Search the Community

Showing results for tags 'legacy tag database conversion'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 43 results

  1. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  

  2. mitsubhishi serial drivers

    minal pai posted a topic in Mitsubishi

    Hello write now i am working with Q6UDEH PLC  project in which (nextgen 2000) 6021 card is used for conversion of serial to Ethernet data & vice versa , is it possible  by only installing the Mitsubishi serial drivers ?? or can anybody tell me how these Mitsubishi serial drivers works ??  
  3. I want to create a database that keeps track of all of the different PLC and automation hardware (Remote I/O, Flex I/O, Robots, etc.). It would include data such as firmware version, when the backup battery was last replaced, location, etc. I have started doing this in MS Access but I was curious if anyone knew of an existing software that already does something similar?
  4. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and dim_length.data[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  5. ello.I am Melani. I working on to convert Siemes S5 code to Logix5000.Following is FB that need to convert.Segment 1Name :John0005 :C DB 2100006 :L FW 400007 :T DW 20008 :L DW 60009 :T DW 1000A M001 :L KB 0000B :O DW 1000C :T FW 0000D :L DW 1000E :L KB 2000F :+F0010 :T DW 10011 :L DW 80012 :<F0013 :JC =M0010014 :L DW 20015 :T FW 400016 :C DB 1500017 :L KB 00018 :T DW 10019 :T DW 2001A :T DW 3001B :***How to convert this code to Logix5000 either structure text or ladder logic?Thank you if anyone can help me to convert it.Thank you.Melani
  6. Hello, I'm not sure if I should make some presentation first but as time is always short i'll just expose the doubt. Unfortunately because of a technician misunderstanding I ended resetting/erasing the PT software after a full memory error. The SW2 switch 1 was used and the system screen data program was erased instead of the program client data. So all the screens menus buttons etc were lost. Unfortunately there was no copy of the application but a similar machine was found were a different screen (NT21-ST121-E) was installed and by luck the programmer technician used the same file from the machine I'm dealing with. I suppose he might have done some modifications to make that machine able to deal with the same and different objects too. But the base menu screens seem exactly the same. In fact the screen buttons appear to be miss aligned as for a smaller screen, so for sure He used the same application. Now the problem is that the NT- Series Support Tool 4.82 only allow auto-conversion of the applications to a recent model. Example, if a make a NT20S application and change the PT type to NT21 it asks for conversion confirmation and all goes ok. (It will need to set Clock Address that I don't know which to chose). But this Is not what is the problem. Problem is that after uploading the application from the NT21 of the other machine to the NT Tool, I can't just download it to the NT20S PT. And if I go to the PT configuration menu it will only allow me to chose another higher model of hardware. Earlier hardware models won't even show in the list. Is there any tool I can use to convert back the NT21 application to the NT20S?   Regards.
  7. Hello All, I am using Wonderware InTouch 10.0 on Windows 7. It's slightly outdated, but its what we have. I am currently writing a script using the StartApp command to open a particular PDF file with the touch of a button. My script looks like StartApp("C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroRd32 C:\1.pdf"); The first part of the command runs adobe and the second part of the command opens the particular file "1". What I need to figure out is, how do I insert a variable into a string. For example I have 55 files I may potentially need to open up, all named 1-55. So I need the file I am calling to be a variable inside of the string so I can call it inside of a loop. I do not want to copy and paste this code 55 times, I want to make the file name a variable (tagname that is a memory real between 1 and 55) so I can run it in a loop. I have only been using Wonderware for a month or so now, so If anything is confusing feel free to ask. Thanks!
  8. Good morning everyone!   I tried to open an older project with Factory Talk View ME which was last opened with “FactoryTalk View Studio 5.0 “. The current version that I have installed and licensed is Release Number 9.00.00 (CPR 9 SR 9), Patch/Pack Number: 00, Build Number 241. Upon opening the project, I receive the following error message:   “The target HMI project is a legacy project (Factory Talk View v6.00 or earlier). Please use the legacy Tag Database utility to convert its tag database to the new format (Factory Talk View v6.10 or later) before opening the HMI project on a computer running on a 64-bit operating system. Refer to Help for guidance.”   I tried to use the Legacy Tag Database Conversion tool, selected “Create Factory Talk View Tag Database in new format”, then I selected “Factory Talk view Machine Edition”, selected the source folder and used the option to “Search Sub-folders”. After hitting the Next button it shows a list of available projects, but the one project that I try to convert is not listed.   Any ideas how to approach this? Is it possible to install multiple revision supports with Factory Talk View? So, far I always used the latest and just created the run time as an older version, if the panel I used wasn’t updated.   Please let me know what you guys think I should try.
  9. I am using FactoryTalk View Studio SE 8.20 to develop SCADA Application, and whenever I tried to open Tag Database it shows error "an error occurred while attempting to open the tag database editor" and not able to Open Tag database. Does anyone know solution for this? Error Screenshot Attached

