Search the Community

Showing results for tags 'gs2107 base screen programming'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 53 results

  1. GS2107 BASE SCREEN

    I am new with GS2107 WTBD, please anyone tell how to set the following initial things: Base screen overlap window1 overlap window2  superimpose window1 superimpose window2 Dialog Window Just want to make any new program for HMI, but not able to proceed without above settings.  
  2. ANALOGIC BIPOLAR OUTPUT - HELP

    Hello everyone,   I'm a student who recently started programming, and I could really use some help.  I have a CPU-31 CJ2M OMRON PLC and a ADO41-v1 analogic card. I need help programming an analogic scale with a bipolar signal -10V to +10V to then control a drive, which will then control the motor. If anyone could help me out of give me some examples I'd be really thankfull.   Thanks!
  3. What am I doing wrong? I have an FX3GE PLC. I have set up the IP address 192.168.3.254 and I am able to connect with my laptop running GX Works2 version 1.501X. I also have a GS2107 that I have set up with IP address 192.168.3.18 (Default). I can communicate with my laptop running GT Designer3 version 1.151H. The HMI is still failing to communicate with the PLC. I have followed different threads on this forum, tried different port settings on the HMI. I have attached my settings. Is there anything else I need to set?
  4. We have an install base of about 120 TWIDO PLCs anywhere from 1 to 10 years old with varying configurations, but all using the TWDLCAE40DRF base unit.  Lately (over the past couple of years), we've had multiple instances where upon power being removed from the device, and then turned back on, the base unit fails and will not power back up.  The typical case is that we turn on the power, a couple of LEDs flash for a brief (< 1 Sec) moment, and then nothing - unit is dead. Just wondering if anyone else has encountered the same thing.
  5. PLC Training

    Hi Everyone We are setting up a initial training in PLC programming for technicians, I got some experience with SIEMENS S7 but this seems to be an expensive choice, we would like to opt for a budget PLC but at the same time would like a user friendly software for teaching......I would like to have views of users of other PLC brands such as OMRON, MITSUBISHI or even Schneider??? thanks Jay
  6. Micrologix 1400 Float TAG

    Hello,  I have a micrologix 1400 plc connected to a length measurement gauge. The gauge sends an analog value to the plc to an analog input. I convert the value into a dimension and send it to F8:0. but I need this value in three different steps in the program. Since i just have one element of float (F8:0) is there anyway i can store the value in a different location or create more floating point tags eg. F8:1. F8:2 ?    Thank You   
  7. I have recently come across a free virtual plc simulator called PLC Fiddle. It will enable you to create simple PLC ladder logic code within your browser. This is an ideal way in understanding PLC concepts for industrial automation. All of the basic PLC instructions that come with most plc units have been incorporated in this virtual PLC software.PLC Fiddle is currently in an early stage of development but is functional enough to be helpful to you in learning and understanding PLC concepts.  http://accautomation.ca/plc-fiddle-online-editor-and-simulator-in-your-browser/ YouTube Video: https://youtu.be/G43ZLOwu2dM www.plcfiddle.com Let me know what you think of this for a learning tool. Thanks, Garry
  8. Hello Friends,  I've been writing a program for several days now, Actually I'm an immature for CX programmer and also for plc programming, So I'd like to ask you, if there is any decent way ,,,,I mean a good method of starting to write a program and keeping the flow of it so, it is easy to keep track on what i've been doing from the beginning.??  Cuz sometimes I face the problem of loosing points that were written by myself but not remembering them, So I'd like to learn how to organize my written lines as a wanna be professional.   Thank you   :) 
  9. Good Morning. I'm budgeting an application with the following FR-F720, FR-D720, GS2107 wtbd, FX5U-32MT / ESS equipment, I would like to know what network configuration for the application, I need accessory boards for the inverters, what physical arrangement it would be better for this application, which network would be used in the application, besides which function do I need to read and write in the inverters? Can I do CC link? If possible indicate materials that I can use to configure this application.
  10. Programming cables

    Is there any website that provide all details about programming cables for all PLCs.  I have one local Indian plc "Genie NX" manufactured by GIC India. I want to make programming cable for same. but unable to get details. please let me know if anybody used it? http://gicindia.com/index.html for more info
  11. Hi,   I am using Omron CP1E NA 20DTD with built-in ANALOG inputs and output. I know how to deal with digital inputs. But I have no idea about analogue input wiring and programming. I tried connecting gefran LVDT PY2 directly to an analogue input of plc. But the indicator light did not turn on. Do I need to use any signal conditioner or converter? The output of lvdt is 0 to 25volts. I HAVE ATTACHED THE DATASHEET OF LVDT. DTS_PY2_06-2016_ENG.pdf
  12. Click PLC Series Tutorial

