Search the Community

Showing results for tags 'modicon 340 vijeo citect explorer v7.3'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 123 results

  1. Hello, I am new to Scada Programming. I am using Citect scada V7.50. I have completed whole project, but I am unable to generate Excel report for Alarms generated during run time. Please help me for this issue. Thanks...

  2. M2I & Modicon M221 interface

    NoamC posted a topic in HMI & SCADA

    Hello, I have an M2I Top RW (model: 1000WD) connected to a Schneider Modicon M221 PLC. The HMI is connected and I is working perfectly reading data from the PLC via ethernet. I can't seem to find a way to write to the PLC from the HMI. I would like to control the PLC from the HMI, I know this is possible with Fatek PLCs with the same HMI model. please help - how would I create a bit command from the HMI to the PLC? what registers? what inputs in the PLC? thanks
  3. Hi All, Have recently embarked on a project that has required me to change over to GX Works 3 in order to link an IQ-R120PCPU to a Citect 2018 SCADA package . In days gone by under IEC Developer and GX Works 2 it was quite easy to establish communications between the programming package running in simulation mode and a running Citect system using the MXCOMP driver via MX Components to perform offline testing. Can't seem to find a way to get it to work under GX Works 3 though, has anyone tried a similar setup Simulated logic in GX Works 3 is running fine and can modify the IO from inside MX Components "PLC Monitor Utility" program so there is no issues there, just cant get Citect to communicate. MX Component comm's has also been proven reading/writing variable to an excel sheet with GX Works 3 in simulation mode also. Attached are the files for getting GX Works 2 up and communicating to Citect 2018 via the same method i am trying to get working in GX Works 3 in case anyone ever needs to use that method. Any help would be appreciated.     GXWORKS 2 & CITECT 2018.zip
  4. Hi, I have a modicon premium plc rack with TSX PSY 3610 power supply module. The psy 3610 power supply has an alarm contact and it is used in a loop to energize a hard ware relay for 24VDC supply to the DO module FTA boards. There is a safety button in parallel to the alarm contact so that during startup we can press this button, energies DO module loops and all IO faults cleared and power supply alarm contact latches The problem is that this power supply alarm contact remains always open even when IO report no faults. The PLC has MAST task only and it is running with no faults. If I jumper the alarm contact all the IO's are healthy . tried changing the power supply and DO modules. no hope. please help.