  10. Invert scale 0-990 --> 990-0

    Chickenkiller91 posted a topic in CX-Programmer

    Hello.  I have a D word number 0-990. I would like to convert it to 990-0. So i need a function which shows me 0, when the D100 is 990, and shows me 0 when the D100=990. And of course for the between values also. Calculating continiusly. Help is much appreciated :)
  11. Would someone please help me how to convert an integer to ascii?   For example if the output tag is an ascii string, of 3 characters and my numeric input is integer.   When user input a value of 5, I would like the input value to be convert and assign to output ascii string tag of "005".  How do I set the conversion format in either tag assignment or tag expression?
  12. Hi, this is my problem, I created an app on FT Administration Console, in fact, one for network and one for local, I changed the connection to local on Log On FT, but, when I try to define the data points on Step 3 of configuration checklist, only shows me the network app, i select the app, after click OK, the FTTM freezes, anything else happens, I don´t know what am I doing wrong.  
  13. Where can I dowload the zip file of the Rockwell "Legacy tag database conversion utility"?, anybody can help me?
  14. Hello everyone, I hope you are all doing very great, I'm new to Schneider PLCs and I have a project that I need to work on, so I will need your help with the following issues: *) How can one determine which Schneider PLC series is used if you only have a fuzzy picture of the PLC ?  *) I need to setup a historic of alarms, I have 13 PLCs, no connexion between them... I was thinking about creating a connexion between those PLCs and a database, so I need your help to determine a list of ALL the materials i will need (from cables to servers to a computer if necessary...) and some documentation on how that can be done... Thank you so much for helping me, Best regards
  15. I'm in the process of converting an old Siemens S5 project (with no comments!) to ControlLogix. My first question is in the S5 there is the odd instruction with a '#' in it: - -] [ - - - - (#) - - - - ] [ - - - - -(F00.1) In old logix the # means a file, what does it mean in Siemens speak?   My next question, I have the rockwell document for structured text and also for converting S5 to logx, is there any other resource that would help me understand Siemens structured text?   As I chip away at the project I'll be posting more questions. Thanks in advance for your help.

  16. Modbus TCP Data Logging to Database

    gclshortt posted a topic in HMI & SCADA

    Here is a recent post that I would like to share. Using Visual Basic 2015 we will log three holding registers from the PLC along with time and date into a Microsoft Access Database. We will log every minute into the database with the information that we collect from the PLC via Modbus TCP (Ethernet). All code will be done and shown so you can implement this in your application with different parameters. The information collected in the database can then be distributed or analyzed in the future. Visual Basic 2015 will be used with the EasyModbusTCP client/server library for .net. We will communicate to an Automation Direct – Do-More PLC. Using the free simulation software of the PLC Designer Software, we will retrieve three values of the Modbus Holding Registers using Modbus TCP. Once we have this information out of the programmable logic controller it will be placed in a Microsoft Access (2010) Database. This will be done by using a SQL command to insert the data. Read the rest of the post... Let me know what you think, Thank you Garry http://accautomation.ca/
  17. Hi all, Looking to convert older .rss ladder file into newer RSLogix 5000 compatible format. My problem is - I don't have 500 series software (or a computer to run it on) to start the conversion. Any help/suggestions appreciated
  18. http://accautomation.ca/now-you-can-have-robust-data-logging-for-free-part-1/ YouTube overview: https://www.youtube.com/watch?v=6Xa2HYVOxE0 Robust PLC Data LoggerWith traditional loggers, software will read the memory of the PLC and store in a local computer. If the network stops or the PLC communication fails then the logging will stop.Creating a robust PLC data logger allows the communication to be stopped for a period of time without losing any of the data for collection. This is accomplished by storing the data locally on the PLC until communication is restored. All of the data is then read without loss. The amount of time that the connection can be lost will be dependent on the memory size of the PLC and the frequency of the data collected.This series will walk you through the steps to create and implement a robust PLC data logger using the following equipment and hardware. Automation Direct – Do-More – H2-DM1E PLC (Ethernet Modbus TCP)Do-more Designer 1.3 (Simulator instead of PLC mentioned above)Windows based computer running IISVisual Basic 6Regards, Garry http://www.accautomation.ca