Search the Community

Showing results for tags 'fuji electric group'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 25 results

  1. Hello im using  EcoStruxure Machine Expert  1.2 and i missing IEC Objects  tab  on the Controller properties. thanks for answers!    
  2. Need some help here. I am trying to link a Panasonic FP0H, using it's Build-in LAN to a Fuji / Hakko TS1070Si. I managed to setup the IP addresses on both devices, able to ping both device's IP using laptop. However when hooking them up and meddled with all possible settings. There is still an error on the HMI " PLC1 Communication Error. Ethernet Error : 205(0)".  TCP connection error Connection cannot be established. Check the communication lines, or turn the power off and on. And on the PLC itself the "Connection Establish Flag is 0"   Anyone ever come across such connection type able to help out?
  3. EPLAN Help

    I am attempting to use EPLAN P8 (v.2.9) to import details from a 'holy grail' excel sheet of a cable list with terminal tags and numbers (source and target for each cable). To do this I began importing details in a trial and error fashion through the pre-planning menu to the pre-planning navigator. I have several questions. Question (1) Has anyone else tried to do this?  In the process of importing from the excel sheet I have not been able to successfully assign source and target for each cable object. It shows up on the synchronization dialog after I work through the field assignment but it disappears after import. ( I do not fully understand the proper structures, definitions, properties and levels to get what I want). I do understand if I import source and target terminals, and cable objects separately, then I can place on the detailed view and source and target are assigned then. Question (2) Does anyone know how to assign source and target to a cable object in pre-planning 'by import'?  (Reason being that the excel file is huge and manual assigning isn't feasible). On one of my attempted field assignment schemes I was able to have cable, source terminal, and target terminal, all on different levels (not actually assigned as source and target for the cable object btw.). However the result for source and target on the report (planning overview, form: f40_006) had all of the designations of the tree structure from the upper levels. For example, cable: HAC4401, source: HAC4401 X1:5, target: HAC4401 X1:5 TB1:5. (Where X1:5 is source terminal and TB1:5 is target terminal). Question (3) Does anyone know how to create a 'branch' or 'fork' in the tree structure in the preplanning navigator so that both source and target terminals (planning objects) are on the same level and so do not inherit each others details?  There's a bunch of info in reading the above I know, but if anyone can shed some light on this it would be much appreciated!!!! Thanks in advance,  MajorMac
  4. Monitouch HMI slow screen

    Hi there! I'm having some issues with a FUJI MONITOUCH V9100iSD HMI that communicates with a CJ2 PLC via Ethernet. This HMI is a migration from a previous V810iSD model. The thing is that the previous model worked correctly, but when using the new one, the HMI seems to be pretty slow when switching screens, for example. All parameters are the same, and after reading Fuji's FAQ, I've run out of ideas. Have you faced the same problem? Thanks in advance!
  5. Hi there! I was working on EPLAN Electric P8 when suddenly, the program stopped working (mouse didn't barely move, couldn't click) which resulted in a blue screen after trying to close the program (didn't manage to force stop of the VMWARE process where I execute it).  So, the thing is I can open projects and all, but everytime I close a component window I get this error window: (S275024) Couldn't find setting USER.SYSTEM.GUI.Control.MGGrid.DeviceTagGUI.116.1002.LastIndex.index. And it happens when other different windows (for example when opening Layer Manager I get the same error with LayerManger instead of DeviceTag. Also, if I try to close Eplan by clicking the red X of the window, It won't close. What can I do? There's very little info about this error code in the net and I'm running out of ideas. Thanks in advance!
  6. FUJI NP1P2 CPU problems