  5. Check serial connection to Omron PLC

    lironhallak posted a topic in Omron

    Hello, I am building an application in CitectSCADA and I want to communicate with an Omron Sysmac CS1G. The connection between the plc and the Citect computer is through an ethernet to serial adapter (the computer doesn't have com ports on board). I'm having some difficulty establishing the communication and I want to make sure that I can actually reach the plc. Is there a way to check that the computer can reach the plc over the serial connection without using CX programmer? Maybe using Hyper Terminal, Putty or something similar. Thank you, Liron
  6. Hi ya,  can someone please advise if it is possible to add a text box that the user can enter a name / description to.  I am hoping the user can select the text box and a pop up keyboard will appear for them to enter a description on a magelis hmi.  I look forward to your advise. 
  7. I am having a problem getting citect to write to my sql database.  Whilst it will write I am restricted by the length of a single cicode command. I think its 255 characters. For my problem I am trying to write 48 tags to the database in one write command to obtain 1 time stamp. Is it possible to write multiple times to the same tables row ? Currently when I write a new row is created at the given timestamp. the cicode is attached. A solution would be to do 4 writes of 12 tags at a time but all would need to go in the same MSSQL table row. I'm ok using the data instead of time and date as this write only happens once each day Any help would be awesome..   *********************************************************************************************************************************** /* **    FILE:        SpurLoad.CI ** * Load Tags from Citect in TO temp array */ STRING tagname[24]="M340_PwrCtrl_SLD0000","M340_PwrCtrl_SLD0030","M340_PwrCtrl_SLD0100","M340_PwrCtrl_SLD0130","M340_PwrCtrl_SLD0200","M340_PwrCtrl_SLD0230","M340_PwrCtrl_SLD0300","M340_PwrCtrl_SLD0330","M340_PwrCtrl_SLD0400","M340_PwrCtrl_SLD0430","M340_PwrCtrl_SLD0500","M340_PwrCtrl_SLD0530","M340_PwrCtrl_SLD0600","M340_PwrCtrl_SLD0630","M340_PwrCtrl_SLD0700","M340_PwrCtrl_SLD0730","M340_PwrCtrl_SLD0800","M340_PwrCtrl_SLD0830","M340_PwrCtrl_SLD0900","M340_PwrCtrl_SLD0930","M340_PwrCtrl_SLD1000","M340_PwrCtrl_SLD1030","M340_PwrCtrl_SLD1100"; /* add array TO hold values */ STRING tagval[24]; INT hSQL; FUNCTION SQL_INSERT_lds() /* Loop FOR number of tags (13 lots of 30 min) TO be read adding to array Variables */ INT i;     FOR i = 0 TO 21 DO              tagval = TagRead(tagname);              END      /* Open ODBC connection TO CitectDB configured in ODBC Manager with DSN_SQL */          hSQL = SQLConnect("DSN=DSN_SQL"); /* IF connection IS OK, insert in TO table "lds" the values */ IF hSQL <> -1 THEN     SQLExec(hSQL, "INSERT INTO lds (dateandtime,S0000,S0030,S0100,S0130,S0200,S0230,S0300,S0330,S0400,S0430,S0500,S0530,S0600,S0630,S0700,S0730,S0800,S0830,S0900,S0930,S1000,S1030) VALUES (SYSDATETIME(),'"+tagval[0]+"','"+tagval[1]+"','"+tagval[2]+"','"+tagval[3]+"','"+tagval[4]+"','"+tagval[5]+"','"+tagval[6]+"','"+tagval[7]+"','"+tagval[8]+"','"+tagval[9]+"','"+tagval[10]+"','"+tagval [11]+"','"+tagval[12]+"','"+tagval[13]+"','"+tagval[14]+"','"+tagval[15]+"','"+tagval[16]+"','"+tagval[17]+"','"+tagval[18]+"','"+tagval[19]+"','"+tagval[20]+"','"+tagval[21]+"')");     SQLEnd(hSQL);     SleepMS(100); SQLDisconnect(hSQL); ELSE     Message("Error Message","SQL TRADING DAY DATABASE WRITE FAIL",48); END END   SpurLoad.ci

