORD, etc. Has anyone found a way to handle that?
  22. Good Afternoon, I am wanting to do two things with and ORMON PLC and HMI with CX-Programmer and NB-Designer. 1. I want to display the current time from PLC on HMI with the real time clock. 2. I want to be able to enter a time on the HMI which will be compared to the PLC time and will stop a process when when the entered time is equal to the actual PLC time.  If I can have some help with this that would be a great help. Thanks,

  23. How to use NB Data Logging

    Link068 posted a topic in Omron

    Good Afternoon All, Just wondering if anyone would have any example code of using the Data Logging on NB designer? I am wanting to use a PID controller and display set point and process variable etc. I have looked in the manual but a coded example would be extremely helpful.    Hope you have a good weekend. Thanks

  24. simple motion cam curve

    AndersonJr posted a topic in Mitsubishi

    Good afternoon, I have a problem in an application for a rotary knife, I'm using a MR-JE-B servo to make this movement, while my material is powered by an inverter connected to a modbus rs485 network, with a 5v encoder connected directly in motion. I'm having some problems and I think it's my cam curve. I have a very high refeneration, and the system doesn't obey the size of the length I want the cut. It always cuts the same size, regardless of the configuration I use, it always cuts to 245mm. Put some photos, how are my settings. Grateful in advance, if anyone can help me. Dover_roll_1-Motion-configuração_jog_manual.gx3
  25. Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it).  So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!