Search the Community
Showing results for tags 'gx works 2 error'.
Found 197 results
-
Trying to log into NA HMI, NA5-7U001B Direct, using USB or Ethernet. All attempts failed .. tho, it was easy to log into the NJ Controller, direct, with USB or Ethernet using the same PC. Then a window popped up.. saying the firmware needed updating in the HMI, and suggested launching the "update" from the same window... Then, after a few minutes. a "update failed" was displayed on the window.. and the HMI screen changed to this: ..and the green LED went RED ... aaaaagh! HMI no longer works... any idea why this happened, or the failure to log in happened.. or, what it will take to fix it? Please tell me it was something Omron did .... Thanks Much, Regards, ,Michael PS: additional info.. I was using Sysmac Studio Version 1.1 .. because I could log in to the CPU (USB and Ethernet) and not the HMI.. I changed to another PC with Sysmac Studio Version 1.17 .. Now I was only able to log into the CPU with Ethernet.. USB login failed. .. and, so did any attempt to log in to the HMI (USB or Ethernet) It looks like if you use a new version of Sysmac.. better not have a device with "old firmware" .. I think it was the V1.17 that presented the window suggesting the Firmware Update ... sigh!
-
Hi there! Today a CP1E-E10DR-D suddenly stopped working. RUN led was off and I couldn't connect to it via USB getting this error: "Selected port does not exist. Select proper port number from Change PLC dialog and press OK button", and automatic online function didn't work as well(it's not a cable/driver problem since I successfully connected to a CJ2 CPU using same cable and PC). Since I also tried to connect with the CPU outside the control cabinet with no success, I asume there is something wrong at hardware level. My question is, have you ever faced something like this? My plan is to try to revive it somehow (maybe trying to locate any defective component in the PCBs or something). So I was just wondering if you have any advice in order to achieve it. Thanks in advance!
-
I am facing the error while compiling the program , there is only 1 error , but not able to figure what is the actual error. Please suggest and support.
-
Hello. I start learn GXW3 and i have problem with simulation. I trying to connect GT Simulator with GX simulator 3, but it's doesn't work. GT Simulator 3 easy connecting with GX Simulator and GX Simulator 2 and it's working. So i can't say that problem in GT Simulator 3, but GX Simulator 3 works too, when i starting it. All software configurated without any errors (IQW,GTW3,GXW3). I using GX Works3 1.026C, GT Designer3 1.151H, IQ works (melsoft navigator) 2.12N. All time when trying to connect, popups this msg. Settings of GTS3 Note from HELP. Does someone know how fix this problem?
-
Hey guys I am strugeling with how to code a autotune algorithm in Gx Works 2 structured text. Does someone have any useful information or code to lend me, this is for a school project please help
-
Hi guys. I was getting Coordinates error popped up everytime I tried to go the page. If click OK, everything is normal and can operate as usual. Just wondering how to eliminate and what causing this error. Thanks!
-
Hi, I have PLC with Error E45. I am not very familiar with Panasonic and in manual, explanation is not very clear for me. Any help appreciated
-
Hi. I use the email block on few of our NJ101-9020 controllers to send out daily reports or any status updates. Recently the PLC's started an unknown issue and fails to send email out anymore. I use the Mail_Send function block from Omron to send emails. The only Error ID i can get is 2005, with status being "Connection to SMTP" failed. Looking at the troubleshooting guide, i cannot find anything to do with error id 2005, in fact its missing. There is 2004 and 2006 but no 2005. I've tried all the obvious thing like, power cycle, redownload the whole project, create a new instance of Mail_Send function block etc. Nothing seems to have fixed this unknown issue. Our IT department did a full check on their side and nothing seems to be out of order. I can still remote into the PLC, so i dont know what exactly is the problem. Has anyone came across this error ID before? Any ideas why this might have been happening? It was working well until few weeks ago and nothing changed and this suddenly started. Any input is really appreciated. Thank you.
-
Hello PLCmaniaccccssss, What is the unit of time in 'average time for the channel -1' (D8284) while programming for analog inputs? I have moved k10 to D8284 in my program in gxworks 2, does that mean the time average will be taken for 1Sec or 10msec or any other time unit??? I require this to eliminate the flickering of the input from the load cell transmitter. Thanks and God bless!!!
-
Failed to open factory talk private directory for the application
Jiggadoo posted a topic in Allen Bradley / Rockwell Automation
Hello! I have been working with a Factory Talk Studio V8.0 and my computer was crashed, "blue screen". After this, I can not open my panel project anymore, I only get information Failed to open factory talk private directory for the application. How to save my project? -
Does anyone have experience with the NE1A-SCUP02-EIP safety PLC? We had a machine shutdown yesterday with a L9n4 error on the NE1A unit. The manual says this is a tag data link error. Does this cause the safety PLC itself to shutdown? I always thought the EIP portion of the safety PLC was only used for status reporting to the PLC. The safety portion is strictly on DeviceNet and is independent of the EIP network. The CJ2 PLC's error log tells me it had problems communicating with the safety PLC, the VFD, and NX I/O's which were all in the same panel going through an Ethernet switch.