  8. TP1500 browser

    cyrus posted a topic in Siemens

    Hi dears, I have one TP1500 comfort.but my plc type is not siemens.it is kieback & peter plc.for connecting to this plc i only need browser.there is IE browser on touch panel.but when i insert ip address of plc pages did not load.i tested in my laptop and i updated java scripts of my browser and the problem solved.now i want to know how can i update java scripts in my TP1500 comfort? the windows of this touch panels is windows CE.  Best regards.  
  9. Hi guys, I installed new MachineExpert v1.2 and Vijeo 6.2.9 on Win10 machine. When connecting simulation PLC to Vijeo to test my application everything is good. I go to PLC and check the nodename (see the pic attached) which I put in my Vijeo application and everything works. Issue is, because of my hard drive capacity I am forced to work via VM (but this is my preffered way also because of number of PLC softwares used). When I installed from the same installer (everything same as my local Win10) on Win7 VM when I run simulation I get empty space where the PC simulator should be visible which nodename I should type in Vijeo. Also I noticed when going to gateway management console in VM the process is active, same parameters as in host machine. Turning off the gateway on the VM turns it off as well on the host. Is there a known problem of connecting to simulator on VM? Or win10? Unfortunately I don't have Win10 VM to try right now.. Anyone can help? Much appreciated!
  10. Dear All, TM241CE40R is installed with firmware 4.0.3.18 If I buy new CPU with some other firmware, will it work or I will need to change the firmware?  
  11. Hello. I am having 22 slaves communicating to a master on rs485 half duplex.i have selected baud rate as 38400 on a length of 800m.The problem is out of 22 devices only six are communicating .i have checked wiring,inserted termination resistor but still not getting rest of the devices alive.is it that i have selected high baud rate on a long length?this is the only problem as i am seeing it.can somebody help me on this issue
  12. Looking for any and all new industrial surplus and even some used on a case by case basis. Anyone have any questions feel free to email me at contact@trojansupply.com We also have some great deals on any items we have instock we compete on price as we are a small entity. Same day shipping available. 
  13. Hello - we run a car wash that is controlled by a Modicon TSX Micro 3721001. It is indicating a CPU fault. I've attached a picture of the unit in place, with the LEDs lit. I have ordered a new base unit (2nd picture). I haven't tried it out yet, but it is tested working. I am hoping a base unit replacement will solve the problem, but wondering if it it possible the problem could be in the modules? I did not order those but now wondering if I should have... If the issue could be with the modules, is there a way to test which one it would be so I won't need to order all 4? If it coult be a module, I might order that now as I am in a rush to get back in service. Thanks for any guidance! Andy
  14. Hello. I am trying to make a serial RS 232C connection between Schneider Magelis HMIGXU3512 and Omron PLC CP1E. However, there seems to be a communication problems between both of the equipment. I am using cable XBT Z9740 for the serial communication cable. The format used is 8.2.N for both equipment. The baud rate is 115200. No Flow Rate is choose. Anyone can help with this kind of problems?
  15. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  16. Please could you assist with the software required to download data tables from 4 off DIRIS A10 Multifunction Meters into TM221CE40R Logic Controller via TMC2SL1 Comms Cartridge using Modbus Protocol over RS485. I have downloaded the Modbus tables from Socomec but not sure how to get these into the PLC. I would really appreciate your help in achieving this. I am using EcoStruxure Machine Expert - Basic to program the PLC & DAQ Factory Developer Release for my Touchscreen. Link to Socomec Modbus tables: https://www.socomec.com/files/live/sites/systemsite/files/SCP/6_gestion_energie/diris/diris_a10/DIRIS-A-10_COMMUNICATION-TABLE_2018-01_DCG01013_MULTI.html#General
  17. This course is designed to equip the novice with no prior PLC programming experience with the basic tools necessary to create a complete PLC program using ladder logic common to most current platforms. Use Software : - Somachine EcoStruxure Machine Expert Basic - Free - Vijeo Designer Basic Full Articel About Lear PLC Schneider  Video Tutorial Learn PLC Training Free