    This Click Series PLC tutorial will give you a good start in learning how to program this controller. Click PLC Series (Automation Direct) System Hardware – Video Installing the Software – Video Establish Communication – Video Numbering System and Addressing – Video Timers and Counters– Counter Video – Timer Video Compare and Math Instructions – Video Program Control Instructions – Video Shift Register – Video Drum Instruction – Video Send and Receive Instructions – Video AdvancedHMI Communiation – Video Create an Analog Voltage Input Tester for a PLC – Video Wiring Testing Analog PLC Input Click – VideoModbus RTU Click PLC Master to BRX PLC Slave Communication – Video If you have any questions or need further information, please contact me. Regards, Garry www.accautomation.ca
  13. Hello I am kind new at Allen B. PLC and i have to make some changes in the PLC program: - add 2 safety switches. - add 4 photo sensor. just want to know what software do i need to make changes online. PLC \I have is  SLC 5/03 1747-L531 also have a touch scream terminal that i need to modify   panel view C600   thanks for your help guys.
  14. Hello All, A little bit about my current role. I am currently a Automation and Welding Robotics Programmer ( automotive industry ). I have been programming robotics for almost 4 years at my company, but this is all experience work, no qualifications. I enjoy the role but this is very insecure due to having no qualifications, if the company was to go under. I am currently working out in Hungary on a secondment with my company. The project was the introduction of a second line at one of our other plants. This has gone successfully and will be coming to an end come December.  While i have been here i have been working with a PLC Engineer ( Contractor ), After speaking with him about his role it intrigued me and felt it was something i would enjoy pursuing. Unfortunately it appears that he is a "knowledge is power" kinda guy which leaves me unable to learn anything from him.  So i am 30 Years of age this year... So my question is too any of you experienced and hopefully helpful individuals is...  Is 30 too old to start this career? if not then; Where is the best place to start learning about PLC Programming? What should i be learning? What courses are available? - Are there recognised governing bodies for this role? What career path would you suggest? I hope someone is willing to share info / answer some of my questions. Help in anyway would be greatly appreciated.
  15. Hello, I am currently working on programming my first sortation system.  Attached is a blue print of the in feed conveyors and their loadout lines.  As boxes merge together they will be scanned by the barcode scanner.  From there we will be told which lane each box must go down, from the WCS.   My question is, without encoders, what would be the best way to control this system? Counting the packages as they pass through the photoeye? Or setting timers?   Thanks, James Sorting Conveyor Layout.pdf
  16. Good day Please assist me - pertaining to the QSeries GXWorks2 Programming  - and in particular the utilization of the macrocode functionality. The information required includes; [1] Purpose of macrocode (incl advantages) [2] its utilization's effects on the PLC programming memory (it appears that it consumes more programming memory. [3] any reference documentation that could be used - containing specifically information regarding this feature (note most manuals doesn't discuss this)
  17. Hello all, I am still fairly new to this forum and PLC's in general. I am trying to connect a EA9 touch panel via Ethernet to an Allen Bradley Micro Logix 1400 PLC. I am using Ethernet over serial because I need the serial connection to program while using the touch panel. I have given the Panel the IP Address 192.168.1.20 with a subnet mask 255.255.255.0 and I have given the PLC the IP address 192.168.1.10 with a subnet mask 255.255.255.0. The panel is not communicating with the PLC and I have very little knowledge on the subject, anyone's help would be greatly appreciated. The picture on the top is from the PLC and the picture on the bottom is from the C-More program for the panel.
  18. CJ2M-CPU32 and CJ1W-TC002 help

    Hi everyone. l have a project with omron plc but l dont know omron. l have CJ2M-CPU32 and CJ1W-TC002 also input and output units. do you have a example temperature control programme for this device ? 
  19. Starting Problem with FX2N-2LC

    Dear Experts, I have been trying to activate FX2N-2LC temperature control block but nothing could help. I have tried the ladder logic which is available in Mitsubishi manual but this is not any output from the module. Please help me or guide me to get rid over this problem, I am attaching the ladder diagram so you guys will get the Idea to where I am going wrong.   FX2N-2L Program.pdf
  20. FR-DU04 (FR-A500) vs FR-DU04-1 (FR-V500). Programming unit differences. (A VSD question) What is the difference between these units? Why are they not interchangeable. (Other than the fact that the FR-DU04-1 is used for vector VSD applications, and the FR-DU04 is intended for standard induction motor applications. Is this a matter of firmware differences?
  21. I want the older screen editor version of delta HMI( Version V1.05.81). I think this is the only Version in which Delta DOP-AS57CSTD Model is present.  
  22. GOT2000 GT Designer3

    Hi, Is there any way of changing the background color (or pattern) of a Base Screen using Screen Script. The screen doesn't seem to have the same object script options as other components. Or is it hidden away somewhere?
  23. tec

    good day to every body im trying to replace old tuche screen [omron nt20s-st121-v1] to new one [[omron nt20s-st121b-v3]  thay look  indentical and the manuel  show they replacabel] i use nt tool software that i install from cx0ne file . i  upload the data and screen grafix from the old one and i see it on my pc . but i cant download it the the new one,,   i see masege on the pc: [dowload aborted  please refer to error log] the error log write many error like:: memory utillization has exceededthe 96,00 kbyteslimit by73.68kbytes small aplication that i wrote just for cheaking go well and download  i wonder maybe it the nt tool but all the other aplication from that disk cxone work good [plc + hmi +servo ] i hope someone  help mordehay 
  24. Hello,     I am working in microprocessor industries, now I am doing reverse engineering for PPC SECS communication program in Visual C++ 6.0 for Mitsubishi PLC(Model Q50UDEHCPU). Did anyone from you have worked with this program PPC? I need to find out the what are doing each function from this program? Like hostproc, data, mainproc, otherproc, plcproc, qbproc queue, offline, send_c, QBFFunc32.
  25.  Hi, im from brazil and need some help, some days ago i buy a programmer CQM1-PRO01-E beacause one plc CPM2B are deceased, we have another equipaments with this one, but CX programmer not response and de are trying day after day, but with this programmer i want copy and paste the logic from other PLC. Can you help with copy and paste on programmer CQM1?