Search the Community
Showing results for tags 'mitsubishi fx3u'.
Found 398 results
-
i have a paddle Wheel Floweter of TOkyo Keiso W2000. its frequency is 88 Hz . Flow Rate 30L/min. i want to connect it with mitsubishi fx3u plc digital input as it is pulse flow meter. kindly tell me how can i determine its pulses for liters.
-
Hello, can you help me with the following issue: I want to transfer the program/data from an old E1043 HMI to a new one. Tried with HMI Tools File transfer, the connection is established but after initialization and loading I am getting an "Error:Read directory failed." Connection made by serial cable-serial cable / serial cable-USB, result is the same in both cases. Is there something to check in order to make the transfer? Can I use E-designer for this purpose, and, if yes, how? Any suggestion could be helpful. Thanks in advance!
-
Hi! I have a question about programming. I want to place an input (X01) on the left vertical line, to allow the rest of the program running by an external switch. How can I place an input like that? I work on Gx works2 and using an Fx3g Plc (I used it once, but i can't find that program.)
-
How to connect Mitsubishi PLC with QJ71EIP71 and SICK FLEXI soft Ethernet/IP
Wasan posted a topic in Mitsubishi
Hi everyone. I have project to use PLC Mitsubishi Q03UDECPU with QJ71EIP71 to connect with SICK FLEXI soft Ethernet/IP (FX0-GENT00030). I have check both manual but when I turn on Y0 (communication start) there are error code F100h on my QJ71EIP71 and I check that it can only use with produce/consume tag from PLC (such as OMRON, Allen Bradley) but for SICK device it can use only for assembly instance. Then I have use Ethernet/IP scanner (Molex) to read attribute (service code 72h) then I can read status from SICK but as I told before QJ71EIP71 can only communicate with tag-based. Then I have to ask everyone that 1. Are there method that can use QJ71EIP71 to communicate by use Assembly Instance? 2. Could I set consume tag name on FLEXI soft Designer? 3. Are there any protocol gateway device that match with these solutions? -
Develop the application in Microsoft Visual Studio 2015 for Mitsubishi Q series PLC
Vanchinathan posted a topic in Mitsubishi
Hi, We are develop the application in Visual Basic 6.0 for Mitsubishi Q series PLC. (MX OPC Server- Middleware.) In Visual Basic 6.0 sometimes the data flow is failure so we are not able to do process further. Please provide the SDK for the (.NET Microsoft Visual Studio 2015 versions) Regrads, Vanchinathan.K -
Dear all... I am new here. I have a problem when connect my laptop to new PLC FX3U series. There was sign that I must update a driver for FX3U-USB-BD. Where can I get it for free? Could anyone here help me to share a link please? thanks! Haniv
-
Hi Friends, I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. Feel free to contact me. https://plc-online-training1.blogspot.com
-
Hi Friends, I am doing online PLC HMI training for mitsubishi.i am familiar with this Factory Automation product for 10+ years. For further details contact me.. https://plc-online-training1.blogspot.com
-
Hi All, I am undergoing a project that requires me to connect a siemens s7-1200 with a Mitsubishi FX-3GE PLC using OPC UA. I was under the impression that Kepserver ex could do this, you ca install a 'mitsubishi suite' and a 'siemens suite' which will allow the kepserverex server to choose the drivers and connect the two plcs. Siemen's support however have told me that the s7-1200 CPU cannot function as an OPC client, and just as a server? If true, I do not understand how to get the mitsubishi FX to be a client to the siemens server, as kepserverex seemed to provide a solution.
-
Hi all. I am trying to connect up a Mitsubishi FX 3GE and Siemens s7-100 using OPC. I have been told my siemens that the FX series of Mitsubishi cannot talk over OPC, has anyone ever managed it? I find it hard to believe a fairly recent PLC cannot use OPC. Cheers!
-
Hi there, I'm unable to write to my plc (FX5U-80MT/ES). Error LED is continuously flashing. Gx Work3 diagnose tells me ''CPU File not found, ...''. I just don't know how to rewrite/reset the CPU File. I spent days to read a bunch of iQ-F manuals to find out, but no luck. I'd appreciate any help to fix this issue.