    I am currently working on several FUJI plc's and I am having problems with the d300 software and trying to upload from the PLC's. When I upload the software that is currently on the PLC's and download the software back on to another PLC the equipment it runs will not operate properly. It appears to me that the program is not uploading the values stored in %mw locations that are in the PLC. The problem with this is that many of the settings that control a pulse output on the PLC are being lost and without it the PLC program is essentially useless. The other problem is that the original programmer that wrote this program is gone and the original program is gone to. I really just need to be able to make copies of these PLC's to make some really old equipment operate. Any help with this problem is appreciated. Im really in a bind right now so I will take any help I can get. Thank you to anyone that can help. 
  7. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  8. HI everyone ,  i will be very glad if anyone helps me to clear the doubt . I am using MX component version of 4 to connect with my CCLINK J61BT11N   Board. Is there a way to read group of registers from the CC-LINK . for example, if i want to read from D0 to D5  or write D0 to D5.  is there any function  in MX component which helps to read the group of registers? I use MItshubi PLC .
  9. Hi, This is my first time to start an actual project. I have some basic to intermediate programming background with Seimens PLC in the past but with no work experience. I bought an old bandsaw machine for a very cheap price. It works fine on manual operations but I want to try and test if I can make the fully automatic function back. The current PLC installed in the machine is a Shihlin Electric SEPLC A1-30MR. It look old and the port is not familiar to me. I also have no idea if I can even get the program inside or not. Thus, I plan to replace the old PLC with a new one. Here are my questions. Should I use a PLC or can I just use a digital controller like Logo ? I need to use a loop for counting how many cuts it should do. And how many times the machine should repeat the push of my stock out per cut. What else should I consider when choosing a PLC or digital controller?   Thank you in advance. 
  10. Hi, I've been having a problem with my Schneider setup, and I can't seem to figure out the problem. I'm using Machine Expert Logic Builder and Vijeo 6.2, and I can't seem to download to my PLC. I can download to my HMI just fine, but my HMI comes back with the message as mentioned in the title. Also when I perform a full download, machine expert comes up with the message "Could not connect to the device for item "xx", selected target system "PLC name" is different from the connected device "HMI name". The weirdest thing is that machine expert shows my PLC just fine, but doesn't show my HMI. I have no idea what to do, as I feel like I've tried everything. The IP range is fine, subnet is fine. The driver in IO manager in Vijeo has the PLC nodename in it, so that shouldn't be the problem either. Does anyone know what to do in a situation like this? Thank you in advance!
  11. Hello everybody,   First, I used the BMX NOR 0200H module associated with a GSM modem, for the time stamp and the problem is at the level of data recovery (slave PLC), I received the value of the variable (it's OK), but instead of the modification date of the variable, I received the send date (from the master PLC to the slave PLC).   After this application, I tried to use Web Desinger to do the timestamp by recovering a .csv extension file, but the file does not generate in the memory card (I accessed the module's memory card by an FTP client).   At this stage, the BMX NOR 0200H module, does not respond to a new configuration or a modification (either by Web Designer software or by Web Server, even these last two confirms me by a dialog box that the module has accepted the change).     Thank you all for your attention.    
  12. How I open file bin ihm fuji UG 530h ?

    I need help, I want modification ihm fuji UG 530h , the upload file bin, I am use software VSF edit V6.0, but not open.
  13. Automax Reliance Electric Drive

