Search the Community

Showing results for tags 'mitsubishi servo'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 440 results

  1. G.READ

    Please help me to find G.READ instruction in Mitsubishi PLC,   Thank you
  2. Hi all,  I am trying to configure an Fx3ge-24M PLC using GX-works 2. I can successfully connect to the PLC using the USB cable, however i am having trouble getting a connection via ethernet. I have attached a photo that contains the only ethernet configuration that i can find, what am i missing here? I'm new to GX works & mitsubishi PLCs.  
  3. Pulse FLow Meter

    i have a paddle Wheel Floweter of TOkyo Keiso W2000. its frequency is 88 Hz .  Flow Rate  30L/min. i want to connect it with mitsubishi fx3u plc digital input as it is pulse flow meter.    kindly tell me how can i determine its pulses for liters.
  4. Hello, can you help me with the following issue: I want to transfer the program/data from an old E1043 HMI to a new one. Tried with HMI Tools File transfer, the connection is established but after initialization and loading I am getting an "Error:Read directory failed." Connection made by serial cable-serial cable / serial cable-USB, result is the same in both cases. Is there something to check in order to make the transfer? Can I use E-designer for this purpose, and, if yes, how? Any suggestion could be helpful. Thanks in advance!
  5. Hi! I have a question about programming. I want to place an input (X01) on the left vertical line, to allow the rest of the program running by an external switch. How can I place an input like that? I work on Gx works2 and using an Fx3g Plc (I used it once, but i can't find that program.)
  6. Hi everyone. I have project to use PLC Mitsubishi Q03UDECPU with QJ71EIP71 to connect with SICK FLEXI soft Ethernet/IP (FX0-GENT00030). I have check both manual but when I turn on Y0 (communication start) there are error code F100h on my QJ71EIP71 and I check that it can only use with produce/consume tag from PLC (such as OMRON, Allen Bradley) but for SICK device it can use only for assembly instance. Then I have use Ethernet/IP scanner (Molex) to read attribute (service code 72h) then I can read status from SICK but as I told before QJ71EIP71 can only communicate with tag-based. Then I have to ask everyone that 1. Are there method that can use QJ71EIP71 to communicate by use Assembly Instance? 2. Could I set consume tag name on FLEXI soft Designer? 3. Are there any protocol gateway device that match with these solutions?
  7. Hi, We are develop the application in Visual Basic 6.0 for Mitsubishi Q series PLC. (MX OPC Server- Middleware.)   In Visual Basic 6.0  sometimes the data flow is failure so we are not able to do process further. Please provide the SDK for the  (.NET  Microsoft Visual Studio 2015 versions) Regrads, Vanchinathan.K  
  8. Virtaul Axis - Simulation

    Is it possible to simulate a servo axis in Sysmac Studio? Can you create a virtual axis and then set velocity & position for this virtual axis? If this is possible, is there an example program that anyone can share with me? Thank you. Happy new Year! 
  9. Getting this error while adding MC_TorqueControl. I want to control torque from HMI value. Using R88D-1SN08H-ECT drive and R88M-1M75030T-S2 Ac servo motor with NX1P2 PLC. Newbie Here. Please support. Error    1    The Axis parameter of the MC_TorqueControl instruction does not support single-axis position control axes.    Program1 Section0    Row 6  
  10. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. Feel free to contact me. https://plc-online-training1.blogspot.com
  11. Hi Friends,     I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. https://plc-online-training1.blogspot.com
  12. Mitsubishi & Siemens OPC connection

    Hi All,  I am undergoing a project that requires me to connect a siemens s7-1200 with a Mitsubishi FX-3GE PLC using OPC UA. I was under the impression that Kepserver ex could do this, you ca install a 'mitsubishi suite' and a 'siemens suite' which will allow the kepserverex server to choose the drivers and connect the two plcs. Siemen's support however have told me that the s7-1200 CPU cannot function as an OPC client, and just as a server? If true, I do not understand how to get the mitsubishi FX to be a client to the siemens server, as kepserverex seemed to provide a solution.   
  13. Mitsubishi FX 3gE & OPC?