-
How to read data using TCP/IP socket (Mitsubishi PLC Q04UDVCPU)
francesco.lastrino posted a topic in Mitsubishi
Hi all, how can I read data from Mitsubishi PLC (model Q04UDVCPU) using TCP/IP socket communication? I can connect to the PLC (using an address and an open port) but I cannot retrieve any data. Thank you. -
I have got a FX3U-16M and -32M PLC and trying to connect with Moxa NPort 5130A serial device server to work with a scada. It seems that i dont get the modbus to communicate. I have tried the 110 ohm, 330 ohm and open setting on the device. I am making use of a 2 wire system. I have configured both the channel 1 and channel 2 of the PLC to work with MODBUS 485. i have written a program like follow M8411 ----------- Move H1087 D8400 ----------- Move H1 D8401 ----------- Move K2000 D8409 ----------- Move K400 D8410 ----------- Move K10 D8411 ----------- Move K3 D8412 ----------- Move H1 D8415 ----------- Move K100 D8416 I just need to test if there is communication from these cards. i have got 15 cards to test. Any other help will also be appreciated.
-
Hi Omron Experts, I am connecting mitsubishi HMI with Omron nj101 plc via ethernet, pl tell how to connect tag data of Omron plc to the hmi
-
i have a 800 series vfd drive that when trying to start has the STF function and stop on at the same time, does this sound like a plc issue or a wiring issue?
-
Hi, Friends any one have FX5u cclink ms with ifm io link project .. sample backup and setting please share with me.
-
Hello all, I'm have an issue with GX configurator, I have a project which includes devices connected to plc (R08) and when I add them manually in GX Configurator and then load to PLC I'm getting connection. But when I want to run diagnostic or detect devices through network detection I'm always getting timeout error: status 33. Anyone got the same problem or know how to solve it?
-
Hello Everyone, Need help with reading channel data of FX2N-4AD with FX3U Cpu. I have added all the logic and it works also. Problem is that, FROM function stop reading/fetching data from FX2N-4AD after some time i.e couple of hours and value just hang. Like 502 or something, untill you reset the whole PLC. What could be the problem. For the further info, -I have connected the FX2N-4AD on the right of fX3U-64M. -There are two extension blocks FX2N-16EX and FX2N-16EYR also added to the right of FX3U-64M -Order of mounting....FX3U-64M > FX2N-16EX > FX2N-16EYR > FX2N-4AD > FX2N-4AD I have tried using the 2nd special module connected at the end, but It showed similar problem after few hours of running. THis shows that both Special blocks fx2n-4ad are okay. There is something wrong with PLC maybe? Please help
-
Hi, Anyone can help how to program a analog coming from a level transmitter? I have 8 analog inputs (2 unit of FX3U-4AD) to be read out into the plc program. how can this be possible. I'm new to mitsubishi analog. it is different from my experience(using siemens before). Hope someone can help. Thanks!!! Marky
-
Hi all, Does anybody know if GX works 2/3 has the capability to record all inputs and outputs as they happen live? intermittent fault and this would leave it alot easier..looking to wait until the fault happens and then review the I/O that happened just before. Thanks in advance.
-
Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you
-
Hi all, I want to connect FX3G PLC to a network. So I have installed FX3U-ENET-ADP to the left side of the FX3G PLC using FX3G-CNV-ADP. Can someone help me how to change the IP address of the PLC according to my network IP address (let us take it as 192.168.0.50). So now I want to configure the PLC's IP address as 192.168.0.30. I tried using the FX-Configurator-EN but I could not establish a connection with the PLC through it. Here are the snapshots of the process I followed. But when I do the 'Connection test', I'm getting the following Error message. I tried to connect with both Serial port & USB. But it is showing the same error. I'm aware that there are lot of discussions happened in this regard, but I could not find the solution part to the problem I'm facing. Kindly guide me please. Best Regards, Vijay
-
Hi: I`m trying to figure out how to log data from my plc fx3u-16m to my data logger fx3u-cf-adp but in a certain period of time. I explain my self: Manuals explain very well how can I write data in my data logger and generate tables but I cannot find how I can set the time period when I want to perform that. I would like to set a data log every two minutes and when errors occurs. Thank you so much.
-
Sorry first up for what may seem like a simple post / question, however I am pulling my hair out with reading the programming manual and have had no help from Mitsubishi's PLC technical support team. I have a Mitsubishi Alpha 2 (AL2-10MR-A) that I am using to count the starts of a jacking pump via input one. The intention is to have output one operate when the jacking pump start count reaches 5 within a 24 hour period. When the 24 hour period has expired, the count will reset to zero. The count will also reset to zero when a manual keypad key is pressed. I have been able to figure out the counting and reset via the keypad no bother, however, including the 24 hour clock reset is proving difficult. Has anyone had any experience with adding the 24 clock function at all, and can offer advice or examples? This is being programmed directly via the keypad. TIA
-
Hello to all I have a mitsubishi electric plc Q-series (q02hcpu) with 2 Position card (qd75m4) for controlling 4 servo motor (mr-j2s-350b). I have a new problem with. PLC after working for a few minutes, The Error light on the CPU and position card turns on and the PLC STOP Working. Please help me fix the problem VID-20190806-WA0004.mp4
