Search the Community
Showing results for tags 'modnet'.
Found 3 results
-
Hi team; I am struggling with a Citect SCADA read of some data. The system is using the "Modnet3" driver over TCP/IP to talk with a system (Modnet 3 as its TCP/IP with first register at 0 and 0 to 15 bits). I am reading the modbus data into variables which is working fine for the analogue values all defined as real in citect. The Issue I have is that the driver help says I can direct reference a bit in a word, in my case address 45052.1 Holding register 45052 and Bit 1. If I read this as a UINT I get a value of 147 corresponding to bits 1,2,5 and 8. Citect generates no errors for the tag setup where I define 45052.0 through 45052.15 but all remain as zero in tag lists. Any help would be fantastic Kindest Regards Howard
-
Hi guys, In my current project, I have a number of energy meters (128) communicating on Modnet (TCPIP) with Citect as different IO devices. I have a screen, where I wish to display the communication status of each IO device. If there is an error communicating with a particular I need to associate a tag for displaying the same. Can someone guide me how to accomplish this. Thanks for looking in.
-
Hello all, I'm working on existing project with Citect scada V6.0. My actual HMI communicate with my TSX P57 threw OFS. It works fine. I've a new project about linking Citect with 1 Wago PLC, using modnet. I've created a new project for that, out of my actual project. It's working fine too. I can read all the modbus TCP datas of my wago Unit. My problem is now integrating my wago project into the actual. I include it into, but it does not work. To resume, If i use the only actual project, I can watch my data on the screen threw OFS; I i use the modnet project alone (after configuring the citect computer setup), i can wath my wago data on the screen. If I use the both project together, (including modnet project in the actual), modnet data are not linked. Any ideas to help me? thks all
