Search the Community

Showing results for tags 'kloeckner moeller'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 3 results

  1. SUCOS PS316 connection issue

    Dear forum,  Is there anyone out there with some experience from old Kloeckner Moeller PLCs? I am in need of connect to a SUCOS PS316 and I have found out that I need the original non compiled program code which I have, the programming software ms-dos based Sucosoft S30 and a converter cable from rs232 and rs485 original from kloeckner moeller (UM 1.5-1). I have used both a new computer with VMware and windows 98 and also an old IBM computer with original win98 installed. What I found out is that you need to use 9600 baud rate, no parity, 8 bits and 1 stop bit, xon/xoff OFF.  The problem is that I do not succeed to connect. Every attempt I do I just get “DATA TRANSFER ERROR”. I have also tried different settings for baudrate and parity plus direct rs 232 cable without any luck. I made the settings both in windows and also with mode command in ms-dos. What I can see there is no possible settings to be done in the programming software more than choose correct com port. Anyone have any experience from this old system and have an idea what I am missing and/or doing wrong? Thanks in advance!
  2. Version 1.0.0

    2 downloads

    Features -Supports all Moeller PLC’s using EasyComm Protocol or any other device which uses EasyCommprotocol . -Serail& TCP mode support -Can Connect to all 8 Net IDs -Performance – 2.2 GHz Dual Core - 10 words: 15msecs (avg)   Memory Types Support -P buttons -EasyNet inputs -EasyNet outputs -Analog inputs base unit -Analog output, base unit -MDx, 1 to 20 double word marker -xRN1…xRN32, easyNet Receive data -xSN1…xSN32, easyNet Send data -ID1…ID16, Diagnostic bits -ID17…ID32, Additional diagnostic bits for MFD-Titan -LE1…LE3, Programmable LEDs for MFD-Titan -N1…N16, Additional Bit marker for easy500/700 This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here    
  3. View File Kloeckner Moeller PLC for HMI/SCADA Features -Supports all Moeller PLC’s using EasyComm Protocol or any other device which uses EasyCommprotocol . -Serail& TCP mode support -Can Connect to all 8 Net IDs -Performance – 2.2 GHz Dual Core - 10 words: 15msecs (avg)   Memory Types Support -P buttons -EasyNet inputs -EasyNet outputs -Analog inputs base unit -Analog output, base unit -MDx, 1 to 20 double word marker -xRN1…xRN32, easyNet Receive data -xSN1…xSN32, easyNet Send data -ID1…ID16, Diagnostic bits -ID17…ID32, Additional diagnostic bits for MFD-Titan -LE1…LE3, Programmable LEDs for MFD-Titan -N1…N16, Additional Bit marker for easy500/700 This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software