Search the Community

Showing results for tags 'help file'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 12 results

  1. CID and ICD file creation. Hi, I have a system that is using a PowerLogic G3200 to convert Allen Bradley MicroLogix 1100 Modbus to IEC 61850, but I am lost when it comes to creating an ICD / CID file. Does anyone have any experience in doing this? I have no help from Schneider technical support, they say the G3200 is not supported. Thanks in advance. Steve
  2. We have Q06UDEHCPU PLC.   We require to attain 1k of file registers in standard Ram. Please find our settings attached - PLC Parameter.png; When we try to down the register file – we attain the following error; “Failed to access standard Ram” error message (attached - Downloading Error.png); The program is very small – and thus we have plenty of space as well.
  3. I am using TIA Portal V14 to program a Siemens Mobile HMI (KTP900 Mobile). I would like to pull up a program 'signature' from the HMI that would allow me to verify that the code in the HMI is the correct version.  This would help prevent an accidental overwrite of old code, resulting in a single Mobile HMI that has differing code from several others that are also in use. The closest comparison would be a Safety Signature from a Safety PLC.  However, I just want to use a file checksum or similar variable that I can put on my screen. Any ideas?  I appreciate it. 
  4. RS Logix Designer Tags

    Hi, Is that possible to define INT data type in EDS file so the Tags for the module in RS Logix Designer would receive INT data type in Input Tags not SINT? As marked in the image, the Logix Designer is receiving data as SINT but I want to have INT data type. Thanks Muhammad Azeem
  5. NTST485

    HI ALL I TRY TO OPEN A PROGRAM .*mmi on the NTST487 ERROR this version of the file cannot be loaded ????!!!!
  6. Hi everybody. I'm just getting started with GX Works 3 and I feel a bit lost. If I have an external help file for my function blocks, how do I register this in the program? I can't find it anywhere when I double-click the fb library or in the e-manual Viewer. The file format is .CHM and I have imported this to GXW2 earlier.   /Niklas
  7. Can Anyone Come Up with the Screen Shots or a video link of procedure for Displaying Real Time Sinusoidal Waveforms From Satec MFM ON GE FANUC?? I have PACsystem RX3i via Serial Communications Module-IC695CMM002 
  8. I believe I have found a bug in FactoryTalk View ME version 8.10. I have a trend object that uses parameter file placeholders on the connections tab. These are direct-addressed to the shortcut ie {[PLC]...}. The historical data from the datalog does not show. (The pens write lines, but when I navigate away from the screen and come back, the lines are gone and begin drawing again from the right side.) The current data does show. This tells me that the placeholders are correct syntax. When the screen loads, the placeholders are being replaced by a string which yields a correct tag path, or else the pens would not be writing correct data. When I replace the placeholders manually and directly address the tag, the historical data does show correctly. This tells me that the datalog is set up correctly and is logging data. I have verified that a previous project of mine, using I believe version 6.0, successfully used this method of using one screen and one trend to plot various tags using parameter placeholders, and the historical data did show correctly.
  9. Hi I have problem to find eeprom bin or hex file to eeprom message memory on XBT-A72101. EEPROM is X28HC64P-12 and its dead complitly (before show message EEPROM FAULT, but after few restarts goes to runnig not now) . I have new empty eeprom and programmer but i don't have firmware file and can't read old memory beacouse not working.  Could be somebody help me with this file. Best Regards. Michal.   
  10. Factory Talk SE CAB file missing

    Hi guys, I recently was asked to configure a computer to host an Factory Talk SE Client application. I was able to get everything working except the trends and the Alarm window, all I have is the cross hatch screen. at the bottom of the screen it is saying cause: Trend: CAB file missing on the server: http://hmi1/RsviewActiveXControlSetup/RSTXView2ocx.CAB. I have worked on this for a while and am stumped. All the other computers on the same domain network are working fine, so it leads me to believe my problem is with my installation on the new computer. Any suggestions or if you need more input please let me know. Thanks
  11. .cin file question.

    I'm fairly new to the world of automation so please excuse me if get my terms mixed up. I think I know the answer to this but its not quite clear in the manuals. I'm on a project that has about 9 CJ2H PLCs that we are doing a re-commisioning job. In each of the PLC files we have backup files and the program files. Some of the PLCs have .cin files for CX Integrator and some don't. Some of the files have routing tables as well. We are wondering if we are supposed to have a .cin file for each PLC and that this a must have file in order for the PLC to comunicate with other devices in the network? If each network is supposed to have one this means that we were not given those files from the original owners and then we need to create new ones. I'm thinking that its not a big deal and pretty easy to setup the network configuration. Anyone out there have any experience? Thanks
  12. Hello! I am creating a project with Logix Designer, version 24. In the project I am using 1734-AENTR/B devices in etherner/IP-bus. I find out that there is only old versions of Logix Designer, only Major version 3 and 4 but the device that I have is the version 5. So I downloaded this EDS-file from Rockwell support-pages and installed it with EDS HW tool. After this, I can not choose this device 1734-AENTR/B with Major version 5. How to get this installed version to the project? After installation I have reboot my programming device and there is not RS Linx running in my computer.