    Hi all. I am trying to connect up a Mitsubishi FX 3GE and Siemens s7-100 using OPC. I have been told my siemens that the FX series of Mitsubishi cannot talk over OPC, has anyone ever managed it? I find it hard to believe a fairly recent PLC cannot use OPC. Cheers!
  14. Hi there, I'm unable to write to my plc (FX5U-80MT/ES). Error LED is continuously flashing. Gx Work3 diagnose tells me ''CPU File not found, ...''. I just don't know how to rewrite/reset the CPU File. I spent days to read a bunch of iQ-F manuals to find out, but no luck. I'd appreciate any help to fix this issue.
  15. Hi all, how can I read data from Mitsubishi PLC (model Q04UDVCPU) using TCP/IP socket communication? I can connect to the PLC (using an address and an open port) but I cannot retrieve any data. Thank you.
  16. Hi Omron Experts,  I am connecting mitsubishi HMI with Omron nj101 plc via ethernet, pl tell how to connect tag data of Omron plc to the hmi
  17. stf and stop on at same time

    i have a 800 series vfd drive that when trying to start has the STF function and stop on at the same time, does this sound like a plc issue or a wiring issue?
  18. Hi, Friends any one have FX5u cclink ms with ifm io link project .. sample backup and setting please share with me.
  19. Hello,   I have  a project where I need to run 2 Omron Servos 1S at same time with 1:1 ratio. I created virtual servo axis and attached my 2 physical axis to virtual one ( screenshot from Sysmac studio attached). For some reason when 1 of the axis has a fault, my whole virtual axis goes down. For recovery I need to to do GearOut and GearIn again. In one of the moments I'm losing count in my motion that cause issue later. I believe that I'm doing something wrong.  Can somebody help me to understand how I can keep my synchronized axis all the time? Thank you in advance!  
  20. GX Configurator 2.01B

    Hello all,  I'm have an issue with GX configurator, I have a project which includes devices connected to plc (R08) and when I add them manually in GX Configurator and then load to PLC I'm getting connection. But when I want to run diagnostic or detect devices through network detection I'm always getting timeout error: status 33. Anyone got the same problem or know how to solve it? 
  21. FX3U Analog Programming

    Hi,  Anyone can help how to program a analog coming from a level transmitter? I have 8 analog inputs (2 unit of FX3U-4AD) to be read out into the plc program. how can this be possible. I'm new to mitsubishi analog. it is different from my experience(using siemens before).   Hope someone can help.   Thanks!!!   Marky
  22. Hi all,  Does anybody know if GX works 2/3 has the capability to record all inputs and outputs as they happen live? intermittent fault and this would leave it alot easier..looking to wait until the fault happens and then review the I/O that happened just before.  Thanks in advance.  
  23. CP1L PLC to GOT2103

    Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you
  24. MR-J4-60GF-RJ Programming

    I am new to Mitsubishi (only done Allen Bradley) and Im tasked with programming a MR-J4-60GF-RJ servo drive with a HG-SR motor. I am using GX Works 3 and have a R02CPU and I am wanting to use CC Link IE Field Basic communication with this. Do I have to use the point table to move this motor from "Point A-B" or can I send absolute positions, speed, etc to a given position. Any advice/programming examples would be great. 
  25. Hi all, I want to connect FX3G PLC to a network. So I have installed FX3U-ENET-ADP to the left side of the FX3G PLC using FX3G-CNV-ADP. Can someone help me how to change the IP address of the PLC according to my network IP address (let us take it as 192.168.0.50). So now I want to configure the PLC's IP address as 192.168.0.30. I tried using the FX-Configurator-EN but I could not establish a connection with the PLC through it. Here are the snapshots of the process I followed.   But when I do the 'Connection test', I'm getting the following Error message. I tried to connect with both Serial port & USB. But it is showing the same error.   I'm aware that there are lot of discussions happened in this regard, but I could not find the solution part to the problem I'm facing. Kindly guide me please. Best Regards, Vijay