    I have a Reliance Electric Drive Digital I/O Module 57401 that won't close the MCR contact R1/B3.  I believe I've narrowed the problem to the 4 input signals WDOK, BD INIT, INIT, FAULT on the Multibus.  Does anyone know how to access those signals from AutoMax Executive.  I have also made a breakout cable, out of an old output card to access those signals.  The problem with the breakout board is that P1-16 does not carry over to the empty slots 5, 6, 7, 8 and slots 11, 12, 13, 14 are full with the drive cards in question.  I would also like to find out what drives those signals, especially the Fault signal on P1-16 of the Multibus.
  14. Alice Sales Manager Changsha Zhinian Automation Equipment Co;ltd   Te/whatsapp:+8613341312293 Fax: 0086 0731-82292217   Email: info-zna@zhinianauto.com   Main products: PLC: Mitsubishi, Omron, Panasonic Inverter: Mitsubishi,Fuji, Omron,. HMI: Mitsubishi, Omron,, Proface,FUJI, AC Servo: Mitsubishi, Omron,FUJI Sensor: KEYENCE,OMRON   Air cylinder: SMC Below is our best price product list: MITSUBISHI: 1.MR-J2S/ MR-J3/ MR-ES AC servo pack ( amplifier, motor, cables ,connectors) 2.FR-A700, F700, E700, and D700 inverters 3.GOT1000 and GT1500 Human machine interfaces 4.A, Q and FX series PLC(FX1N/FX2N/FX3U/FX3G/FX1S) plc OMRON: 1.C200H/ CQM1/ CS1W/ CJ1W/ CP1H/ CP1L/ CPM1A/ CPM2A/ CPM2AH plc 2.SYSDRIVE 3G3JZ/3G3MX2/3G3JE/3G3RX Series inverter 3.NS5-V2/ NS8-V2/ NS10-V2/ NS12-V2/ NS15-V2 Human Machine Interface 4.E3JK/ E3JM/ E3Z photoelectric switch 5.TL-Q5/TL-W3/TL-N Proximity switch 6.E6B2/E6C2/E6CP rotary encoder 7.G3NA-205B/G3NA-210B/ G3NB-240B Solid State Relays 8.H3CA/H3CR-A/H3DE/H3DS/H3JA/H3Y-2 Solid-State Timer   Contact me if you are interested, thank you !  
  15. Hi All, I am doing an application that use servo motor to feed plastic film to a target length (set by operator), and it need to stop immediately if marker sensor is ON. This application is control by Omron CP1E PLC. It will feed plastic film in 500-1000mm/s depends on the target length set by operator. It is require to stop immediately if the servo feed length more than 90% of the target length and the marker sensor is ON. However, is there any possibility for the servo to stop immediately once the condition is meet? As I am using PLS2(887) to feed with target length, and INI(880) to stop immediately, however, it cannot get the desired result as servo not able to stop immediately after marker sensor is ON, I am not sure is because of the PLC scan time, or servo need time to deceleration (deceleration rate assigned to #FFFF). Appreciate anyone able to assist on this. Thank you.
  16. Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?
  17. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  18. Are there any good guide books out there that parse down the NEC to the sections relevant to controls engineering and panel building?
  19. So I have been using Tag Groups for a while But I have run into a problem that has me stumped I am trying to get the .value of a tag group item and use it as part of a file path Example   Creating a file name from a tag.value Set MyTagGroup = Application.CreateTagGroup(Me.AreaName) Dim Dfile As String Dim NewFile As Tag MyTagGroup.Add "Recipe\Recipe_FBK_Formulation" MyTagGroup.Active = True Set NewFile = MyTagGroup.Item("Recipe\Recipe_FBK_Formulation") Dfile = "C:\Access_DB\" & NewFile.Value & ".txt" 'name of  file End Sub Now the value of Tag Recipe\Recipe_FBK_Formulation is equal to "CF12GH" and will show that if I drop a string display object on the display But when used as above, Instead of the value, it seems to be trying to use /::Recipe\Recipe_FBK_Formulation as the value not CF12GH So what am I doing wrong  
  20. When creating a tag group, what is (Me.AreaName, 250) defining in the code snippet below? If rpOneTagGroup Is Nothing Then Set rpOneTagGroup = Application.CreateTagGroup(Me.AreaName, 250) Call LoadSiloTagGroup(xSilos) End If  
  21. F-MPC04 RS-485 Protocol

    Hello! Anyone here know about Fuji Electric power monitoring unit F-MPC04? Does anyone have the Communication Manual for this unit? I need to find the F-MPC Protocol which it used with RS-485. I know it is accessible via MODBUS RTU, but there is already a system exist using this F-MPC protocol. It seems Fuji doesn't publish this protocol for public, but there should be a document somewhere :D   If anyone knows please kindly reply here. Thank you
  22. Which one Baldor Motor is best for Industrial purpose like food processing?? Please suggest .
  23. Keybord Shortcuts

    Guys, I am using TIA v13 for HMI programming. Is there any way we can add a keyboard shortcut to group/ungroup the objects? I checked in Options > Settings > Keyboard shortcuts but there is nothing I can use. Am I missing something silly? or Siemens just doesn't allow that?
  24. Guys,  What is HMI Tag group that can be added under the HMI tags in the Project Tree? I am new with siemens and trying to debug an HMI. The error is " ,The parameter of a function is not available for trigger 507 - Analog Edit, event 'Loaded'. The referenced object does not exist.,,,". There is a weird event set up upon loading of the screen which is causing error. Thank you in advance. Please guide me.
  25. Micrex-Sx Fuji PLC

    Hi everyone, I have a Problem with PLC Fuji: Micrex-Sx series (SPH300) control servo FLADIC Alpha system (fuji) through SX-Bus. I don't now I/O assigned off servo FLADIC amplifier through sx-bus, how to control motor run. Anyone have experience with this help me, Please! Thanks so much!