Search the Community
Showing results for tags 'mitsubishi excel'.
Found 373 results
-
Hey Everyone, My company decided to purchase a piece of equipment from China, and I have the pleasure of updating its terrible existing controls. We were given the PLC program by the manufacturer, so I was able to make my changes pretty easily - or at least that would be the case if I could actually connect to the dang thing. The source program is indeed openable and editable via GX developer (the original configuration shows it as an FX3). I figured connecting should be straightforward, but I was wrong. I initially used a serial/usb converter that I've used on some older Allen Bradley equipment (which worked fine for that). However, after no luck using it on the "Mitsubishi", I purchased a different cable that I found recommended on this forum (Tripp Lite USA-19HS - https://www.alliedelec.com/product/tripp-lite/usa-19hs/70101537/?gclid=Cj0KCQiAj9iBBhCJARIsAE9qRtB_n8TVAnJdFyYokoEu42W6H6LaT4kVsgJQI1qvPUsUF3rFviKpbt0aApLHEALw_wcB&gclsrc=aw.ds). Still, no luck. I've tried 7E1 and every baud rate possible, as well as some other bit/parity configurations (and yes, I've verified that I'm using the right com port, as well as tried moving the converter to different ports and trying those). Nothing seems to go through. I have almost no experience with Mitsubishi beyond a couple of FX5s (which have worked fine, but I connect to those via ethernet). Any help would be greatly appreciated; if I can't make these changes, I'm going to end up rebuilding the whole cabinet with a PLC I can rely on. Thanks in advance.
-
Hello, Greetings everyone, I want to communicate RFID with Nexgenie 2K PLC via serial communication protocol (RS 422), I am using Codesys 2.3 software for the development, may I get any sample program regarding this or someone can suggest me how can I implement my program, Thanks in advance.
-
Dear Mr. PLC forum members, I am brand new to the world of PLC’s and I am looking for advice on PLC platform selection for a device prototype. The proposed PLC is for a “smart” hydroponic system. Please see system I/O and other parameters below. Parameter 1: Price - I am self-funding this so price of PLC and software is important. Happy to spend ~$2000 for PLC; I/O cards and related hardware. Total prototype cost is around $15,000 including PLC. Parameter 2: Availability & Support in Australia. Parameter 3:Newbie Friendly: I intend to code the PLC myself and have never coded a thing in my life before. Parameter 4:Discrete Outputs: 11; Discrete Inputs: 0; Analog Outputs: 2-3; Analog Inputs: 9 Parameter 5: Capability to extend to IOT for remote access control and monitoring (via cellular or wifi router) As you can see, this is a relatively simple automation project. All my research seems to point to Automation Direct’s BRX PLC but I just wanted to get some suggestions and feedback before purchasing. Anything else that might suit my needs? Any insight would be greatly appreciated. Bruce
-
I need a key pad which can be used for numeric input, can anyone provide any sample program. Thank you.
-
Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
-
Hello All, Semi-noob here with Mitsubishi PLCs. I'm starting a project in which we are upgrading an existing A Series PLC with the Q. Is there a datasheet somewhere that lists compatible software within Mitsubishi's lineup? I had no luck in searching their site. Also, (in the same project) the existing network uses DeviceNet. I have the Q series compatible card for that - but within what software does one configure the network? Thank you.
-
Hi I'm facing vibrating issue in servo motor (11KW) used in x axis, it makes noise while it stops after positioning. While positioning happend it operates smoothly, in the stand-by position only it starts vibrating. I'm using manual tunning mode (Abnormal noise occurs in jog operation and stand-by position only)
-
Hello Everyone I have an issue with a Got 2000, im updating and adding some screens in a old HMI application with size was about 47 MB, as im still updating i wanted to test the application which now sizes about 52 MBbut is not possible due to the shortage of ROM and RAM, what can I do in this case as the application must be in the built-in Flash memory which is very limited? Thank you in advance
-
Dear Sir, Good day. I facing difficulty on using proface to print out the data using serial printer. I did follow all the instruction on proface reference manual but still fail to print out anything. Anyone here having experience on this issue? Thanks.
-
Control List Rockwell, GE, AutomationDirect
Masen_Suhadolnik posted a topic in Allen Bradley / Rockwell Automation
I'm a young Controls Engineer at an integration company, and I need assistance. I have a client that has about 330 different alphanumeric product numbers broken down by length and width. The operator must be able to select the product number at the HMI to pass along to the robot we are integrating. Is there a way to be able to have the operator select the product number simply, without having to scroll over 300 items in a single control list. The HMI is not chosen yet, so it can be GE, Rockwell/AB, or Automation Direct, but we are using a AB ControlLogix Processor. Racking my brain and I have little VBA/Scripting experience. -
Hi all, I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?
