Search the Community

Showing results for tags 'gs2107 wtbd'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 5 results

  1. Good Morning. I'm budgeting an application with the following FR-F720, FR-D720, GS2107 wtbd, FX5U-32MT / ESS equipment, I would like to know what network configuration for the application, I need accessory boards for the inverters, what physical arrangement it would be better for this application, which network would be used in the application, besides which function do I need to read and write in the inverters? Can I do CC link? If possible indicate materials that I can use to configure this application.
  2. I want to print prn file through mitsubishi 2107 hmi, currently i printing through fx-323bd card by hardcoding the prn in plc .... can any one help me in this regard.
  3. What am I doing wrong? I have an FX3GE PLC. I have set up the IP address 192.168.3.254 and I am able to connect with my laptop running GX Works2 version 1.501X. I also have a GS2107 that I have set up with IP address 192.168.3.18 (Default). I can communicate with my laptop running GT Designer3 version 1.151H. The HMI is still failing to communicate with the PLC. I have followed different threads on this forum, tried different port settings on the HMI. I have attached my settings. Is there anything else I need to set?
  4. Hello everybody, I want make communication PLC FX5U series and HMI GS2107-WTBD. IP for PLC is 192.168.3.250 IP for HMI is 192.168.3.18 I can make upload programs via Ethernet. My Laptop , PLC and HMI are connected toghether via switch. But I could connect data between PLC and HMI. So what must name of device and how to set BIT for example, which must communicate PLC<---->HMI. (bit.jpg) In GT Designer communication also write that i couldn't connect HMI via PLC in red , you can see attached picture. (GS.jpg) smiles : Altan ------------------------ Solved. My error was that PLC and HMI must have different Station Number Special thanks to Piotr Tynor(Mitsubishi, Poland ) , Adam Syrek (Mitsubish, Poland ) , I. Ayvazova (Bulgaria) , K. Raykov (Bulgaria) /you can see atched .pdf file/ MTS0026 - FX5U and GOT2000 (1).pdf
  5. First post on here, I have done some searching and can't find an answer to my problem. I'm trying to start a project in GT Works 3 V1.19, with a 7" HMI (Part No GS2107-WTBD), there is no option to use this HMI in the software. I originally assumed I was using outdated software, after visiting 'my mitsubishi' i found I am using the most current version. So my next line of thought was, that because this is a fairly new released HMI that I must just have to download a GSD file, after searching the Mitsubishi download section, I couldn't find anything there either. Am I missing something obvious?