Search the Community

Showing results for tags 'mm430'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 1 result

  1. Help needed with MM430

    Hi everyone, Now I used Micromaster 430 controlled by a PLC. I set parameters as follows: P0010: 0  P0100: 0 P0700: 2 (using BOP-2) P0701: 1 (start) P0702:12 Terminal 3+4: Connected to Analog output of the PLC  Terminal 5: connected to 24V via a relay which is controlled by the PLC DIP switch1 on (analog input1 with 0-20mA) When I turn on the relay to power to terminal 5, the inverter runs about 5 seconds, then stop automatically while terminal 5 is still powered. There are no fault and no alarm. I checked the parameter P0947 and P2110 with value 0. Especially, when I set P0700 = 1 (using Start button in Panel), the inverter runs well without stop automatically. Please give me some solutions.