-
Hi all I need help with communication between Mitsubishi L06CPU-P with Siemens S7-1500 by Modbus TCP. It's necessary to send data from L06CPU to S7-1500, but I don't know anything about mitsubishi and gx works2. Picked up some pics how I did it, but I didn't verified how it works. Can anybody help me with this? https://ibb.co/8KDmg5x https://ibb.co/Jm8shCx edited: I also found LQnUDEModbusTCP_GW2_with_FC_V120 library, but how it works I dont know
-
hello dear team, im trying to make a back up for some FR-E700 with the FR CONFIGURATOR SW3 but when i start the communication with the USB cable the software cant recognize any port by the way im using windows 10 in my laptop and when i check the devices administrator it doesnt shows in USB ports the drive info just in other devices and in details shows: "USB device was not migrated" does anyone know what can i do?
-
Hi, I am trying to establish communication between master and slave through modbus rtu rs485. But I am experiencing error code 7378h. I already tried to make the values of Request Interval Timer from 100 to 200 and Broadcast Delat Value from 50 to 100. But the error still persist. Any tips how to solve this issue? There is no error on the slave evices.
-
Missing components in module list when configuring Mitsubishi CC-link
kimdinhthaibk posted a topic in Mitsubishi
Hello everyone! I've installed GX works 3 according to the instructions in "https://plc4me.com/gx-works3-v1-308q-mitsubishi-full-real-100/". I don't get any errors, I can run the PLC and simulate completely OK. In the communication test, when the configuration is missing some components in the module list: Input, output, I / O module,... (https://ibb.co/ZVMcmQn) I hope you can answer for me? -
Dear members , 1.)I have sensor which i read it from analog input (0-10v) specific value and i will pas it via analog output (0-10) to controll VFD for air spped controll . so i'd like to keep specific value for example i will set value 260 , so if analog read les that this value than analog output increase voltage to analog output , if analog read more than this value output decrease voltage . 2.) i have Digital to analog register D8096 which 0 value means 0 volt and 4090 means 10v , so when i need to pas value to i make MOV D200 D8090 , is there a posibility to limit write value to D200 to not pass 4090 ?
-
Hi Guys, I need help to set up modbus tcp/ip parameter for Q03UDVCPU, i want to use the predifined protocol and built in ethernet port. do you guys have some usefull references how to setup modbus tcp/ip, or is there any example program from mitsubishi? Thanks
-
Designed a SCADA System using VB.NET. Everything working fine but coming to performance getting 2 to 3 seconds delay. Using FX3U32m Plc with ENET Module for Data reading and writing. I am having 200 addresses to read. Using MX Component as communication interface between PLC and SCADA. Is there any alternative or solution for this problem. Using one timer to read all data and update properties based on received data. Thank you..
-
Please help how to set the language I'm using Windows 10, the comment and program origin is from China. Im using GX Developer sorry I dont know why I cannot attached a photo.
-
Hello Members. I am trying to read Counter values from FX3U PLC using VB.net AxactUtlType Library. But i am not getting those values from PLC. I am getting Memory and Analog data but not Getting Timer and Counter Data How we read that data? Thanks in advance.
-
Hi all, I am not a PLC expert but can find my way within the program and would like to develop much more. For work (We sell industrial bandsaws) we have purchased a Posital Fraba wire encoder, and we would like to hook it up to our Mitsubishi FX3G PLCs to measure at what height the saw bow of the bandsaw is at that moment. Unfortunately I have little experience with connecting these things, as other encoders used in our machines are pre-installed by our factory. Below is described what functions the wires have. What I thought was the following: Pin 1 goes to an input of the PLC Pin 2 goes to + (or 24V) Pin 3 doesn't go to "Ground" as they describe, but instead to - (or 0V), which is technically ground Pin 4 and 5 we don't use, correct me if I am wrong. The saw bow goes up and down only, and I thought we don't need to use these wires. I connected it like this, connected wire 1 to X0 on PLC and just to test I made the program read: M8000 ------------------------------ C235 k99999 But the value stays 0, whether I pull the wire or not. So something is wrong, but what, I really can't figure out. Hope someone can help!
-
Hello everyone, As the title suggests I am trying to display on a GOT1000 the real time frequency that the inverter is running at. I have attached my CC-Link settings and the associated programming as well. I tried using the example program from Mitsubishi but I got lost. From my understanding I should be seeing the output frequency in W3C4 however, I am not receiving any data. Any help would be appreciated.
-
Dear sir, Good day. I using SFRD instruction to read all the value stored when the sensor trigger. When the SFRD instruction is end(whe the word device number goes to 0), it will move the value to my store value and change my store value. May I know how to stop it to overwrite my store value?
-
I cannot use register D128 - 255 in the program with the Block function
phucPLC posted a topic in Mitsubishi
Hi every one ! I cannot use register D128 - D255 in the program when I create a program that uses the Block function in the PLC mitsubishi FX1S, it gives an error : A device of the device range set in the device/label automatic-assign setting or a device which cannot be used due to system reservation is being used.Help me,Thanks ! -
Hi Mr.PLC Members, I have Mitsubishi FX16MT unit, I'm trying to transfer programs to it using melsec medoc version 1.64b but I can't I'm receiving error "no reply from PLC system",I'm using 25 pin to 9 pin cable and I tried also to connect it with usb to serial cable but the same error appeared my setup: PLC system FX Bit rate 300 word length 7 parity Even stopbits 2 "windows XP" Attached are photo of my unit with my cables and the error of the program
