Search the Community

Showing results for tags 'integer'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 4 results

  1. Hey everyone first post on here, does anyone know if it is possible to convert a string into a double integer. i am working with a dimensioner and it is sending me its box dimensions in a 12 char string (see attached picture). however i need this data as a double integer (it seems to just take the string length not the string value i have tried both dim_lengh and[0]). i have gotten it down to the point where i have the string split up into the dimensions i need but i dont know how to do the conversion. (box dims for reference are 21 X 15 X 14.8) Thanks in advance, Dr. Brule  
  2. I have a problem with converting a server word. I'm trying to put the seconds in my program trough %SW50. But this is counting like this: 0000 0111 = 7 0000 1000 = 8 0000 1001 = 9 0001 0000 = 10 0001 0001 = 11 But i forgot how this is called. How do i convert this to: 0000 0111 = 7 0000 1000 = 8 0000 1001 = 9 0000 1010 = 10 0000 1011 = 11 And is this second style integer?
  3. real to integer number

    Hello, Could somebody give for me advice how need seperate real number to integer? for example I have in D10 real number 10,9 for me need to do integer number 10 and 9. The real number seperate to integer I am using this LADDER line, attached picture. In D90 I got 10, But how to isolate the number of decimal places,I can not think of. Please help for me
  4. I have 14 alarms all addressed to word 200 i.e. 200.** and i want to monitor the state of bits in word 200 such that if one of them is on the coil 204.00 should turn on (Currently i am using the OR operator to turn on bit 204.00 but the task is to use a single instruction to monitor the sate of the 16 bits of a word by comparing it to an integer say #0). I was thinking of using compare to achieve this but i do not know how to compare a word say 200 to a an integer value #0 such that if DW200>#0 then 204.00=on. How can i achieve this and what instruction can i use, am new to omron plc's and am using syswin 3.4 and plc CPM2A. Any help or sample program to achieve the above is deeply appreciated.