Search the Community

Showing results for tags 'migration'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 3 results

  1. Hi everybody, Can someone help me, to solve my problem with migration proram From Mitsubishi A0J2 to Q02HCPU. I want to migrate from the old A0J2 PLC to the new Q02HCPU. I used the migration tool A0J2 convertion support tool, i did everything according to the instructions. Unfortunately, the program on the new Q PLC works incorrectly. I attach a printout of the old program from A0J2 and a new file from GX Woks 2. Old_A0J2_and_New_program_Q02HCPU.zip
  2.   Hi all, Iam currently working with a migration project from Rsview32 to FTView. I was able to convert the RSView32 SCADA to FTView successfully. Current scenario is like RSView32 (which was the existing pcs) SCADA is running in two stand alone PCs and Iam trying to line up the new Factory talk view SCADA in another system.Communication is taken from same ethernet switch to which all ethernet cables from 5PLCs in the field are terminated and from which RSView32 scada has taken itz communication. PLCs used there are 2 No.of  1747 L532E slc 5/03 OS302 Ser c Frn 10 & later and 3 Nos of 1747 L533E slc 5/03 OS302 aer c Frn 10 & later. communication taken via net eni (1761 NetEni) Ftview installed system is Windows 10 pro OS) Issue is while RSView32 scada is working properly, Factory talk view is not getting neither online tags nor able to play display for those linked with L533E processor.But everything is fine with L532E processor. I just tried with downloading L533E program to L532E processor and everything was getting. So am i missing something or what should i do to get proper communication with L533E processor.   plz help..Iam a beginner in this field.
  3. Good day everyone, As everyone knows, NB designer is not as good as CX-designer in general terms. My case is this one:  All systems at my company use NS series and some of them NT series PT's.  So there're 20 of them, or so.  Now, I have bought a new NB5Q-TW00B, and I need to program it. Is it possible to migrate the program from a NT or NS, to a NB ??  I've read you have to design all the project again.  It'd take value time just to copy the same project.  I think it should, because it's the same brand of Operator Panel, Omron.   Thanks.