  18. I am trying to write some citect variables back to the PLC. I have made a startup cicode script which is suppose to copy one variable to another which I found on the web. I am not sure if just using tag = tag is OK in citect 2018. Any help would be fantastic.   Cicode below: *********************** FUNCTION StartUpFunction()     INT hMyTask;     // Start a new task that runs all the time and transfers values using writetag     hMyTask = TaskNew("fnDoThis","",0); END FUNCTION fnDoThis;     //Never Stop this Loop     WHILE 1 DO         //Update the first Tag         TagWrite ("M340PLC_R02kW",Sub02Substation2PowerkWtot)         M340PLC_R03kW = Sub03Substation3PowerkWtot         M340PLC_R04kW = Sub04Substation4PowerkWtot         M340PLC_R05kW = TerminalSubstation_5InstantaneousPowerkWtot         M340PLC_R06kW = TerminalSubstation_6PowerkWtot         M340PLC_R07kW = Sub07Substation7PowerkWtot         M340PLC_R08kW = Sub08Substation8PowerkWtot         M340PLC_R09kW = Sub09Substation9PowerkWtot         M340PLC_R10kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_R11kW = Sub11Substation11PowerkWtot         M340PLC_R12kW = Sub12Substation12PowerkWtot         M340PLC_R13kW = Sub13Substation13PowerkWtot         M340PLC_R14kW = Sub14Substation14PowerkWtot         M340PLC_R15kW = Sub15Substation15PowerkWtot         M340PLC_R16kW = Sub16Substation_16PowerkWtot         M340PLC_R17kW = TerminalSubstation_17PowerkWtot         M340PLC_R18kW = Sub18Substation18PowerkWtot         M340PLC_R19kW = Sub19Substation19PowerkWtot         M340PLC_R20kW = M340PLC_G1_GEN_FREQ_PV                 M340PLC_R21kW = Sub21Substation21PowerkWtot         M340PLC_R22kW = Sub22Substation_22PowerkWtot         M340PLC_R23kW = Sub23Substation_23PowerkWtot         M340PLC_R24kW = Sub24Substation_24PowerkWtot         M340PLC_R25kW = Sub25Substation25PowerkWtot         M340PLC_R26kW = Sub26Substation26PowerkWtot         M340PLC_R27kW = Sub27Substation27PowerkWtot         M340PLC_R28kW = Sub28Substation28PowerkWtot         M340PLC_R29kW = Sub29Substation29PowerkWtot         M340PLC_R30kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_R31kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_R32kW = PV2_SSB1PowerMeterPowerkWtot         M340PLC_R33kW = PV2_SSB2PowerMeterPowerkWtot         M340PLC_R34kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_R35kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_R36kW = M340PLC_G1_GEN_FREQ_PV         M340PLC_PQM3_WATTS_PV = HV_MetersBunnings_Intake_StnPowerkWtot         M340PLC_SOL01_SSB1_KW = SolarSSB1PowerMeterPowerkWtot         M340PLC_SOL01_SSB2_KW = SolarSSB2PowerMeterPowerkWtot         M340PLC_SOL01_SSB3_KW = SolarSSB3PowerMeterPowerkWtot         M340PLC_SOL01_SSB4_KW = SolarSSB4PowerMeterPowerkWtot         //Go to sleep for 1 second so as to not overload CPU         Sleep(1)     //Go back to start of Loop     END //End of Function END  
  19. I have a Modicon NOM0200 unit connected to an access switch to send commands to various rs-232 devices. The Access switch requires a "disconnect string" to end communication with a particular port. The disconnect string is "CRTL+D", how can I send a "CRTL" keystroke from the NOM0200 unit? I know for carriage return it is "$R" is their a similar combination I can enter for "CTRL"?  
  20. I am working on a project with two M340 PLCs and need to read a Real type data point into my PLC from the other. I have setup my READ_VAR block to do this, but I'm having trouble understanding the form of the output. I get that a Real type takes two registers and that each register will be read into a part of an Int Array through the READ_VAR block, but how can I now convert it back into a Real so I can use it in my logic? This is just a fundamental thing that I can't get my head around, maybe I've already read the answer somewhere online but it isn't making sense to me. This also needs to read an updated value every second because it is being used for an interlock. Do I use a TP to enable the READ_VAR this way?
  21. dear all  i have  2 NOE cards (network TCP/IP card) on a modicon quantum hotstandby system, one NOE install at primary CPU and one on secondary CPU. both NOE cards communicate with InTouch through same switch. the problem is that i can't write data to the plc whenever both NOE card are on the network. when i remove the standby controller from the network i can write data to the plc. the switchover of hotstandby is tested and working fine. can anyone tell what i am missing here. thanks i advance
  22. hi really i  need the help from someone  i dont have any idea about the step to  a project  i wish to someone support me and help step by step  radouan_2020@hotmail.com
  23. Dear all schneider Experts, anyone having "Vijeo designer screen editor"Software for XBT012110 megelis HMI. Please give a download link, I got very  stuck  to get this software #Advanced Thanking you......
  24. Does anyone have the User Manual for the Modicon Plus 1000? Trying to program a "ReadOut" template to show the value of a PLC-5 Integer file. Keeps saying that the "N" is not a valid file type. I've done this on the Cutler-Hammer PM1000. The Modicon will not allow the C-H program to download, says it's not a C-H product. Thankx in advance for any help

  25. Vijeo Citect - write to tag - error

    Nizami_225 posted a topic in Mitsubishi

    Hi everyone.  In Vijeo Citect SCADA I created some tags and I try to write to a bit device of MELSEQ Q PLC. But I get this error : Cicode General software error. Note: I can read from PLC.