-
Friends need help on my plc omron CJ1W-PA202...can't find it's IP and connect with my servo drives
-
Hi I have encountered a problem with CX-integrator. I'm not able to open the program. The following message appears: System error. Save the date and close the application. (Error code 0035) I have tried to reinstall the entire CX-one packet. Any ideas? Regards MBD
-
Hello, GX Works 3 / R04CPU. I'm using the Device Memory so that I can link the HMI to my PLC. I've set aside some memory, in this case D3260, to be used as a Real (32 bits data, Float single precision) to be set by the HMI (operator adjustable setting) and read from the PLC. I thought I'd move D3260 into a local label for readability/testing purposes, and it says I cannot move an Int into a Real - which is fair enough, but, how/where do I set D3260 as a real? Do I use some Functions to take D3260 + D3261 and make it to a real, or define the data area as a real somewhere... Dumb question I know, I'm new to GX Works 3. Thanks very muchly
-
Hi, I am new to this forum and pretty new to programming fanuc robots. I do have one program that is working in production under my belt. The company I work for recently bought a used M-20iA with a R-30iB controller. The robot was tested and worked before it was shipped to our facility. However, not upon start up the robot faults out and gives the error messages: SPOT-474 NM&OUT24v shorted after MCC SPOT-476 Fix Pwr short & then cycle I am wondering if a wire was vibrated loose during the shipment, however I have not been able to find anything in the cabinet. It looks like all of the boards are lighting up and working fine. I have been unable to find any documentation on these particular SPOT errors. Has anyone experience this error and knows how to fix it? Or does anyone have resources that may shed light on the situation? Thanks!
-
Mitsubishi 2400 File set error Q2ASH point step / parameter 1100
rtfmpliz posted a topic in Mitsubishi
Hello to all We have a problem with starting CPU. In GX Developer we click "Diagnostics" and see Error 2400 File set Error. What causes this error? Error code list[Error code 2400] and point to step / parameter 1100 we already have format the memory the last thing not tried yet is : - swap the CPU , (still in process provide by purchasing) - change memory battery (as per suggest by machine vendor) kindly needs some suggestion if anyone experienced this problem, or maybe some tips Applicable machine QnA series PLC ===================================================================================== Error code(SD0) 2400 Error message FILE SET ERROR LED status(RUN) OFF LED status(ERROR) Flashing PLC operating state Stop Diagnostics timing At power ON & reset [FILE SET ERROR] The file specified with a parameter does not exist. ■ Collateral information • Common information: File name/Drive name • Individual information: Parameter number ■ Diagnostic Timing • At power-on/At reset/At writing to programmable controller/STOPRUN Read the individual information of the error using the programming tool to identify the numeric value (parameter No.). Check the drive name and file name of the parameter corresponding to the value, and correct it as necessary. Create the specified file and write it to the CPU module. -
Added new tags to an existing (and operational) PDB file. Using DEMO mode switch (/t) to quickly add without USB dev dongle. When switching from Workspace to Runtime all tags and graphics work. However, when I switch out of DEMO mode and restart iFix, all tags show up as "Not Defined". the IGS OPC Quick Client shows good comms and data with the new PLC sources, so it's not a PLC comms issue.Truth be told, I do not work on iFix very often, so I'm hoping I just missed a simple step.Thanks in advance!
-
I am trying to online edit a program in a MELSEC QCPU, using GX Works2, but I keep getting this error "A file which does not exist in the PLC was specified" <ES:010a4022> Few weeks ago I had just online edited the same program in the same PLC with the same steps with no problem. There had been no changes to the PLC after that. Just all a sudden when I try to edit yesterday I get this error. Not an expert in Mitsubishi, just started learning the basics. Connection to PLC is by USB cable. Steps I followed to connect to PLC: -Online > Read from PLC -Select PLC Series: QCPU (Q mode) -Select PLC side I/F Serial Setting: Serial USB -Select all target program to Read, then Execute I am editing the file that I had just read from PLC Steps I followed to online edit: -Online > Monitor > Monitor (Write mode) -Execute the function below when mode is changed: Checked all -Edit the program (basically just deleted one -||- contact and drew back the line) -Compile > Online Program Change Then Bam! error get! "A file which does not exist in the PLC was specified" <ES:010a4022> I had tried Verify with PLC, but all results match. Is there something I am missing? Help much appreciated!
-
Hello, I am started working on Gx Works 3 recently, actually want to know if I can access local labels from other program body or can call them to other program body?
-
Hi All, Please see attached screenshot: Whenever I want to save the ladder program or start simulation, this window pops-up. If I press 'yes' I loose the whole work. I tried to open existing program and modify it, but it did the same. When I clicked 'yes' I lost all modification and just the original program remained. (I made the program in the morning, opened and saved many times but it started popping this window later.) I work with FXCPU series, FX3U/FX3UC type, simple project in ladder. This worked well but now is not anymore. I use Melsoft GX Simulator! Can anyone advise why this is happening? It is very annoying! It is pointless to work on anything now! Many thanks
-
Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it). So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!
-
MOTOR REPLACEMENT DETECTED ERROR (95.01) ON 1S SERVO
ASHISH CHABHADIYA posted a topic in NJ Series / Sysmac Studio
Is it possible to reset " Motor replacement detected error" ( Error code 95.01) using code without connecting to PLC through sysmac studio? If yes please suggest how to do it... Thanks in advance... -
Hello ! I am an beginner automation engineer and my new task is to export all alarm/events that occured from NS5 HMIs. Is it possible to do this using the pc? I am currently using a card to get those. (using the "hidden'' HMI's menu, accessed by pressing and holding on the display). Thank you very much!
-
I believe that conversion is possible, but have no idea how?
-
I'm trying to simulate the proface HMI and my ladder program using the MX component " communication setup utility". I followed all the steps on a tutorial vid however an error pops'up (check the attached file). i was wondering if you can help. Thanks in advance.
